|
|
05-15-2024, 12:52 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
K22 stainless question
Hello everyone! I’m new to the group and I was hoping someone could help me with a question. I recently purchased a K22 (5 screw) with 6” barrel. The revolver I purchased is finished in a brushed stainless steel. Everything I am seeing talks about blued revolvers. Did S/W make the K22 in brushed stainless? Serial number is (K 42122). This number appears under the barrel, on the cylinder near where the bullets are loaded, and at the bottom of the handle. I thank you in advance for your time!
Sam
***UPDATED***
Serial Number added
Anyone know the production year based on serial number now that I added it (I apologize for not sharing initially). Lesson learned for future posts.
Last edited by Samuel2223; 05-15-2024 at 03:09 PM.
|
The Following 13 Users Like Post:
|
boykinlp, cmansguns, CWH44300, Dino44, Hunter Keith, JD3006, LPD256, lscocoa, Muley Gil, quinn, series guy, Wiregrassguy, woodsltc |
05-15-2024, 12:56 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
That's either hard chrome or electroless nickel...Welcome to the forum...Why do you not want the serial number known?... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following 9 Users Like Post:
|
|
05-15-2024, 02:12 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,008
Likes: 5,170
Liked 19,399 Times in 6,961 Posts
|
|
Hi Samuel2223 and welcome to the S&W Forum.
Since it has five screws, proud pins on the front sight and the serial number on the cylinder, your K-22 Masterpiece was made before about mid-year 1956. If you must blank out digits in the serial number (no real need to do that), you should eliminate the last one or two, not the first digits. To approximate the date, we need at least the first two or three after the K. We also need to know the total number of numeric digits.
As for stainless, it is not possible for this K-22 to be made of stainless steel. S&W did not make any stainless revolvers until 1965. Neither did anyone else.
Added: I just noticed that you wrote you only eliminated one digit. If so, this is a very early K-22 Masterpiece, probably from 1947. It also appears to have the narrow rib, which is consistent with a 1947 unit.
__________________
Jack
SWCA #2475, SWHF #318
Last edited by JP@AK; 05-15-2024 at 02:17 PM.
|
The Following 3 Users Like Post:
|
|
05-15-2024, 03:02 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
I added the full serial number. K42122
It does have the narrow front rib.
So, if S/W did not make any stainless during this time period, is this a nickel finish? Or was the blue removed and refinished in another way.
|
05-15-2024, 03:06 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
Quote:
Originally Posted by Samuel2223
I added the full serial number. K42122
|
Ahh, much better...Thanks...The Standard Catalog suggests a manufacture date of sometime in 1948...Others may have some shipping dates for close numbers, but bear in mind S&W did not ship in serially numerical order... ...Ben
__________________
Cogito, ergo BOOM!...
|
05-15-2024, 03:13 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,008
Likes: 5,170
Liked 19,399 Times in 6,961 Posts
|
|
At K42122, it most likely shipped in 1948. I show one just a wee bit higher that shipped in August of that year.
Quote:
if S/W did not make any stainless during this time period, is this a nickel finish? Or was the blue removed and refinished in another way.
|
The K-22 Masterpiece was available only with a blue finish. What you have is an aftermarket change. Yes, most likely they removed the blue first. It is either nickel plate or some sort of hard chrome.
__________________
Jack
SWCA #2475, SWHF #318
|
The Following 2 Users Like Post:
|
|
05-15-2024, 03:59 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
Thanks for the information. Does the fact that the finish was altered ruin the value in terms of adding to a collection? I intend to enjoy shooting this gun as long as I am able and then pass it along to one of my boys someday. But I was curious if the value has been negatively affected since the finish is not blue.
Thanks again for all of the information.
|
The Following 4 Users Like Post:
|
|
05-15-2024, 04:49 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,008
Likes: 5,170
Liked 19,399 Times in 6,961 Posts
|
|
Any aftermarket alteration, including a refinish, eliminates the collector premium on an otherwise collectible S&W revolver. So, yes, your K-22 would no longer fit into the collector niche and it would not rate a collector's premium.
That said, the refinish does no harm to the functionality. You still have a fine "shooting iron." By all means, enjoy shooting it and handing it down to your progeny some day.
