|
|
|
05-03-2018, 07:05 AM
|
Member
|
|
|
Join Date: Mar 2015
Posts: 3,183
Likes: 9,014
Liked 9,908 Times in 2,006 Posts
|
|
Cleaning casings
How often should casings be cleaned prior to reloading? Is this a step that should always be taken or is it more for clean looking reloads? I'm thinking that one benefit of doing it is that it will help keep your reloading equipment cleaner.
|
The Following User Likes This Post:
|
|
05-03-2018, 07:17 AM
|
Banned
|
|
|
Join Date: Apr 2009
Location: FL
Posts: 1,973
Likes: 2,364
Liked 2,962 Times in 1,115 Posts
|
|
I clean them after every use in a dry mix of walnut and corncob expressly for the reason you stated, so as not to muck up the inside of my dies.
|
The Following 8 Users Like Post:
|
|
05-03-2018, 07:17 AM
|
|
Absent Comrade
|
|
|
Join Date: Mar 2012
Location: Cary, NC
Posts: 3,082
Likes: 12,877
Liked 7,548 Times in 2,081 Posts
|
|
Clean Brass
Bottle-necked rifle cases are much easier to full-length resize if the cases are cleaned prior to sizing.
I clean my handgun cases to insure that no grit is present that might scratch the die. All brass is easy to clean by soaking in very hot water using liquid dishwashing detergent (the kind used in dishwashers), mixed with Lemishine, another dishwashing product. Then, allow the brass to thoroughly air dry. If in a hurry, you may bake them. You may also tumble the brass.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 07:17 AM
|
US Veteran
|
|
|
Join Date: Nov 2016
Location: Oklahoma, on a dirt road.
Posts: 389
Likes: 214
Liked 606 Times in 220 Posts
|
|
I started reloading in the late 1980's. For several years, I merely wiped the brass off with a rag, and loaded. I used carbide dies, and never had a problem.
Keep in mind, this was handgun only.
Then, I started washing the brass first - hot water and dish soap. Rinse, set out in the sun to dry, reload.
After a few years, I traded into a lot, which included a vibratory tumbler. I've been using it ever since. I still wash the brass first, it gets off the majority of the oogies, and helps the tumbler media last longer.
So, my answer to your question is - as often as you feel is necessary.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 07:47 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: S.E. Iowa
Posts: 680
Likes: 288
Liked 731 Times in 309 Posts
|
|
Wet media rotary tumbling produces the best result.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 08:40 AM
|
|
Member
|
|
|
Join Date: Apr 2012
Location: Mpls, Minnesota
Posts: 869
Likes: 87
Liked 972 Times in 400 Posts
|
|
Started using SS pins and tumbling about three years ago - never looked back since. Cases are clean, saves wear on the dies, helps to be able to pick out defects in the brass.
Yes - it does add an extra step, yes - it does take more time but - - - - I have the time and like working with factory new looking brass.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 08:40 AM
|
Suspended
|
|
|
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,485
Likes: 23,623
Liked 26,487 Times in 9,172 Posts
|
|
Why clean the cases? The only reason we HAVE to clean cases, is to remove dirt and abrasive matter and any corrosive chemicals from old primers or Black Powder. The "dark" powder fouling from even the dirtiest smokeless powder is actually carbon, which is a dry lubricant.
The disadvantage to "Super Brand New" cleaning, like Wet Stainless Pins and Sonic is the inside is so clean, it can stick to a progressive press's powder funnel!
Personally, I like the super shiny brass, It is easier to find on the ground!
Ivan
|
The Following 2 Users Like Post:
|
|
05-03-2018, 09:55 AM
|
Member
|
|
|
Join Date: Aug 2011
Location: central, Ohio
Posts: 1,165
Likes: 1,038
Liked 1,305 Times in 542 Posts
|
|
I always clean the brass before reloading.
Crushed walnut hulls and about a 1/3 to 1/2 of a shot glass of 50/50 mix of Nu-Finish car wax and odorless mineral spirits in the vibrator for a couple hours. Makes the brass nice and pretty..
Plus it makes it easier for my old eyes to pick out defective brass, read headstamps,, etc.
