|
|
11-23-2021, 06:24 PM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
25-2 .45 Colt
Picked up a 25-2 from a buddy...he took it in a trade and didn't really need it. It has some confusing characteristics based on the little amount of research I've done. Numbered N3388XX, 6" barrel with ramp front sight, orange insert, .45 Colt CTG on right side. No 1950, no 1955, no target front sight. Any info appreciated. My guess is a non-original barrel and a .45 Colt cylinder? All of my other Smiths are Model 10s...I'm new to the 25.
|
The Following 3 Users Like Post:
|
|
11-23-2021, 06:38 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 5,418
Likes: 2,870
Liked 3,345 Times in 1,706 Posts
|
|
I suspect you are right! Although, it could be a 25-5 that was mismarked. I suppose. I remember when Smith did not make a .45 Colt, and when they brought one out it was only in four inch, as a normal production gun. Later, they added the longer barrels. They didn't make a four inch 25-2 back then, either. But, I have to wonder why someone would convert a 25-2 into a 25-5 configuration? Interesting.
__________________
Richard Gillespie
FBINA 102
|
The Following User Likes This Post:
|
|
11-23-2021, 08:36 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Central Texas
Posts: 1,489
Likes: 2,637
Liked 1,588 Times in 713 Posts
|
|
Pictures might help with more info.
__________________
Pine_Worker
Ex-LEO, NRA Life
|
The Following User Likes This Post:
|
|
11-23-2021, 08:48 PM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
We need photographs to be able to accurately establish what you have but I am betting it is a plain Model 25-5, that is mismarked. I have one that was built with a Model 25-2 frame and that mark is over stamped Model 25-5. The side of the barrel reads 45 COLT CTG. It has a red ramp front sight with a white outline rear sight.
I have used it successfully on many deer hunts. I am currently hoping to find someone who wants it more than I do,
Kevin
__________________
Unshared knowledge is wasted.
|
11-24-2021, 11:40 AM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
Not very adept at picture posting as of yet...but here are some I took with my phone....low quality.
|
The Following 5 Users Like Post:
|
|
11-24-2021, 02:39 PM
|
Member
|
|
|
Join Date: Aug 2008
Location: OBWAT, TN
Posts: 440
Likes: 758
Liked 725 Times in 258 Posts
|
|
Definitely a .45 Colt cylinder and barrel. 25-2 stamp doesn't work, of course. Looks like a real good shooter to me... Nice blue, stocks, and case hardening on the hammer and trigger.
Sometimes the sum of the parts are worth more than the "whole"...
Now all you need are some dies, a lead pot, bullet molds, and brass... assuming you handload, of course. Enjoy.
|
11-24-2021, 04:04 PM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
So, I'm guessing a letter from S&W is the only way to determine how she left the factory, correct?
|
11-24-2021, 09:01 PM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
If you could provide a photograph of where the model number is, or would be stamped, that could help. Also, the markings on the right side of the barrel. The serial number might help also.
Kevin
__________________
Unshared knowledge is wasted.
|
11-25-2021, 08:01 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
It looks it has the short cylinder of the 25-3 vintage vs the longer 44 mag length cylinder of 25-5 vintage. That means a 25-5 barrel would not work with that cylinder as the barrel shank would be to short unless enough was taken off shoulder to allow 4 more turns of barrel in frame and then you would need to shorten the ejector rod way up.
So, it is either a miss marked 25-3 or a 25-2 modified using parts from a 25-3
Might be pictures though. How much room between frame and cylinder
25-5 type
25-3 type
Last edited by steelslaver; 11-25-2021 at 08:12 AM.
|
The Following 4 Users Like Post:
|
|
11-25-2021, 09:49 AM
|
Member
|
|
|
Join Date: May 2010
Location: The Steel City
Posts: 2,158
Likes: 6,840
Liked 4,405 Times in 1,409 Posts
|
|
Pretty easy conversion using a .44 Magnum cylinder. I bought the cylinder on ebay and dropped the gun off a Andy Horvath's shop. The factory blueing was an excellent match.
|
11-25-2021, 09:33 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
I have used 44 mag cylinders several times. If you use a recessed one you can end up with a recessed 45 colt.
|
The Following User Likes This Post:
|
|
11-26-2021, 12:44 AM
|
SWCA Member
|
|
|
Join Date: Aug 2012
Location: central Texas
Posts: 1,136
Likes: 2,782
Liked 1,291 Times in 637 Posts
|
|
I probably missed a clue, but is it a 25-2 125th anniversary edition? They were chambered in .45 Colt with 6.5" barrels.