__________________
Jack
SWCA #2475, SWHF #318
|
The Following 8 Users Like Post:
|
|
05-15-2024, 06:24 PM
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Dallas-Fort Worth
Posts: 4,302
Likes: 8,303
Liked 12,542 Times in 2,858 Posts
|
|
Looks like hard chrome to me which is one of the best finishes in terms of durability although, as far as I know, S&W has never used it. A great choice for a gun that is going to be used, especially one that is going to spend a lot of time in a holster. That finish is hard to tell from a brushed nickel or even stainless. One tell is that in refinishing the sights and hammer and trigger were often included while the factory would use color case hardened triggers/hammers and the sights were usually black even on nickel finished guns.
This 25-5 is in hard chrome and one of my favorites that I can use and not worry about wear. Enjoy yours.
Jeff
SWCA #1457
Last edited by 22hipower; 05-15-2024 at 07:55 PM.
|
The Following 15 Users Like Post:
|
19leben, Baxter6551, boykinlp, cmansguns, CWH44300, Dino44, Frieda's Boss, LPD256, lscocoa, Muley Gil, OutWest50, RKmesa, Samuel2223, series guy, Wiregrassguy |
05-15-2024, 06:46 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
Quote:
Originally Posted by 22hipower
Looks like hard chrome to me which is one of the best finishes in terms of durability
|
Indeed...It's an industrial finish designed to resist wear...For a functionally sound gun with no future in a purist type of collection, it's an excellent choice... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following User Likes This Post:
|
|
05-15-2024, 06:59 PM
|
Member
|
|
|
Join Date: Dec 2018
Location: East Tennessee
Posts: 1,459
Likes: 1,469
Liked 3,416 Times in 936 Posts
|
|
The 1911 is brushed hard chrome and has seen some heavy use in USPSA competition. It’s been covered in dust and dirt and in and out of a holster a few thousand times and the finish is still perfect.
The M15 is Electroless nickel and like the 1911 has been in the dirt and dirt and thousands of draws from a leather holster and the finish is still perfect. Both are about 30 years old or more.
|
The Following 12 Users Like Post:
|
22hipower, arjay, Baxter6551, cmansguns, CWH44300, Dino44, Hunter Keith, kraynky, lscocoa, RKmesa, Samuel2223, Wiregrassguy |
05-15-2024, 07:29 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,401
Likes: 3,072
Liked 14,521 Times in 5,525 Posts
|
|
To be sure of the metal that was used, grab a magnet. If it sticks, it is almost certain it is steel. That K22 was definitely manufactured in 1948 and as noted above, likely shipped that same year. Manufacture of K frame Masterpiece revolvers made in 1948 ran from K18732 to K73121.
__________________
Gary
SWCA 2515
|
The Following 2 Users Like Post:
|
|
05-15-2024, 07:40 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
Thank you to everyone who shared information. I have a more clear picture of my new beautiful 22 revolver. I have one more question and it’s a little odd I guess but anyone know value wise what this revolver is worth just for my own knowledge. Paid 700 and I was happy at that price because I’ve been looking for one for quite some time and it’s a nice match for my Model 19–3 that’s pictured with it. I’m hoping I did not overpay too much but nowadays it’s getting harder to find a nice representation of these older revolvers.
|
The Following User Likes This Post:
|
|
05-15-2024, 08:54 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
Quote:
Originally Posted by Samuel2223
I have one more question and it’s a little odd I guess but anyone know value wise what this revolver is worth just for my own knowledge.
|
Value is a subjective thing...If you like it, then it's worth every penny you paid, and more...When you decide it no longer has a place with you, then it's worth what its next caretaker is willing to pay...Those who are used to seeing my guns at shows know that I value each of mine highly for fear I'll lose them to some high roller...But those who know me at all also know that becoming caretaker to one of my treasures can be done with a little finesse...Don't ever feel you paid too much, although it's possible you may have bought it too soon... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following 3 Users Like Post:
|
|
05-15-2024, 11:14 PM
|
|
SWCA Member
|
|
|
Join Date: Oct 2006
Location: AZ
Posts: 6,969
Likes: 28,211
Liked 46,160 Times in 4,873 Posts
|
|
Quote:
Originally Posted by Samuel2223
|
First: It certainly looks like brushed stainless - but as noted above, we know that it is not. It has lost its collector value, BUT I LIKE IT! When you tire of it - let me know, as I do not have one like it in my rather extensive K-22 collection. And I like modified S&Ws.