A buddy uses a little cement mixer he purchased from Harbor Frieght. A little noisy but it does a nice job and you can do a bucket of brass at a time..
Last edited by old&slow; 05-03-2018 at 10:13 AM.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 10:11 AM
|
Member
|
|
|
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,741
Likes: 186
Liked 3,300 Times in 1,525 Posts
|
|
The only time I have ever cleaned brass was when I was given a bag full of range brass . I have been reloading for many a year shooting mostly revolvers and have yet to really clean my brass . Just a quick wipe down before resizing , sometimes . Regards, Paul
|
The Following User Likes This Post:
|
|
05-03-2018, 10:27 AM
|
|
US Veteran
|
|
|
Join Date: Aug 2006
Location: West Central IL
Posts: 22,822
Likes: 18,616
Liked 22,460 Times in 8,291 Posts
|
|
Clean brass loads easier, won't scratch your loading dies, won't get dirty looks by other shooters. I wouldn't think of putting dirty brass in a loading die.
__________________
H Richard
SWCA1967 SWHF244
|
The Following 2 Users Like Post:
|
|
05-03-2018, 10:32 AM
|
Member
|
|
|
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
|
|
The only time I'm touching dirty brass is when I pick it up, after that it goes through sorting plates and wet tumble before any further processing.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 11:25 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,415
Likes: 3,193
Liked 12,783 Times in 5,696 Posts
|
|
In order to save my pistol brass out of my 9mm auto, I have to
shoot outdoors and pick my cases up from the desert floor.
So this brass needs a cleaning when it gets home.
My revolver and rifle bolt actions just get a wipe down and a cleaner..........
if real dirty, they will get the walnut rub down.
Even brass that does not hit the ground is dirty.....
Just depends on what you think is needed for you next loading adventure.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 11:51 AM
|
Member
|
|
|
Join Date: Dec 2011
Location: South Oregon Coast
Posts: 1,831
Likes: 89
Liked 1,664 Times in 591 Posts
|
|
I've had the same issues with stainless pinned brass as Ivan the Butcher (post #7). They look great but they can be a real bear when the neck is flared on my Turret press.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 12:00 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,261
Likes: 9,424
Liked 8,924 Times in 2,577 Posts
|
|
Quote:
Originally Posted by Shark Bait
How often should casings be cleaned prior to reloading? Is this a step that should always be taken or is it more for clean looking reloads? I'm thinking that one benefit of doing it is that it will help keep your reloading equipment cleaner.
|
I'd expect your cases pick up sand the way mine do out here in the high desert (much different from when I'd shoot back at the range in Indiana in the Eighties), so I would agree with you that cleaning is beneficial to your reloading equipment's continued health.
I tumble my cases in a bunch of rice - rice dust gets on them and seems to "slicken them up" some, but the grit is gone. Every so often (depending on how dirty they're getting with my loading and range conditions) I'll chunk a bunch of particularly grimy cases into a large laundry soap jug (there's always a bit of soap left in there), fill it with water and agitate the heck out of it. Then I'll rinse the cases in a bucket and leave them to dry on newspaper on my driveway pad under our arc lamp New Mexico sun - they're always dry in an hour, and they look great.
__________________
Now go make God proud...
|
The Following 2 Users Like Post:
|
|
05-03-2018, 12:43 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
As noted, it is about NOT putting grit into your reloading dies. Cases just need to be clean though, factory shiny new is a bonus, curse at times. For years I just rolled my empties in a damp towel. I only loaded 100rds of 357mag a week. Then I went to a dry tumbler, just easy & if you add a polish, it leaves a thin coating that helps in sizing. Wet cleaning is fine, but IMO< they are too clean & really make things more diff during reloading & powder charging on a progressive.
__________________
NRA Cert. Inst. IDPA CSO
Last edited by fredj338; 05-03-2018 at 12:44 PM.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 12:59 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Florida
Posts: 6,652
Likes: 3,424
Liked 9,330 Times in 3,506 Posts
|
|
I gave up on shiny brass long ago. Just get the grit and crud off them now. I always clean before reloading. But then if I forget the tumbler is running in the garage overnight...
|
The Following 2 Users Like Post:
|
|
05-03-2018, 01:26 PM
|
Member
|
|
|
Join Date: Aug 2011
Posts: 80
Likes: 78
Liked 130 Times in 43 Posts
|
|
I handloaded for decades without ever cleaning brass. Never had a problem.