__________________
Mike H
|
11-26-2021, 09:11 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
the 125 anniversary guns were marked 25-3
|
The Following 2 Users Like Post:
|
|
11-26-2021, 07:02 PM
|
|
US Veteran
|
|
|
Join Date: Apr 2001
Location: Bartlett, Tennessee
Posts: 7,621
Likes: 2,935
Liked 18,705 Times in 4,791 Posts
|
|
My guess is a mis-marked frame. It looks to right for a 25-5 to be a conversion.
|
11-26-2021, 10:19 PM
|
Member
|
|
|
Join Date: May 2004
Location: Iowa
Posts: 4,106
Likes: 14,444
Liked 3,764 Times in 1,784 Posts
|
|
You probably have a 'Franken' gun
Your pictures clearly show the pin that secures the barrel to the frame is buggered notably. If the pin was removed, the barrel was probably changed. Neither 25-2 or 25-5s normally have a red insert in the front sight. If you lettered the gun you'd probably find the gun left the factory with a 6 1/2" barrel and Patridge front sight. Someone later on switched the barrel to 45 Colt. The cylinder has probably been changed to 45 Colt or reamed to accept 45 Colt cartridges.
The gun is a homemade shooter, not a valuable "one-of-a-kind"gun.
__________________
Bob.
SWCA 1821
|
The Following User Likes This Post:
|
|
11-27-2021, 06:10 AM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
Quote:
Originally Posted by S&WIowegan
…Your pictures clearly show the pin that secures the barrel to the frame is buggered notably. If the pin was removed, the barrel was probably changed…
|
I don’t see that in the supplied pictures but it is possible.
Quote:
Originally Posted by S&WIowegan
…Neither 25-2 or 25-5s normally have a red insert in the front sight…
|
Are you sure about that? I agree the majority of the Model 25-2 revolvers came with a Patridge sight but I have not seen a Model 25-5 that did not have a red ramp.
Kevin
__________________
Unshared knowledge is wasted.
|
The Following 4 Users Like Post:
|
|
11-27-2021, 12:02 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
Agree. I've owned several 25-5's that had red ramp / white outline sights. One I owned had green ramp / white outline.
Quote:
Originally Posted by StrawHat
I don’t see that in the supplied pictures but it is possible.
Are you sure about that? I agree the majority of the Model 25-2 revolvers came with a Patridge sight but I have not seen a Model 25-5 that did not have a red ramp.
Kevin
|
|
11-27-2021, 08:55 PM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
Here is a pic of the Model # and S#.
|
The Following User Likes This Post:
|
|
11-27-2021, 09:31 PM
|
SWCA Member
|
|
|
Join Date: May 2008
Location: Austin, Texas
Posts: 1,347
Likes: 124
Liked 1,658 Times in 642 Posts
|
|
If you were a member of the SWCA , You could use their side of the forum to ask Roy if it left the factory as a .45 colt. Just sayin
SWCA 892
|
The Following User Likes This Post:
|
|
01-10-2022, 01:17 PM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
Quote:
Originally Posted by S&WIowegan
Your pictures clearly show the pin that secures the barrel to the frame is buggered notably. If the pin was removed, the barrel was probably changed. Neither 25-2 or 25-5s normally have a red insert in the front sight. If you lettered the gun you'd probably find the gun left the factory with a 6 1/2" barrel and Patridge front sight. Someone later on switched the barrel to 45 Colt. The cylinder has probably been changed to 45 Colt or reamed to accept 45 Colt cartridges.
The gun is a homemade shooter, not a valuable "one-of-a-kind"gun.
|
Your are correct, sir! Roy confirms that the gun was shipped in July 1976 as a .45 ACP.
|
01-10-2022, 02:40 PM
|
Member
|
|
|
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 6,952
Likes: 4,432
Liked 10,074 Times in 3,693 Posts
|
|
I have 3 m25-5s , two of them have the non removable red ramp and one has pinned Patridge blade. I got a NIB 25-3 with RR too. My 25-2s are pinned barrels & blades.
I’m not near as knowledgeable as many on forum but I’m pretty good at spotting parts guns, no matter how well done.
|
01-10-2022, 08:52 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
I think the OP's gun is a 25-2 that has a 25-3 cylinder and barrel installed.
|
01-10-2022, 09:30 PM
|
Member
|
|
|
Join Date: Nov 2021
Posts: 16
Likes: 4
Liked 11 Times in 5 Posts
|
|
Quote:
Originally Posted by Model19man
I think the OP's gun is a 25-2 that has a 25-3 cylinder and barrel installed.
|
Quite possible.
|
The Following User Likes This Post:
|
|
01-16-2022, 12:03 AM
|
Member
|
|
|
Join Date: Oct 2016
Location: Marana, AZ
Posts: 628
Likes: 2,108
Liked 3,098 Times in 500 Posts
|
|
I didn't know a Model 25 in 45 ACP could be converted to a 45 Colt. I thought the cylinder lengths were different. Learn something new every day.