Second: WELCOME TO THE FORUM!!! This is a great place to hang out and discuss all things S&W. Lots of great info and great guns posted here.
Third: Supporting an estimated ship date sometime in the Fall 1948, is K55062 (the closest K-22 SN in my collection) that shipped in November 1948.
Forth: I for one would love to see some more photos of that gun. The finish looks to be well done and evenly applied.
Thanks for sharing,
__________________
Richard
Engraved S&W fan
Last edited by RKmesa; 05-15-2024 at 11:16 PM.
|
The Following 4 Users Like Post:
|
|
05-15-2024, 11:16 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2008
Location: South Carolina
Posts: 7,321
Likes: 19,415
Liked 11,420 Times in 3,386 Posts
|
|
Nice gun, Samuel. A couple of things that I like about it compared to a later one is the sharp shoulder diamond Magna grips, and single line address. More classy than the later non-diamond version.
Larry
__________________
Miss Buddies crsides & fat tom
|
The Following 2 Users Like Post:
|
|
05-16-2024, 02:29 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2012
Location: Eastern WA
Posts: 3,324
Likes: 1,780
Liked 7,425 Times in 1,928 Posts
|
|
It's a common misconception. Stainless steel isn't technically a finish, it's a material. One can no more refinish a blued carbon steel gun as stainless than one can refinish an apple as an orange. But I agree that it's probably chrome. I have my own, somewhat smaller, S&W .22 refinished this same way.
__________________
Psalm 27:2
|
The Following 11 Users Like Post:
|
.38SuperMan, boykinlp, cmansguns, CWH44300, Dino44, ken158, lscocoa, Muley Gil, RKmesa, Samuel2223, Wiregrassguy |
05-16-2024, 07:50 AM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: North Chesterfield, Va.
Posts: 6,356
Likes: 9,067
Liked 13,582 Times in 3,347 Posts
|
|
I've got a K-22 from 1951, that was tagged at the LGS at $700, right at the end of last year. I was surprised, I figured it would be higher. I begged, whined and looked pitiful enough that they knocked of $50.00 to shut me up, so I'd say your price was in the ballpark.
Your original finish would have no doubt looked a bit like this.
In the post war years Smith and Wesson used a more matte finish to speed up production to catch up with backorders from the war years. As production caught up, they went back to the bright blue we think of when we hear "blue gun."
__________________
John 3:16 .
|
The Following 8 Users Like Post:
|
|
05-16-2024, 07:59 AM
|
|
Moderator
|
|
|
Join Date: Jun 2007
Posts: 26,292
Likes: 1,099
Liked 19,365 Times in 9,446 Posts
|
|
It's a cool gun, and if it has a hard chrome finish the exterior metal is more or less rust proof, so a perfect rainy day gun.
On a different topic, my understanding is S & W (and most other) stainless steel guns will attract a magnet, so that is not a reliable way to tell these from a hard chrome or electroless nickel plated gun. Enjoy!
__________________
Alan
SWCA LM 2023, SWHF 220
|
The Following 3 Users Like Post:
|
|
05-16-2024, 08:39 AM
|
|
US Veteran
|
|
|
Join Date: Mar 2016
Location: Hanover, Virginia
Posts: 1,855
Likes: 3,354
Liked 5,835 Times in 1,436 Posts
|
|
Probably 1948 but some things to check to be sure
Welcome to the Forum OP! I believe you got a nice deal on a nice gun. Some items I've noticed and been educated about by the experts on this forum over the years that may be of interest to you about your K22 Masterpiece.
Last year I sold a 3 digit, K22, blue (K 905) that shipped in August of 1947. This date was confirmed by a Factory Letter of Authentication. It had what is known as a "one line address" on the right side of the frame.
Also last year I sold my other K22 Masterpiece, blue finish, serial number K 42372. This may be the gun that Jack (JP@AK) is referring to in his post above as it is a little higher than yours and mine was confirmed by S&W Historian as shipping in August 1948.