A while back I picked up a wet tumbler. I confess I do like the look of shiny, fresh ammo. But as far as I'm concerned it's purely cosmetic.
The last thing I'd want a potential new reloader to think is that a brass cleaning system is a requirement for handloading. It's not.
|
The Following 3 Users Like Post:
|
|
05-03-2018, 01:43 PM
|
Member
|
|
|
Join Date: Oct 2014
Posts: 159
Likes: 16
Liked 131 Times in 60 Posts
|
|
After tumbling with ss pins and after drying, I run my cases theu corn cob with nu finish polish; it keeps them from tarnishing and sticking in the dies
|
The Following 2 Users Like Post:
|
|
05-03-2018, 02:39 PM
|
Member
|
|
|
Join Date: Jun 2013
Location: Northern KY / Cincinnati
Posts: 9
Likes: 4
Liked 5 Times in 3 Posts
|
|
I've only reloaded Shotshell to date... haven't even purchased a reloader for pistol/rifle yet but I have started to clean my brass. It's mostly what I've been able to save the last few years from myself and friends. This is good information for me. So thank you. I've been depriming my brass and using an RCBS UltraSonic II Cleaner with their case cleaner solution. I got a good deal on it on eBay and figured my brass has been sitting around for a few years so why not. Hopefully by the time I decide on a reloader all my brass will be cleaned...
|
The Following 2 Users Like Post:
|
|
05-03-2018, 03:00 PM
|
|
Member
|
|
|
Join Date: May 2012
Location: S. Orygun
Posts: 2,462
Likes: 1,968
Liked 1,829 Times in 988 Posts
|
|
Cleaning brass is prolly the most talked about part of reloading and the least important. Ninety-eight percent of brass cleaning is just cosmetic, and new reloaders are lead to believe it's an essential part of reloading, it ain't. It is just a personal preference. I'm not anti-tumbling, but I do object to new reloaders being told tumbling is a necessary part of reloading and they needs to spend $$$ just to get started.
FWIW I reloaded for 12 years without tumbling any brass (this was pre-web so I didn't know I had to tumble). Since case inspection is an essential part of reloading and usually done first, I just wiped my brass with a solvent dampened rag as I inspected it. In those 12 years I did not ruin, scratch, gunk up any dies, and my handloads were as good/safe/accurate as any.
I've got a story of some reloaders I watched at a range back when, whose reloads were brown and their groups very small...
Last edited by mikld; 05-03-2018 at 03:01 PM.
|
The Following 7 Users Like Post:
|
|
05-03-2018, 04:12 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: South Oregon Coast
Posts: 1,831
Likes: 89
Liked 1,664 Times in 591 Posts
|
|
The biggest advantage I have found in running brass through a tumbler (actually one of the vibrating tumblers from Cabelas) is that it seems to run more smoothly through my dies. For what it's worth, if you do decide to get a tumbler, I've been really happy with my Cabelas tumbler. I have been using it for years with zero issues. I don't know how many times I've accidentally let it run overnight with no problems. I let it run once from Friday afternoon until Sunday night when I got home and it seemed perfectly happy to keep doing it. They're less than $70 and come with everything you'll really need to get started. As everyone has said though, it's not necessary.
|
The Following 3 Users Like Post:
|
|
05-03-2018, 04:20 PM
|
|
US Veteran
|
|
|
Join Date: Apr 2018
Location: Cecil County, MD
Posts: 301
Likes: 220
Liked 246 Times in 122 Posts
|
|
Started using a Lyman 1200 in the mid 80's when I started reloading and have always cleaned after every use. I use a universal deprimer then into the tumbler.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 04:33 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Dec 2010
Location: Pensacola, Fl
Posts: 4,388
Likes: 9,733
Liked 7,187 Times in 2,603 Posts
|
|
I don't think it is absolutely necessary but I do dry tumble with a mixture of walnut and corn media and nu finish car polish. I do it for a couple of reasons, clean brass is easier for my old eyes to find damaged pieces and it does seem to be less stress on the dies. That and it only takes 30 seconds of my time to put the brass in the tumbler plug it in and walk away. I doubt they shoot any better though.