Here is my 25-5 to compare yours to. By clicking on the photo you can see enlargement.
S&W Model 25-5 in 45 Colt.
Hope this helps.
Birdgun
Last edited by Birdgun; 01-16-2022 at 12:19 AM.
|
The Following 6 Users Like Post:
|
|
01-16-2022, 07:00 AM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
Chris,
Just curious, does the frame lug show any signs of modification? The 45 ACP cylinder requires a longer frame lug than the 45 long Colt cylinder. When I built my ACP revolver from a Model 28-2 frame I had to remove and replace the frame lug so the cylinder did not slide to the rear when ejecting shells.
On your revolver either the frame lug or the cylinder would have to be modified so the cylinder would properly function.
Kevin
__________________
Unshared knowledge is wasted.
|
01-16-2022, 08:22 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
Quote:
Originally Posted by StrawHat
Chris,
Just curious, does the frame lug show any signs of modification? The 45 ACP cylinder requires a longer frame lug than the 45 long Colt cylinder. When I built my ACP revolver from a Model 28-2 frame I had to remove and replace the frame lug so the cylinder did not slide to the rear when ejecting shells.
On your revolver either the frame lug or the cylinder would have to be modified so the cylinder would properly function.
Kevin
|
I have done the 2 cylinder deal using a 357 cylinder to make a short 45 colt cylinder that would work in an acp gun. First one I ever did in fact. I did have to file back the frame lug of course. Using the 45 acp cylinder the cylinder moved back the .040 rear difference the acp cylinder need for clip thickness, But, ejected fine and when you rolled gun muzzle down to reload the cylinder closed up fine. If you held it muzzle up and closed cylinder the center pin would some times hand on edge of recoil shield. Making the dip in the recoil shield a bit deeper took care of that. But closing a loaded cylinder with muzzle up has the problem of the rounds falling out anyway so not really a problem.
There is another fix I tried to. Machine a .040 cut slightly deeper than lug engagement on rear corner of colt cylinder. This allows the very outside corner of cylinder to clear the lug and when you eject the new shoulder presses against the lug. Works even though it looks kind of odd.
I don't think most peopple with dual clinder guns even nottice the slop.
Mostly I abandon the dual cylinder deal and went with the recessed cylinder method. That way no cylinder change needed.
Full mooned clipped 45acp set inn recess and portion of 45 colt rim sits on ring of material on outside of cylinder face holds proper headspace for that round.
This cylinder that lives in my 4" gun has had a lot of both acp and colts
It also works in K framed 38 cylinders to shoot 9mm, But you need to hit chamber with a 9mm reamer and that causes 38 brass swells a bit at base
|
The Following 3 Users Like Post:
|
|
01-16-2022, 08:38 AM
|
|
Member
|
|
|
Join Date: May 2004
Location: Spfld., IL.
Posts: 544
Likes: 958
Liked 589 Times in 239 Posts
|
|
Quote:
Originally Posted by Birdgun
I didn't know a Model 25 in 45 ACP could be converted to a 45 Colt. I thought the cylinder lengths were different. Learn something new every day.
Here is my 25-5 to compare yours to. By clicking on the photo you can see enlargement.
S&W Model 25-5 in 45 Colt.
Hope this helps.
Birdgun
|
Cylinder lengths are different, but so are the lengths of the forcing cone part of the barrel. . 45 Colt bbl. Has less jutting into the cylinder window,
Beautiful gun, btw....
|
The Following 2 Users Like Post:
|
|
01-16-2022, 11:21 PM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
Quote:
Originally Posted by steelslaver
?.. I have done the 2 cylinder deal using a 357 cylinder to make a short 45 colt cylinder that would work in an acp gun. First one I ever did in fact. I did have to file back the frame lug of course. Using the 45 acp cylinder the cylinder moved back the .040 rear difference the acp cylinder need for clip thickness, But, ejected fine and when you rolled gun muzzle down to reload the cylinder closed up fine. If you held it muzzle up and closed cylinder the center pin would some times hand on edge of recoil shield. Making the dip in the recoil shield a bit deeper took care of that. But closing a loaded cylinder with muzzle up has the problem of the rounds falling out anyway so not really a problem.