The 1948 gun pics below show that it had a 4 line address, high speed (aka short) action, large S&W logo on right side of frame.
These same features should be present on your gun if unaltered from original. I see one poster above spoke about yours's having a 1 line address but I cannot see that from the photos.
If you could post some more pics it would be great as we LOVE photos on this Forum!
I think you did just fine at $700. When I sold the 2 I had last year, they both went to the same collector and price realized (after shipping costs, transfer fees, etc.) was a tad less than $1,000 each.
__________________
Charlie B
SWCA#3083, SWHF#570
|
The Following 4 Users Like Post:
|
|
05-16-2024, 08:47 AM
|
Member
|
|
|
Join Date: Apr 2009
Location: East Central Florida
Posts: 2,023
Likes: 5,075
Liked 4,495 Times in 1,270 Posts
|
|
Hello Sam, and welcome to the Forum! I guess you got your answer- your K22 Masterpiece was definitely refinished. It would have originally looked like mine (K40403, also 1948) and have been shipped in a gold box. Mine shows some honest wear, but it's an accurate shooter and a lot of fun. It also has a hair trigger so I assume it was worked on by a previous owner. Regardless of the refinish, you and your family will like taking your K22 to the range. It's a great training revolver for youngsters and women new to shooting since there is literally no recoil, and ammo is cheap. Enjoy!
|
The Following 5 Users Like Post:
|
|
05-16-2024, 09:16 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,401
Likes: 3,072
Liked 14,521 Times in 5,525 Posts
|
|
Quote:
Originally Posted by Samuel2223
. . . I have one more question and it’s a little odd I guess but anyone know value wise what this revolver is worth just for my own knowledge. Paid 700 and I was happy . . .
|
Yes, $700 is too high for that gun. Remember that percent finish is the major factor in valuing any firearm and your revolver has 0% original finish. Worn K22 Masterpiece revolvers can be purchased for $500 and still function like new, plus will have more original finish than yours.
Outside of the collector market, it is hard to determine a value since demand will be relatively low. The K22 is one of the finest handguns S&W ever manufactured and the Masterpiece line is considered as the about best model ever made by the company. You now own the revolver and it's time to enjoy shooting it without much worry about wearing the finish.
My birthyear gun shipped in 1948.
__________________
Gary
SWCA 2515
Last edited by glowe; 05-16-2024 at 09:21 AM.
|
The Following 6 Users Like Post:
|
|
05-16-2024, 10:02 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 18,013
Likes: 8,001
Liked 26,335 Times in 8,849 Posts
|
|
Quote:
Originally Posted by Truckman
That's either hard chrome or electroless nickel...Welcome to the forum...Why do you not want the serial number known?... ...Ben
|
With all the hacking, scamming and deceptiveness going on these days (especially online), I think it is quite prudent to leave off the last 2 digits of the serial number. There is just no practical reason to give that info out!! Unless you are dating a very valuable gun, selling a specific famous historical gun, or trying to prove a gun belonged to a specific person during a certain time period, the last two digits won't usually mean squat - unless you are looking to pin the date down to a specific day. There is nothing at all wrong with using a serial number style like this example: 8K2644 XX. Close enough for our general purposes and not specific enough for a scam job.
Bottom line is IMHO, there is just no reason for the last 2 digits to be disclosed - and it makes me sleep better at night. Just my 2 cents.
|
The Following 5 Users Like Post:
|
|
05-16-2024, 10:35 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
Quote:
Originally Posted by chief38
There is nothing at all wrong with using a serial number style like this example: 8K2644XX. Close enough for our general purposes and not specific enough for a scam job.
Bottom line is IMHO, there is just no reason for the last 2 digits to be disclosed - and it makes me sleep better at night. Just my 2 cents.
|
It's OK with me if others want to do that...I see no point to it, and nothing to fear from real numbers...I also know we have several members here who are tracking particular guns for databases which can benefit us all...If my use of real numbers from my guns helps them, I'm glad to be of service...But to each his/her own... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following 2 Users Like Post:
|
|
05-16-2024, 11:37 AM
|
SWCA Member
|
|
|
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 5,655
Likes: 963
Liked 10,198 Times in 3,754 Posts
|
|
VALUES--------------
Here are the prices fetched by the K-22's from my collection which was liquidated over the three years ending a year ago. Perhaps needless to say, these were original finish, high condition guns; and any comparison of these to this gun is akin to comparing apples to oranges----does not compute.
