|
|
03-05-2012, 08:40 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2012
Location: Minnesota
Posts: 120
Likes: 35
Liked 186 Times in 46 Posts
|
|
Finish on New Airweight J Frames
Does anyone know what the actual finish is on the frame of the S&W Airweight J Frames. Is is anodized aluminum, or some type of coating? How does it hold up in daily carry usage? Does either the silver or black hold up better to daily holster use? It seems like the finish would scratch fairly easily.
|
03-05-2012, 09:12 PM
|
SWCA Member
|
|
|
Join Date: May 2009
Location: Rural Midwest
Posts: 421
Likes: 30
Liked 386 Times in 111 Posts
|
|
The 642 has a spray-on 'clear coat.' Some folks have had trouble with it peeling and other folks have had good luck with it. I think the first few years of the clear coat were the most problematic.
Smith and Wesson warns not to use harsh cleaning chemicals on the finish. I have had my 642 for several years and carry it regularly. I have had zero problems. The finish, so far, has worn better than most of my older blued firearms. The wear is so unnoticable I would have to show you where it is.
I use Breakfree CLP to clean, lubricate, and protect the stainless parts (cylinder and barrel). I use paste wax on the clear coat. As I have stated before, you must wear through the wax before you can wear through the finish.
|
03-05-2012, 09:21 PM
|
|
Member
|
|
|
Join Date: Oct 2000
Location: The Great State of Texas
Posts: 5,057
Likes: 524
Liked 1,909 Times in 788 Posts
|
|
The 642 is actually two different layers of paint, one silver and one clear. It does chip. I'm not sure what the 442 has but it seems to be a single layer and scratches easily. Both finishes are somewhat fragile.
__________________
Centennial Every Day
|
03-05-2012, 09:57 PM
|
Banned
|
|
|
Join Date: Nov 2001
Location: Se. Pa.
Posts: 1,330
Likes: 67
Liked 81 Times in 50 Posts
|
|
442s are easily touched up with Aluminum Black. You can't touch up a 642.
|
03-06-2012, 09:23 AM
|
Member
|
|
|
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
|
|
Oh how I long for the days when they really anodized aluminum. I have a Daisy air-pistol I bought for my son some 25 to 30-years ago and it still looks almost brand new.
I know the 317 also has the coating and after a few thousand rounds, it will begin to peel off the cylinder and leave a brownish ring at the juncture of where it is and where it ain't. The frame will also scratch very easily and I recommend the use of a rubber screwdriver to remove any screws.
It is what it is.
|
03-06-2012, 11:28 AM
|
US Veteran
|
|
|
Join Date: Nov 2011
Location: La Conner, WA
Posts: 2,138
Likes: 9,096
Liked 2,174 Times in 974 Posts
|
|
[QUOTE=snubbiefan;136389645]Oh how I long for the days when they really anodized aluminum. I have a Daisy air-pistol I bought for my son some 25 to 30-years ago and it still looks almost brand new.
I think they want the different parts to match, so everything just gets painted. I would rather that each part would get whatever finish works best for that metal. That would probably mean leaving the stainless steel "bare". Then, the aluminum could be properly anodized . I don't think the stainless can be anodized.
rat
|
03-06-2012, 03:00 PM
|
|
Member
|
|
|
Join Date: Dec 2010
Location: USA
Posts: 38
Likes: 6
Liked 14 Times in 6 Posts
|
|
I am not sure if the Scandium framed guns are much differant in their finish process but I have a 342PD Airlite that I bought used a year or so ago and even with daily wear it shows no wear. I shoot it regularly but its not like you are going to be putting it in and out of the holster all day. I wear mine in an Alliessi deep cover and it fits tight with no rubbing, too tight maybe. The Titanium on the Airlites will discolor but I consider mine a tool and not a show and tell item, i have others for that. I only ever use a soft cloth and Lucas gun oil on the outside.
I did recently buy a M&P 9 and that finish is practicly rubbing of in my hand, it wont last like the alloys.
|
|
Tags
|
317, 442, 642, airlite, airweight, daisy, j frame, scandium, screwdriver, smith & wesson, smith and wesson, titanium |
Posting Rules
|
|
|
|
|
All times are GMT -4. The time now is 03:21 AM.