|
|
05-11-2012, 09:11 PM
|
Member
|
|
|
Join Date: Oct 2011
Posts: 26
Likes: 3
Liked 7 Times in 5 Posts
|
|
WHAT'S YOUR FAVORITE MOUNTAIN GUN?
I'm on the prowl for a Mountain Gun at the LGS's I frequent. Over the years, I've seen some of the different models, but there is no comprehensive list of models and calibers that I've been able to locate.
I don't have a real mountain gun per se. I have a M386 SC Mountain Lite, a M329PD as well as a pre-1980 M29 4". I'm interested in what passes for mountain guns with other folks, not just those labeled as "Mountain Gun".
I'd like to find something with a five inch barrel, maybe in .41 magnum or .44 magnum. But I need to get a model number once I decide what I'd like so I can do some searching on auction websites.
If you'd post a pic of your favorite mountain gun with model number information, I'd be much obliged.
|
05-11-2012, 10:00 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,785
Likes: 2,487
Liked 8,326 Times in 2,922 Posts
|
|
Greg,
Mountain guns all share a similar configuration,
4 inch tapered barrel with a blue Baughman FS and a round butt.
Most are SS with chamfered cylinders but not always.
Beyond that it really depends on what caliber you prefer.
I only have 2 MG's,
My first was a 629-2 in .44 magnum (top)
The second is a 7 shot L frame 686-5 in .357 Magnum.
Different guns in caliber, frame size and round capacity that I like equally but for different reasons and would be hard pressed to choose between.
MG's have a similar look to the nickel 4" Model 27, 28 and 24 in RB.
Current versions have MIM parts and the internal lock but if I could change one feature
(other than that) I would prefer a square butt frame.
This picture is of my 629-2 and 686-5 Mountain guns above a Nickel Model 19-4 all wearing Herrets wood SB presentation grips.
Last edited by Engine49guy; 05-11-2012 at 10:03 PM.
|
The Following User Likes This Post:
|
|
05-11-2012, 10:25 PM
|
|
Member
|
|
|
Join Date: Mar 2012
Location: SW Washington State
Posts: 416
Likes: 99
Liked 780 Times in 168 Posts
|
|
Well, what's a "mountain"? Here in the Cascade Mtns. of Washington, I guess most hikers/hunters don't think of hills as mountains until they approach 5,000'. We have lots of timber on our slopes (unless above tree-line) and rainfall varies from 50" - 150" per year. Many places have snow year-round and/or alpine swamps. All of the rocks are rough and the Devil's Club is spiny.
A mountain gun must be:
1. Comfortable to carry -- Light, compact & portable so it doesn't impede movement as you climb up and down steep slopes or negotiate fallen timber all day.
2. Resistant to weather since it will be exposed to the elements for protracted periods of time.
3. Accurate, since you may only get one shot
4. Utterly reliable, since your meal or life may depend on it
5. Able to take abuse, since you'll fall, scrape, rub, sit and generally have to move through rough terrain. Holsters get soaked and your gun will be sitting in one most of the time.
6. Quick to draw, because you might need it really fast.
If I only bring one gun, it will be my 4" 629 .44 magnum/.44 spl. At 41 oz. it is about as heavy as I care to tote and has plenty of power for a cougar and hopefully a bear if placed right. If I'm in the mountains for an extended stay, I'll have a long gun - either a rifle or shotgun, in which case my mountain revolver likely becomes my 6.5" Ruger Super Single Six Convertible (I usually only use the .22 lr cylinder).
Mountains aren't a place for Queens, but for performers. Clean Break
|
The Following 2 Users Like Post:
|
|
05-11-2012, 11:50 PM
|
Member
|
|
|
Join Date: Sep 2007
Location: Southwestern Ohio
Posts: 2,337
Likes: 209
Liked 1,195 Times in 457 Posts
|
|
My "Mountain Gun" is a 4" Model 624 (.44 Special). Of course, it is not cataloged as a Mountain Gun but it is to me...
Dale53
Last edited by Dale53; 05-13-2012 at 10:49 AM.
|
The Following User Likes This Post:
|
|
05-12-2012, 01:02 AM
|
Member
|
|
|
Join Date: Oct 2006
Location: Utah
Posts: 125
Likes: 1
Liked 15 Times in 11 Posts
|
|
My favorite "Mountain Gun" is the 657-4 41 mag that I have. I have several j-frames, and a 3" gp100 that would qualify as great packing trail guns, but for the real label MG in a bigger bore size, , the 41 is what I have. I think it's a great caliber for this somewhat lighter weight 4" N-frame. I have 4 different 41 mags in various styles, but the MG is the one that gets "admired" the most. wyatte
|
The Following User Likes This Post:
|
|
05-12-2012, 01:17 AM
|
Member
|
|
|
Join Date: Nov 2002
Location: Mesa, Arizona
Posts: 2,556
Likes: 882
Liked 1,719 Times in 549 Posts
|
|
My only and favorite Mountain Gun isn't officially a "Mountain Gun". S&W never made a blue steel 45 ACP MG so I had one built. Like its namesakes it has a 4" tapered barrel with a plain ramp front sight. The front shoulder of the cylinder was beveled (not mentioned earlier but a MG feature) and it is a round butt.
