steelslaver
- Messages
- 14,984
- Reaction score
- 44,326
Latest activity Postings About
-
-
I am the seller and I just got off the phone with the buyer. He is thrilled. He already has the original invoice in his hand from S&W... -
steelslaver replied to the thread Anybody else watch this one?.To a guy knocking down a million a year $10,000 is the same part of his income as $1,000 is to someone making $100,000. The average...
-
steelslaver replied to the thread removal of broken extractor rod.If I had it in hand I could set it up in my mill and drill out the center pin from the star end using a small carbide bit. Once past the...
-
steelslaver replied to the thread Just wondering. Who actually uses the Judge or Governor with shotgun shells?.He could do like I did. I had the barrel off, but you could also just remove the cylinder. After I reamed to barrel to .452 I used a...
-
steelslaver replied to the thread Anyone tell me what I have?.Looking at the small pits on barrel's ramp and sight and the fine sanding lines my guess is someone sanded off the finish.
-
steelslaver replied to the thread Endshake on Model 19-3.Clean inside the cylinder where it rides on yoke, clean the yoke, make sure your gas ring is still fully seated, make sure it is very...
-
The Air Forces side of the story!
-
steelslaver replied to the thread Who's Gonna Fill Their Shoes?.I agree there are lots of great young men and women, but my point is there are not nearly enough. Plus, although the ones now working...
-
steelslaver replied to the thread Sgt. Mike Viet Nam Humor.Drank while singing my Akadu my sweet Akadu
-
Here’s one that I found…
-
There is nothing like drinking a typhoon fifth of Akadama Port wine. It is a really sweet red wine. After a while you get tunnel...
-
Since I will be "Off Line" on the 6th, thought I would post this now.
-
steelslaver replied to the thread Who's Gonna Fill Their Shoes?.There are 11 million workers in the US 55 and older. 90% of whom will retire in the next 10 years, Who is going to fill those well...
-
steelslaver replied to the thread removal of broken extractor rod.If he can get the pin to move he could press it out as far as possible, cut it off flush, then press it all the way in and start a small...
-
steelslaver replied to the thread Non-Registered Magnum..Ditto, and especially when its new home is a member here.
-
-
Loading…
-
Loading…
