Recent content by Technical

You have to let off the sight tool to get the click, push down to get it to move and then release pressure, it'll stop at the next detent. It's more prenounced when turning the front site up than down.

They probably added an extra character to the serial numbers - mine is a DEU built within the last three weeks per the box.

Could be but I doubt a subtle bend makes that much of a difference. The ejector is a bull**** design that's clearly going to get tweaked when cleaning, etc...

Ran an additional 250 rounds through this today, more Aguila and CCI Tactical, no issues at all - ejection is much stronger. Definitely recommend the extractor upgrade, mine was only $13 shipped from ebay.

Installed the Volquartsen extractor and tweaked the ejector a hair (1/16" at best vertically towards the bolt, can't imagine it helped much). Ran about 200 rounds as quick as I could get them out - no issues. The Aguila that I couldn't get to run last time, ran perfectly this trip.

Does anyone regularly stock the springs?

They're all fairly close in velocity and they're all the same weight: CCI AR Tactical - 1,200 FPS MiniMag - 1,235 FPS Aguila SE - 1,255 FPS I'm going to clean it well and try again as I'm sitting on 400 CCI AR Tactical rounds, hopefully they will run. I did order a Volquartsen Exact Edge...

Picked up a new 15-22 sport the other day and it's stove piping. Gun appears to have been built within the last two weeks per the box. Does these have a break in period, do they need lubed excessively? Cleaned and lubed it and took it to the range today. First 100 - CCI Mini-Mags - Flawless...