|
The Following 8 Users Like Post:
|
|
05-03-2018, 04:40 PM
|
Member
|
|
|
Join Date: May 2016
Location: 30min SE Montreal
Posts: 2,026
Likes: 150
Liked 1,540 Times in 841 Posts
|
|
I tumble after each firing.I use the same procedure as Joeintexas.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 04:45 PM
|
|
Member
|
|
|
Join Date: Mar 2006
Location: Colorado
Posts: 15,155
Likes: 91,968
Liked 26,451 Times in 8,432 Posts
|
|
I clean them before reloading in my old Lyman tumbler.A bucket of water with some barkeepers friend works almost as good,just rinse with clean water a few times after sloshing em around.
Edited to add: If you're shooting semi autos shiny brass is easier to see in the weeds and dirt
Last edited by arjay; 05-03-2018 at 05:50 PM.
|
The Following 3 Users Like Post:
|
|
05-03-2018, 05:31 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2008
Location: Colorado
Posts: 7,529
Likes: 19,314
Liked 32,398 Times in 5,484 Posts
|
|
I always clean primer pockets to assure proper seating of new primers (Dremel tool with wire brush). I seldom worry about cleaning my own brass, but I do clean range brass or other fired brass that finds its way to me.
Hot water and dish soap in a plastic bucket is a good first step, 4 or 5 hours soaking followed by two rinses to carry off the soap and other residue. Spread them out on newspaper in a sunny area for a few hours and they are cleaned and dry, ready to process.
I have a vibratory tumbler with walnut shell media, but I seldom use it. Last time I recall loading it up was a batch of .30 Carbine brass with some pretty heavy surface oxidation and tarnish. After 8 hours in crushed walnut shells it all looked like new, but did require routine decapping and primer pocket cleaning to remove excess media.
Basically, I stopped worrying about reloads with cases that weren't looking factory-fresh and shiny along about the time Jimmy Carter was doing his best to destroy the American economy. I don't really care if my reloads show a bit of tarnish or a lack of shine, as long as they function properly I'm a happy guy.
|
The Following 3 Users Like Post:
|
|
05-03-2018, 05:44 PM
|
Member
|
|
|
Join Date: Sep 2016
Location: North Texas
Posts: 804
Likes: 86
Liked 482 Times in 300 Posts
|
|
Quote:
Shark Bait asked:
How often should casings be cleaned prior to reloading?
|
Cases should be cleaned at least once to remove dirt and debris that could damage dies and other reloading equipment.
Quote:
Is this a step that should always be taken or is it more for clean looking reloads?
|
Please note that "cleaning" is distinct from tumbling or polishing the cases. Tumbling or polishing brass cases is primarily done for cosmetic purposes - although polished brass is arguably easier to visually inspect - and is NOT required.
But you can see the number of posts so far that have taken your question about cleaning and turned it into a referendum on tumbling and/or polishing. Tumbling and polishing is the least important part of reloading yet it seems to generate the greatest amount of discussion.
There's nothing wrong with wanting brass that is not only clean but also shiny - even shiny as a mirror. But, it would be a mistake to think that there's any correlation between how shiny brass is and the quality of the ammunition assembled with it.
|
The Following 3 Users Like Post:
|
|
05-03-2018, 05:48 PM
|
|
Member
|
|
|
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,639 Times in 1,628 Posts
|
|
Agree with mikld. It's mostly cosmetic.
But cosmetic is good. Who wants to shoot ugly ammo?
__________________
I've still got it made.
|
The Following 5 Users Like Post:
|
|
05-03-2018, 06:19 PM
|
|
Member
|
|
|
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 31,020
Likes: 41,700
Liked 29,274 Times in 13,842 Posts
|
|
It's also a motivator.....
Quote:
Originally Posted by Ivan the Butcher
Personally, I like the super shiny brass, It is easier to find on the ground!
Ivan
|
It's also a motivation to pick up your brass!!!