K-22 1st Model (with King Cockeyed Hammer)------$2500
K-22 1st Model-----------------------------------------$1750
K-22 2nd Model (Given/shipped to Philip B. Sharpe) $9500
K-22 3rd Model (Narrow Rib/One Line Address)------$1530
K-22 3rd Model (Narrow Rib/ Four Line Address)-----$1175
K-22 4th Model (Wide Rib)-----------------------------$950
Ralph Tremaine
Edited to add: I said "original finish", not so as re the 4th Model. This started life as a "Satin Blue" (the funky finish) gun which came to make my teeth hurt----was the first K-22 (also first/only handgun bought new (in 1956))---and given the ill effect on my teeth, and the fact I didn't know any better, I had it refinished by the factory in 1960----in Bright Blue---a VAST improvement!!
Last edited by rct269; 05-16-2024 at 11:59 AM.
|
The Following User Likes This Post:
|
|
05-16-2024, 12:20 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,401
Likes: 3,072
Liked 14,521 Times in 5,525 Posts
|
|
Quote:
Originally Posted by murphydog
. . . On a different topic, my understanding is S & W (and most other) stainless steel guns will attract a magnet, so that is not a reliable way to tell these from a hard chrome or electroless nickel plated gun. Enjoy!
|
All stainless steel has iron in it, which is the magnetic element in the alloy. The magnetic attraction to stainless is very weak compared to a very strong attraction with steel. It is easy to tell the difference between SS and steel.
__________________
Gary
SWCA 2515
|
The Following User Likes This Post:
|
|
05-16-2024, 11:17 PM
|
SWCA Member
|
|
|
Join Date: Apr 2021
Location: Memphis, TN
Posts: 131
Likes: 261
Liked 354 Times in 74 Posts
|
|
Sam,
Thank you for sharing your new acquisition with the forum. I for one really like it and do not see the hard chrome refinish as a negative, just the opposite. To me it is worth every bit what you paid for it.
Regards,
Chaz
__________________
SWCA #3929, SWHF #1010
|
The Following User Likes This Post:
|
|
05-17-2024, 09:29 AM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: Arkansas
Posts: 3,358
Likes: 15,080
Liked 10,840 Times in 2,014 Posts
|
|
There is a K22 floating around that ,in a moment of poor decision making ,I let slip away. It wears an Armoloy coating and yes that destroys collectibility but makes for a very nice revolver that got heavy use.
__________________
LEX ET ORDO
|
The Following 3 Users Like Post:
|
|
05-17-2024, 09:51 AM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
Quote:
Originally Posted by cmansguns
Welcome to the Forum OP! I believe you got a nice deal on a nice gun. Some items I've noticed and been educated about by the experts on this forum over the years that may be of interest to you about your K22 Masterpiece.
Last year I sold a 3 digit, K22, blue (K 905) that shipped in August of 1947. This date was confirmed by a Factory Letter of Authentication. It had what is known as a "one line address" on the right side of the frame.
Also last year I sold my other K22 Masterpiece, blue finish, serial number K 42372. This may be the gun that Jack (JP@AK) is referring to in his post above as it is a little higher than yours and mine was confirmed by S&W Historian as shipping in August 1948.
The 1948 gun pics below show that it had a 4 line address, high speed (aka short) action, large S&W logo on right side of frame.
These same features should be present on your gun if unaltered from original. I see one poster above spoke about yours's having a 1 line address but I cannot see that from the photos.
If you could post some more pics it would be great as we LOVE photos on this Forum!
I think you did just fine at $700. When I sold the 2 I had last year, they both went to the same collector and price realized (after shipping costs, transfer fees, etc.) was a tad less than $1,000 each.
|
Thanks for all of this information! I will post some more pics this evening when I get home. I believe (from what I remember) there are 4 lines in the address, but I will confirm when I get home. The finish was done really well by whoever completed that project. The revolver has a nice even finish and texture.
|
05-17-2024, 10:10 AM
|
|
SWCA Member
|
|
|
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 5,298
Likes: 2,917
Liked 3,409 Times in 1,730 Posts
|
|
You might want to check your front sight, too. Some K22s of that era shipped with 1/10 front sight, but most with 1/8 inch front sights. It is also common for K22s to have tight chambers, hence sticky extraction. Maybe the hard chrome will ease that somewhat, if the chambers are coated, as I assume they are.
