Anyone using .40 s&w hornady XTP bullets?

H

hagen_chad

Member
Joined
Sep 4, 2015
Messages
6
Reaction score
0
Looking to load .40 hornady XTP 180 grain bullets over power pistol for my m&p......any thoughts?
 
Register to hide this ad
i have good results with mid-range loads with that combo but also have as good results with the other powders I have tried with that bullet
 
Thanks for the reply.....mind sharing what your mid-range loads were?
 
K thanks......hopefully someone will fill me in that has the hornady manual...
 
My Hornady manual doesn't show any loads for that bullet using PP.
 
Hornady #8 lists: 180gr XTP/HAP/FMJ with Power Pistol

5.1gr/850fps -> 7.1gr/1050fps (.5gr=50fps increments)

.

Reloading manuals make good accessories/investments for your reloading hardware.

.
 
Last edited:
Thanks BLUEDOT37.....I have the new lyman manual but it doesn't have that bullet......thanks again
 
There is the little Lyman load data manual that has 380, 9mm, 40 S&W, 45 ACP.

It list a 180 Sierra JHP with power Pistol powder but does not list as much powder as the above XTP information.......
but I found that is has a "Safety area" with most of its top loads, which is a good thing.

booklet runs around $10 in most sport stores.
Good loading.
 
You must log in or register to reply here.

Latest posts

Back
Top