I used to wash my brass in hot soapy water, but tumbling is not any harder. Maybe less so.
__________________
"He was kinda funny lookin'"
|
The Following 3 Users Like Post:
|
|
05-03-2018, 07:00 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by rwsmith
It's also a motivation to pick up your brass!!!
I used to wash my brass in hot soapy water, but tumbling is not any harder. Maybe less so.
|
Way less. Dump into tumbler, turn it on, dump them in a separator, done. The reason I do not wet clean is the time suck of it & extra steps. To do it right, they need to be deprimed, extra step. Then they must be dried 100%, more time & handling. Then they are so clean as to cause add'l force to reload, UNLESS you dry tumble with media & polish after? So why not just dry tumble to start? Just me, dry tumble has been working fine for about 37y. Before that I just rolled them in a damp towel & loaded them up. Which still works btw, especially if you use Lemishine in the water to dampen the towel.
__________________
NRA Cert. Inst. IDPA CSO
Last edited by fredj338; 05-03-2018 at 07:02 PM.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 07:11 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Florida
Posts: 6,652
Likes: 3,424
Liked 9,330 Times in 3,506 Posts
|
|
Quote:
Originally Posted by hdwhit
Cases should be cleaned at least once to remove dirt and debris that could damage dies and other reloading equipment.
Please note that "cleaning" is distinct from tumbling or polishing the cases. Tumbling or polishing brass cases is primarily done for cosmetic purposes - although polished brass is arguably easier to visually inspect - and is NOT required.
But you can see the number of posts so far that have taken your question about cleaning and turned it into a referendum on tumbling and/or polishing. Tumbling and polishing is the least important part of reloading yet it seems to generate the greatest amount of discussion.
There's nothing wrong with wanting brass that is not only clean but also shiny - even shiny as a mirror. But, it would be a mistake to think that there's any correlation between how shiny brass is and the quality of the ammunition assembled with it.
|
You do realize one can tumble cases to clean them without polishing them, don't you? I never polish my cases, but I do tumble them clean.
|
The Following 5 Users Like Post:
|
|
05-03-2018, 07:31 PM
|
Banned
|
|
|
Join Date: Jun 2016
Location: USA
Posts: 1,285
Likes: 1,112
Liked 1,609 Times in 660 Posts
|
|
I clean all my cases in my Frankford arsenal tumbler before reloading. A cleaned case allows for better inspection & weeding out any cracked cases or any other defect that may not be noticed if the case wasn't cleaned. It does allow for a nicer appearing product in the end and arguably a cleaned case will chamber easier and lessen the chances of fouling the chamber.
|
The Following 2 Users Like Post:
|
|
05-03-2018, 07:53 PM
|
Member
|
|
|
Join Date: Mar 2015
Posts: 3,183
Likes: 9,014
Liked 9,908 Times in 2,006 Posts
|
|
I appreciate all the responses and helpful info. I reloaded many years ago and never bothered with cleaning beyond a wipe down. I'm getting back into reloading now and I know you guys are a great resource. Thank you for the input.
|
The Following User Likes This Post:
|
|
05-03-2018, 07:56 PM
|
Member
|
|
|
Join Date: Oct 2009
Posts: 3,264
Likes: 22
Liked 5,585 Times in 1,957 Posts
|
|
I started reloading in 1968. Not one case was ever cleaned until 2016, when i retired. Now that I have extra time I thought I should make the cases pretty.
I am using the same dies since 1968, so I guess I haven't hurt them yet.
I DO clean primer pockets each time.
|
The Following 4 Users Like Post:
|
|
05-03-2018, 08:12 PM
|
|
Member
|
|
|
Join Date: Oct 2017
Location: Kenora, Canada
Posts: 320
Likes: 68
Liked 119 Times in 73 Posts
|
|
Clean brass looks nice. A bucket with warm water and citric acid works for me. Don't leave it sit too long is all. Put the wet brass in a dehydrator and Bob's your uncle. Good stuff guys.
|
The Following User Likes This Post:
|
|
05-03-2018, 09:31 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,292
Likes: 8,820
Liked 7,786 Times in 2,377 Posts
|
|
Decap first, then wet pin tumbling.