__________________
Richard Gillespie
FBINA 102
|
05-17-2024, 10:11 AM
|
US Veteran
|
|
|
Join Date: Mar 2000
Location: Monroeville, Ohio,USA
Posts: 2,745
Likes: 879
Liked 6,378 Times in 1,592 Posts
|
|
Hard Chrome finish
The hard chrome finishes I have seen were slightly different in color when compared to a Factory SS revolver like a 629,686,657, etc., under good LED or fluorescent (Daylight Tint)!
A question for the posters that own, or have owned, a hard chrome finished gun! Where can I get one of these finishes done to a gun today and what is the approx. cost?
jcelect
|
05-17-2024, 10:27 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
Quote:
Originally Posted by jcelect
Where can I get one of these finishes done to a gun today and what is the approx. cost?
jcelect
|
I'm not much help here, Joe...The only gun I ever sent away to be hard chromed was my old Gold Cup...Checkmate Plating in Florida did it, matted the rounds and polished the flats perfectly...unfortunately they are no longer in business and I have been unable to find out where their craftsmen may have gone... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following 4 Users Like Post:
|
|
05-17-2024, 10:42 AM
|
|
Moderator
|
|
|
Join Date: Jun 2007
Posts: 26,292
Likes: 1,099
Liked 19,365 Times in 9,446 Posts
|
|
Quote:
Originally Posted by jcelect
The hard chrome finishes I have seen were slightly different in color when compared to a Factory SS revolver like a 629,686,657, etc., under good LED or fluorescent (Daylight Tint)!
A question for the posters that own, or have owned, a hard chrome finished gun! Where can I get one of these finishes done to a gun today and what is the approx. cost?
jcelect
|
Mahovsky’s Metalife has a good reputation and fair pricing. I’m intending to send one to him for work, just haven’t gotten around to it…
__________________
Alan
SWCA LM 2023, SWHF 220
|
05-17-2024, 09:51 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
Additional pics
Ok I’m adding some more pictures as promised. The white line on the cylinder is a dog hair not a scratch. LOL
|
The Following 8 Users Like Post:
|
|
05-17-2024, 09:54 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
More pictures
A few more pics
|
The Following 7 Users Like Post:
|
|
05-17-2024, 09:57 PM
|
Member
|
|
|
Join Date: May 2024
Posts: 8
Likes: 23
Liked 40 Times in 6 Posts
|
|
Ok last batch of pics
Few more pics
|
The Following 7 Users Like Post:
|
|
05-17-2024, 10:27 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 3,980
Likes: 0
Liked 10,138 Times in 2,883 Posts
|
|
You know now that the Magna grips are definitely original...I think somebody did a nice job with the plating... ...Ben
__________________
Cogito, ergo BOOM!...
|
The Following 5 Users Like Post:
|
|
05-18-2024, 08:24 AM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: Arkansas
Posts: 3,358
Likes: 15,080
Liked 10,840 Times in 2,014 Posts
|
|
Last time I looked Armoloy was still. In business. Don't know if they are still do firearms or current costs.
Metaloy in Berryville, Arkansas was coating firearms. Have not looked them up in a while so don't know their current status.
I do know how pleased with Armoloy's finish that I was. Sure was the perfect Cottonmouth eradicator , back when such activity was not illegal.
__________________
LEX ET ORDO
Last edited by lawandorder; 05-18-2024 at 08:25 AM.
|
The Following 2 Users Like Post:
|
|
05-18-2024, 08:59 AM
|
Member
|
|
|
Join Date: Apr 2007
Location: Virginia
Posts: 8,914
Likes: 20,119
Liked 12,097 Times in 5,487 Posts
|
|
That K-22 is definitely plated and, to me, it looks like NP3 or a similar nickel finish. It also looks like it was very well done. Collector value is gone, but it should make for a fine shooter.
