Recent content by WARCOLLECT

Thanks everbody

Thank you.

I am having trouble trying to find what this is worth.It is 48-4 four inch pinned and recssed. It also has a 22lr cylinder in its own cradle. The case hardening on the hammer and trigger have been buffed. serial #77k9849

A friend has relatives that work at Winchester in East Alton, Illinois. They said they are finishing up their government contracts and starting to ship Winchester 231 and HP 38. Hogdon HP 38 is the same as 231. Both made by Winchester. Winchester Primers are made in East Alton, Il. They are...

I called Winchester customer service looking Win 231. They said they were starting to ship powder they have almost completed government contracts.

I really have it bad I don't need a reason to buy a gun. There are no indians at the door.

I reload rifle brass 5 or so times then anneal to get more life.

They are like dillon.You can't buy repair parts they are free.They stand behind their products.They are very knowledgeable and helpful.Long time to answer but worth it.

I've got 60,000 rounds of 22lr. Why can't the manufactures keep up with the demand.Manufactures hold there price pretty well. After that its supply and demand.Retailers charge as much as they can. I have been finding more primers.Bullets powder and brass are still hard to get.The primers are...

When working up a load.I start with 3 at min and 3 with less than max. I load 5 to 10 different powders. I load many different bullets. check OAL over all length I fill out attached chart . I write the results on the far right edge. I pick out the best results and start working from there.

Be careful cleaning old rounds. Don't tumble you could change the burn rate of the powder.Cylindrical powder could change to fine powder. They could also discharge in tumbler.If they shoot good don't fix em. When getting new data for loads I check several bullet manufactures books.I have seen...

wifes approval I worked at a gun store in southern Republik of Kalifornia called Armory of Orange.We had a sign that read We called your wife and she said it was OK to buy a gun.

I don't reload to save money. I reload to shoot better ammo. I have two dillon 550s and two rock chuckers and a hornady 366 shotgun press. I have six benches. I have seventeen forster trimmers and turners set for dedicated calibers. Case prep,bullet casting and over a hundred greeen boxes of...

45 acp shotshell dies 45 shot shells cases 30-06 8X57 7X57 .270Win .280 Rem 6mm Rem .243 Win .308 Winchester Best for your extractor MAX case length 1.2 large pistol primer 6.2 grains of W-W231 4.5 grains of 700X 6.0 grains Bullseye ? 7.0 grains unique ? Use Lee #069 dipper to measure 110...

45 acp shotshell Step 1 deprime cases step 2 lube case form and cut off I used a power jig saw and file step 3 clean off lube step 4 face case to 1.195 I used forster trimmer with a .400 pilot 3 out of 100 pilot wouldn't fit pilot used .400 reamer have...