Every loading.
Do it right every time.
__________________
-jwk-
US Army '72-'95
|
The Following 2 Users Like Post:
|
|
05-04-2018, 07:55 AM
|
Member
|
|
|
Join Date: Apr 2007
Location: Virginia
Posts: 8,796
Likes: 19,632
Liked 11,910 Times in 5,408 Posts
|
|
I mostly reload straight wall handgun cartridges. I dump mine in my Lyman Turbo Tumbler (actually, it is a vibrating case cleaner) loaded with crushed corncob and a little of Lyman's brass polishing liquid. Vibrate them until they are shiny, then remove them. I de-prime after cleaning. I tried de-priming, then tumbling, but the corncob had a tendency to pack into the primer pockets.
I've been doing it this way for three decades, no issues.
|
The Following 3 Users Like Post:
|
|
05-04-2018, 08:07 AM
|
Member
|
|
|
Join Date: Jul 2012
Posts: 807
Likes: 127
Liked 798 Times in 250 Posts
|
|
I like the look of dirty brass when using lead bullets. Give's it a vintage ammo look. *shrugs*
If I'm using plated or fmj I like the look of shiny bullets.
|
The Following 2 Users Like Post:
|
|
05-04-2018, 08:13 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
I vibrate mine for a couple of hours now before I load them but when I started years ago, I would just wipe them off. You do not need to be too anal about it and the stainless pin stuff gets them too clean and they stick on expanders too much.
|
The Following 2 Users Like Post:
|
|
05-04-2018, 10:58 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,094
Likes: 10,804
Liked 15,528 Times in 6,806 Posts
|
|
I hand polish each case with a small piece of microfiber cloth , a Q tip and Flitz. Then sterilize them in a hospital grade autoclave
__________________
Still Running Against the Wind
|
The Following 7 Users Like Post:
|
|
05-04-2018, 12:58 PM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,600
Likes: 2,289
Liked 3,516 Times in 1,495 Posts
|
|
Quote:
Originally Posted by Rule3
I hand polish each case with a small piece of microfiber cloth , a Q tip and Flitz. Then sterilize them in a hospital grade autoclave
|
I thought I was the only one to do this. It does take a while to learn to use tweezers on the cases after they are sterilized. I use rubber gloves when loading magazines, cylinders, etc. on the range, as well as, surgical masks, caps and robes. I never use the clothing more than once.
Last edited by BE Mike; 05-04-2018 at 01:00 PM.
|
The Following 4 Users Like Post:
|
|
05-04-2018, 01:06 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,261
Likes: 9,424
Liked 8,924 Times in 2,577 Posts
|
|
Well, now I'm grinning - thanks, gents, I needed that.
__________________
Now go make God proud...
|
The Following 3 Users Like Post:
|
|
05-04-2018, 01:39 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,094
Likes: 10,804
Liked 15,528 Times in 6,806 Posts
|
|
The only topic with more posts(any forum) than "cleaning brass" is what is the best Progressive Press"
__________________
Still Running Against the Wind
|
The Following User Likes This Post:
|
|
05-04-2018, 01:46 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,292
Likes: 8,820
Liked 7,786 Times in 2,377 Posts
|
|
Or, the dreaded oil thread..
__________________
-jwk-
US Army '72-'95
|
The Following 2 Users Like Post:
|
|
05-04-2018, 02:15 PM
|
|
Member
|
|
|
Join Date: Jan 2018
Location: So. Illinois
Posts: 2,623
Likes: 1,403
Liked 3,350 Times in 1,442 Posts
|
|
I deep-sixed my tumbler because tumbling generates lead dust and lead dust is a major source of lead ingestion. Usually I'll spray a towel with 409 or whatever, shake the cases around in it, then reload. If I want really clean cases I'll use the old lemon juice, salt, dish soap solution. THAT makes 'em sparkle.
|
The Following User Likes This Post:
|
|
05-04-2018, 02:30 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by GypsmJim
I started reloading in 1968. Not one case was ever cleaned until 2016, when i retired. Now that I have extra time I thought I should make the cases pretty.
I am using the same dies since 1968, so I guess I haven't hurt them yet.