__________________
VCDL, GOA, NRA
|
The Following 2 Users Like Post:
|
|
05-18-2024, 09:14 AM
|
|
US Veteran
|
|
|
Join Date: Mar 2016
Location: Hanover, Virginia
Posts: 1,855
Likes: 3,354
Liked 5,835 Times in 1,436 Posts
|
|
Still a sweet gun IMHO
Thank you Samuel2223 for the additional pics as they really help in pinning your gun down to 1948 at minimum. Some items that show up in your newly added pics:
The right grip panel serial numbered to the gun for sure confirms that grip shipped with the gun way back when.
The ejector rod knob is what is known as "knurled" and is the same diameter as the rod, hence NOT needing the milled out (relieved) flat underneath the barrel. The pics below of my 1947 with what is known as the LERK (Large Ejector Rod Knob) show the difference to my 1948 which is like yours.
My 1947 had the one line address, yours has the 4 line address, like my 1948.
Your pic of the left side frame with grip off confirms that the S&W factory did NOT do the refinish as there is no "star" with a date code stamped.
If you really had a burning desire to find out where and when it actually shipped from S&W, and in what finish and configuration you can send for a Letter of Authentication (cost $100) but with the refinish I doubt it would be worth it as it does not have Collector status anymore.
Even so with the nice job on the plating I think you have a very nice shooter and can enjoy the heck out of that gun, and I can say that if I had seen it for $700 before you...it would be here at my place.
If you find that the cylinder charge holes are "tight", or that fired cases are hard to extract, there is a very simple fix by reaming with a Manson Finisher Cylinder Reamer very slightly. There are several posts about this easy fix over in the gunsmithing sub-forum.
Enjoy that gun........No ONE makes anything like it anymore!
__________________
Charlie B
SWCA#3083, SWHF#570
|
The Following 6 Users Like Post:
|
|
05-18-2024, 09:33 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,861
Likes: 13,152
Liked 40,139 Times in 10,194 Posts
|
|
If I ever sent a gun to get non blue finish the Armamalloy, Metalife type of hard chrome would be my choice. Not only is it a bonded on forever finish, but it has a lower coefficient of friction than steel on steel. I would say a K22 with that finish ids worth $700 all day long. If you find a K22 for less it will not be in the best shape.
Ya, I know some guy got luck and found one for $600 2 years ago. Far and few between now days
Last edited by steelslaver; 05-18-2024 at 09:38 AM.
|
The Following 6 Users Like Post:
|
|
05-18-2024, 02:36 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2008
Location: South Carolina
Posts: 7,321
Likes: 19,415
Liked 11,420 Times in 3,386 Posts
|
|
Quote:
Originally Posted by glowe
To be sure of the metal that was used, grab a magnet. If it sticks, it is almost certain it is steel. That K22 was definitely manufactured in 1948 and as noted above, likely shipped that same year. Manufacture of K frame Masterpiece revolvers made in 1948 ran from K18732 to K73121.
|
Gary, thanks for that information. My K22 Masterpiece’s serial number is K18806. I knew that it was a 1948, but didn’t realize that it was a very early one.
Larry
__________________
Miss Buddies crsides & fat tom
|
05-18-2024, 02:49 PM
|
Member
|
|
|
Join Date: Dec 2012
Location: Connecticut
Posts: 1,542
Likes: 4,888
Liked 3,679 Times in 1,057 Posts
|
|
Welcome to the forum OP. Sure looks like hard chrome to me also. I recently purchased this 29-3 which the gunsmith who took it in, who knew the owner, believed it to be Metallife. I also have a model 19 that was hard chromed.
Last edited by Baxter6551; 05-18-2024 at 07:03 PM.
|
The Following 3 Users Like Post:
|
|
05-18-2024, 03:46 PM
|
|
SWCA Member
|
|
|
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,004
Likes: 35,185
Liked 10,829 Times in 3,694 Posts
|
|
Quote:
Originally Posted by jcelect
The hard chrome finishes I have seen were slightly different in color when compared to a Factory SS revolver like a 629,686,657, etc., under good LED or fluorescent (Daylight Tint)!
A question for the posters that own, or have owned, a hard chrome finished gun! Where can I get one of these finishes done to a gun today and what is the approx. cost?
jcelect
|
Accurate Plating and Weaponry in Newville, AL does hard chrome plating.