There is another fix I tried to. Machine a .040 cut slightly deeper than lug engagement on rear corner of colt cylinder. This allows the very outside corner of cylinder to clear the lug and when you eject the new shoulder presses against the lug. Works even though it looks kind of odd.
I don't think most people with dual clinder guns even nottice the slop.
Mostly I abandon the dual cylinder deal and went with the recessed cylinder method. That way no cylinder change…
|
I did not want dual cylinders. Started with Model 28-2 and fit a 25-2 cylinder. About the 10th or 12th reload, I noticed the lug was beating the cylinder or the other way around. Used an arbor press to punch out the old ring and to punch in the new one.
How can one not notice the running start of the cylinder prior to ejecting the brass?
Kevin
__________________
Unshared knowledge is wasted.
|
01-17-2022, 11:08 AM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
The 45 Colt cylinder is a different length in a Smith 25-5 than the 45 Colt cylinders that Smith and Wesson used for the 25-2, 25-3 and 25-4 revolvers. That way it is a drop-in replacement for the 45 ACP cylinder that comes in a 25-2.
Quote:
Originally Posted by Birdgun
I didn't know a Model 25 in 45 ACP could be converted to a 45 Colt. I thought the cylinder lengths were different. Learn something new every day.
Here is my 25-5 to compare yours to. By clicking on the photo you can see enlargement.
S&W Model 25-5 in 45 Colt.
Hope this helps.
Birdgun
|
|
01-17-2022, 12:04 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,484
Likes: 228
Liked 2,398 Times in 1,082 Posts
|
|
Quote:
Originally Posted by StrawHat
I don’t see that in the supplied pictures but it is possible.
Are you sure about that? I agree the majority of the Model 25-2 revolvers came with a Patridge sight but I have not seen a Model 25-5 that did not have a red ramp.
Kevin
|
I owned a 25-2 that came from the factory with red ramp front and white outline rear. Ive seen a couple of others. Not common, it they do exist
|
The Following User Likes This Post:
|
|
01-17-2022, 01:34 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
Quote:
Originally Posted by StrawHat
I did not want dual cylinders. Started with Model 28-2 and fit a 25-2 cylinder. About the 10th or 12th reload, I noticed the lug was beating the cylinder or the other way around. Used an arbor press to punch out the old ring and to punch in the new one.
How can one not notice the running start of the cylinder prior to ejecting the brass?
Kevin
|
The running start is only goes for .040 distance. I never made it a habit to slam the cylinder back. i usually open the cylinder muzzle down roll it up and then eject. As you roll the muzzle up gravity should slide the cylinder back against the lug. I don't see how an cylinder and empty brass is heavy enough to get enough energy sliding .04 of travel to batter the steel lug.
But, then I gave up on dual cylinder guns. Just because changing cylinders is a hassle Even with an extra yoke. Only dual guns I have now are via the recessed method.
But if you use the recess cut in rear of colt cylinder both cylinder will have minimal rearward movement against the lug
Last edited by steelslaver; 01-17-2022 at 01:36 PM.
|
The Following User Likes This Post:
|
|
01-23-2022, 06:38 PM
|
|
Member
|
|
|
Join Date: Feb 2003
Posts: 1,617
Likes: 49
Liked 721 Times in 369 Posts
|
|
Quote:
Originally Posted by Nightowl
I suspect you are right! Although, it could be a 25-5 that was mismarked. I suppose. I remember when Smith did not make a .45 Colt, and when they brought one out it was only in four inch, as a normal production gun. Later, they added the longer barrels. They didn't make a four inch 25-2 back then, either. But, I have to wonder why someone would convert a 25-2 into a 25-5 configuration? Interesting.
|
Is the cylinder long enough for this conversion if it were originally a 25-2?
Steve
|
01-23-2022, 07:35 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
I just measured my 25-2 with dual cylinders.
The 45 Colt cylinder measures 1.667"
The 45 ACP cylinder measures 1.537"
I also have a 25-3 which is only chambered for 45 Coit.
The 45 Colt cylinder measures 1.667"
45 Colt ammo specs are 1.570" OAL.
Quote:
Originally Posted by S.B.
Is the cylinder long enough for this conversion if it were originally a 25-2?
Steve
|
Last edited by Model19man; 01-23-2022 at 07:37 PM.
|
01-23-2022, 07:44 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 4,076
Likes: 0
Liked 9,470 Times in 2,666 Posts
|
|
Quote:
Originally Posted by S.B.