I DO clean primer pockets each time.
|
This part I do NOT understand. In 40y of reloading, I have never cleaned a service pistol primer pocket, never. Over 300K rds loaded & fired, never a misfire from a dirty primer pocket. I still clean the pockets on precision rifle out of habit. Everything gets checked & over done for precision rifle.
__________________
NRA Cert. Inst. IDPA CSO
|
The Following User Likes This Post:
|
|
05-04-2018, 02:33 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by dogdoc
I vibrate mine for a couple of hours now before I load them but when I started years ago, I would just wipe them off. You do not need to be too anal about it and the stainless pin stuff gets them too clean and they stick on expanders too much.
|
My buddy is a machinist, custom grinding/polishing. He was asking me why his PTX/powder thru expander sticks so much. I told him he has got to stop wet/ss cleaning & it will go away. He doubted me & polished his funnels mirror bright, still sticks. So now he tumbles after in cob & polish to make them a little slicker?
__________________
NRA Cert. Inst. IDPA CSO
|
05-04-2018, 02:42 PM
|
Banned
|
|
|
Join Date: Nov 2012
Location: Gods waiting room, W/C FL
Posts: 3,736
Likes: 3,334
Liked 4,549 Times in 2,011 Posts
|
|
DITTO
Quote:
Originally Posted by LoboGunLeather
I always clean primer pockets to assure proper seating of new primers (Dremel tool with wire brush). I seldom worry about cleaning my own brass, but I do clean range brass or other fired brass that finds its way to me.
Hot water and dish soap in a plastic bucket is a good first step, 4 or 5 hours soaking followed by two rinses to carry off the soap and other residue. Spread them out on newspaper in a sunny area for a few hours and they are cleaned and dry, ready to process.
I have a vibratory tumbler with walnut shell media, but I seldom use it. Last time I recall loading it up was a batch of .30 Carbine brass with some pretty heavy surface oxidation and tarnish. After 8 hours in crushed walnut shells it all looked like new, but did require routine decapping and primer pocket cleaning to remove excess media.
Basically, I stopped worrying about reloads with cases that weren't looking factory-fresh and shiny along about the time Jimmy Carter was doing his best to destroy the American economy. I don't really care if my reloads show a bit of tarnish or a lack of shine, as long as they function properly I'm a happy guy.
|
2 vibratory tumblers gathering dust in the garage. Boiling soap/water/vinegar/pinch of salt, then oven dry <250 degrees, let cool & a SMALL spritz of Hornady one shot (while still hot) & mix well. IS IT REALLY NEEDED??? IDK, but haven't had a stuck case since using this method. The eyes can lie if you only give them a quick look see. Don't want a bit of media in the flash hole, sand, or a spider web in the case. The inside & primer pocket is more important than the outside, to me, as long as they are not sticky, TEHO. A BIG +1 for the dremel & wire brush.
|
05-04-2018, 07:25 PM
|
Member
|
|
|
Join Date: Oct 2009
Posts: 3,264
Likes: 22
Liked 5,585 Times in 1,957 Posts
|
|
Quote:
Originally Posted by fredj338
This part I do NOT understand. In 40y of reloading, I have never cleaned a service pistol primer pocket, never. Over 300K rds loaded & fired, never a misfire from a dirty primer pocket. I still clean the pockets on precision rifle out of habit. Everything gets checked & over done for precision rifle.
|
When I started reloading (as a teenager) I went to the libary (remember those) and borrowed a how-to book. It said to clean primer pockets. As a novice I thought it was necessary, and i just continued the practice.
|
05-05-2018, 07:19 AM
|
Member
|
|
|
Join Date: Apr 2007
Location: Virginia
Posts: 8,796
Likes: 19,632
Liked 11,910 Times in 5,408 Posts
|
|
For precision ammo, especially rifles, clean and uniformed primer pockets and uniform flash holes. I tried this one with 45 ACP and found it was a waste of time. So for precision rifle, yes, for pistols and blasting ammo, I would not bother the primer pockets other than to remove any crimp.
|
The Following User Likes This Post:
|
|
|
|
Posting Rules
|
|
|
|
|