__________________
Guy
SWHF #474 SWCA LM#2629
|
The Following 2 Users Like Post:
|
|
05-18-2024, 03:54 PM
|
SWCA Member
|
|
|
Join Date: Aug 2005
Posts: 7,798
Likes: 3,566
Liked 6,823 Times in 2,658 Posts
|
|
That is not stainless steel, and the finish is not factory original.
|
05-18-2024, 04:19 PM
|
|
Member
|
|
|
Join Date: May 2004
Location: Tennessee, USA
Posts: 4,946
Likes: 7,029
Liked 8,621 Times in 2,685 Posts
|
|
Everyone else has covered all the pertinent info about your K-22.........I just want to say that I think it's a unique and desirable K-22 IMO. Congrats on obtaining a great gun. Shoot it and enjoy.
Don
__________________
Laus Deo! <><
|
The Following 2 Users Like Post:
|
|
05-18-2024, 06:35 PM
|
SWCA Member
|
|
|
Join Date: Apr 2008
Location: Western Washington
Posts: 1,413
Likes: 225
Liked 1,328 Times in 361 Posts
|
|
My K-22 serial number is K50415 and shipped in October of 1948.
|
The Following User Likes This Post:
|
|
05-18-2024, 08:12 PM
|
|
SWCA Member
|
|
|
Join Date: Oct 2006
Location: AZ
Posts: 6,969
Likes: 28,211
Liked 46,160 Times in 4,873 Posts
|
|
Just re-posting your photos LARGE (I get tired of clicking on the small icons)
Quote:
Originally Posted by Samuel2223
|
...AND FOR $700, there is no way I would have left that gun with its previous owner. Like I said - Not collectible, but A GREAT GUN!!!
__________________
Richard
Engraved S&W fan
|
The Following 3 Users Like Post:
|
|
05-18-2024, 09:06 PM
|
SWCA Member
|
|
|
Join Date: Dec 2005
Location: Portland, OR
Posts: 5,286
Likes: 977
Liked 6,637 Times in 1,360 Posts
|
|
In answer to the original question, here is a stainless steel 4" K-22 revolver stamped as a model 65. The factory letter comes next; here is the short version. In 1971, the factory built 17 of these revolvers, and stamped them as Model 65. Several years later, a marketing survey revealed no significant demand, so they were ordered to be destroyed. Before that actually happened, Roy Jinks was given one of them, that I have owned since the death of Wayne Betz. The Model 65 was then used for what would otherwise have been a Model 64-1.
The next pictures are the model stamping in the yoke, and then pictures of the gun.
The bottom line is that, today, there exists one K-22 Model 65 and many 357 heavy-barrel 357 M&P's Model 65.
Regards, Mike Priwer
Last edited by mikepriwer; 05-19-2024 at 11:06 AM.
|
The Following 13 Users Like Post:
|
22hipower, Baxter6551, boykinlp, glowe, handejector, Hawg Rider, JayCeeNC, JD3006, Muley Gil, RKmesa, stansdds, Wiregrassguy, woodsltc |
05-19-2024, 05:05 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2008
Location: South Carolina
Posts: 7,321
Likes: 19,415
Liked 11,420 Times in 3,386 Posts
|
|
Quote:
Originally Posted by mikepriwer
In answer to the original question, here is a stainless steel 4" K-22 revolver stamped as a model 65. The factory letter comes next; here is the short version. In 1971, the factory built 17 of these revolvers, and stamped them as Model 65. Several years later, a marketing survey revealed no significant demand, so they were ordered to be destroyed. Before that actually happened, Roy Jinks was given one of them, that I have owned since the death of Wayne Betz. The Model 65 was then used for what would otherwise have been a Model 64-1.
The bottom line is that, today, there exists one K-22 Model 65 and many 357 heavy-barrel 357 M&P's Model 65.
Regards, Mike Priwer
|
Mike, that is a quite a story for what is now an EXTREMELY rare revolver. Thanks for sharing.
Larry
__________________
Miss Buddies crsides & fat tom
|
The Following 2 Users Like Post:
|
|
|
Posting Rules
|
|
|
|
|