Is the cylinder long enough for this conversion if it were originally a 25-2?
Steve
|
In addition to the overall length of the cartridge in the cylinder, I believe it will also require enough length to accommodate the cylinder throat... ...Ben
__________________
Cogito, ergo BOOM!...
|
01-23-2022, 08:47 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
There's no way to make a 25-2 45 ACP cylinder work to fire 45 Colt.
Easy button: Install a 25-3 cylinder. If one could be found.
Quote:
Originally Posted by Truckman
In addition to the overall length of the cartridge in the cylinder, I believe it will also require enough length to accommodate the cylinder throat... ...Ben
|
|
01-23-2022, 09:36 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
I used to own a pinned barrel 25-5 with a green ramp / White outline sight set. Liked it a lot. Lost it in a burglary in the 1980's.
Quote:
Originally Posted by StrawHat
I don’t see that in the supplied pictures but it is possible.
Are you sure about that? I agree the majority of the Model 25-2 revolvers came with a Patridge sight but I have not seen a Model 25-5 that did not have a red ramp.
Kevin
|
|
01-23-2022, 10:22 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,484
Likes: 228
Liked 2,398 Times in 1,082 Posts
|
|
I seem to recall that perhaps a handful of .45 Colts were produced prior to the 25-3. No reference, just a dim memory. Old man who’s had a few cocktails this evening.
|
The Following 2 Users Like Post:
|
|
01-23-2022, 11:05 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,720
Likes: 12,861
Liked 39,497 Times in 10,053 Posts
|
|
Quote:
Originally Posted by Model19man
I just measured my 25-2 with dual cylinders.
The 45 Colt cylinder measures 1.667"
The 45 ACP cylinder measures 1.537"
I also have a 25-3 which is only chambered for 45 Coit.
The 45 Colt cylinder measures 1.667"
45 Colt ammo specs are 1.570" OAL.
|
Measure those cylinders again. The acp cylinder may be .030 shorter, but not 0.130 shorter
epj yes some 45 colts were produced before the 25-3 strictly on a special order and very few of those
Last edited by steelslaver; 01-23-2022 at 11:08 PM.
|
01-23-2022, 11:06 PM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,089
Likes: 9,355
Liked 13,787 Times in 4,046 Posts
|
|
Quote:
Originally Posted by epj
I seem to recall that perhaps a handful of .45 Colts were produced prior to the 25-3. No reference, just a dim memory. Old man who’s had a few cocktails this evening.
|
Yes, there were some of the Model 1950, 45 Target revolvers built to accept the 45 long Colt cartridge. Not many, maybe a dozen?
Kevin
__________________
Unshared knowledge is wasted.
|
01-23-2022, 11:48 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,458
Likes: 666
Liked 1,577 Times in 669 Posts
|
|
Correct you are! I added .100 to the 45 Colt cylinders by mistake. The difference is in fact .030”.
Quote:
Originally Posted by steelslaver
Measure those cylinders again. The acp cylinder may be .030 shorter, but not 0.130 shorter
epj yes some 45 colts were produced before the 25-3 strictly on a special order and very few of those
|
Last edited by Model19man; 01-24-2022 at 09:52 AM.
Reason: Added photo
|
02-15-2022, 01:14 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,484
Likes: 228
Liked 2,398 Times in 1,082 Posts
|
|
Quote:
Originally Posted by S&WIowegan
Your pictures clearly show the pin that secures the barrel to the frame is buggered notably. If the pin was removed, the barrel was probably changed. Neither 25-2 or 25-5s normally have a red insert in the front sight. If you lettered the gun you'd probably find the gun left the factory with a 6 1/2" barrel and Patridge front sight. Someone later on switched the barrel to 45 Colt. The cylinder has probably been changed to 45 Colt or reamed to accept 45 Colt cartridges.
The gun is a homemade shooter, not a valuable "one-of-a-kind"gun.
|
25-2’s with factory red ramp front sight are not common, but they aren’t rare either. I had one, and have seen a few others.
|
The Following User Likes This Post:
|
|
02-19-2022, 04:12 AM
|
Member
|
|
|
Join Date: Dec 2009
Posts: 2,456
Likes: 240
Liked 6,215 Times in 1,575 Posts
|
|
25-2 .45 Colt
Quote:
Originally Posted by epj
25-2’s with factory red ramp front sight are not common, but they aren’t rare either. I had one, and have seen a few others.
|
I have two of them…..
Last edited by moralem; 02-19-2022 at 04:14 AM.
|
The Following 2 Users Like Post:
|
|
|
Posting Rules
|
|
|
|
|