I bought a M25-2 on which someone had installed an 6.5" Model of 1950 barrel. I had my gun smith cut it back to 4", then pin the ramp to the rib,and the blade to the ramp (the way Smith used to do it). He then did the other modifications and finally bead blasted and blued the finished product. Most of the MGs I've seen have a matt finish so that aspect of my home made MG is correct too.
I don't worry about it not being in a smashing Magnum caliber as I don't actually go into the mountains. Instead I roam around the desert and sometimes the hills found there. The 45 ACP is more than enough round for the "critters" I will have to worry about. (smile)
Dave
__________________
RSVN '69-'71
PCSD (Ret)
|
05-12-2012, 02:01 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: Phoenix, Arizona
Posts: 1,551
Likes: 2,068
Liked 1,588 Times in 469 Posts
|
|
S&W Mountain Guns were/are made in the following calibers:
1. 357 mag - Model 686 (to my knowledge the only L-frame Mtn Gun)
2. 44 mag - Model 29 and 629 N-frame
3. 41 mag - Model 57 and 657 N-frame
4. 45 Colt - Model 625 N-frame
5. 45 ACP - Model 625 N-frame.
I've got each caliber except 41 mag and I'd be hard pressed to name a favorite. The 7 shot 357 mag is probably the most useful to my needs, but the 45 Colt might be the most fun to shoot due to its accuracy and a sweet trigger. I'm hoping to find a model 657 to round out my collection!
|
05-12-2012, 02:37 AM
|
US Veteran
|
|
|
Join Date: May 2011
Posts: 188
Likes: 8
Liked 53 Times in 37 Posts
|
|
Y'all are on the right track. A mountain gun up in the hills i favor my 686 4 inch and my long gun is a 357 marlin. Aint nothing short of a mad mama bear I can't stop. Well except maybe my wife when shes mad.
|
The Following User Likes This Post:
|
|
05-12-2012, 06:49 AM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 106
Likes: 1
Liked 17 Times in 10 Posts
|
|
I have a 4" Colt Anaconda for that role in .44 magnum.
The underlug helps with recoil but I still wish it was a .41.
|
05-12-2012, 06:58 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2006
Location: North Gawja
Posts: 561
Likes: 204
Liked 159 Times in 59 Posts
|
|
Quote:
Originally Posted by BCDWYO
S&W Mountain Guns were/are made in the following calibers:
1. 357 mag - Model 686 (to my knowledge the only L-frame Mtn Gun)
2. 44 mag - Model 29 and 629 N-frame
3. 41 mag - Model 57 and 657 N-frame
4. 45 Colt - Model 625 N-frame
5. 45 ACP - Model 625 N-frame.
I've got each caliber except 41 mag and I'd be hard pressed to name a favorite. The 7 shot 357 mag is probably the most useful to my needs, but the 45 Colt might be the most fun to shoot due to its accuracy and a sweet trigger. I'm hoping to find a model 657 to round out my collection!
|
They made L-frame Mountain Lite scandium models in .357 and .44 special. Here's a 396 Mountain Lite in .44 special
__________________
GO NAVY!
|
The Following 2 Users Like Post:
|
|
05-12-2012, 10:05 AM
|
|
Member
|
|
|
Join Date: Mar 2012
Location: SW Washington State
Posts: 416
Likes: 99
Liked 780 Times in 168 Posts
|
|
Quote:
Originally Posted by Munsterf18
They made L-frame Mountain Lite scandium models in .357 and .44 special. Here's a 396 Mountain Lite in .44 special
|
Wow that looks great -- as in highly practical. The more I shoot .44 spl, the more I like it. What does your 396 Mountain Lite weigh? Isn't the cylinder titanium?
Clean Break
|
05-12-2012, 10:49 AM
|
|
Member
|
|
|
Join Date: Mar 2004
Location: Canada
Posts: 1,095
Likes: 64
Liked 344 Times in 102 Posts
|
|
I have one, a 629-2. This is one of 5,000 guns produced in 1989.The gun shipped with rubber Pachmyer grips which I replaced with these Hogues.
|
05-12-2012, 11:01 AM
|
Banned
|
|
|
Join Date: Jun 2009
Location: SC/TX
Posts: 618
Likes: 339
Liked 82 Times in 55 Posts
|
|
My favorite is my 625 45LC, by far my favorite, but the 629 is a close second.
|
The Following User Likes This Post:
|
|
05-12-2012, 11:32 AM
|
|
SWCA Member
|
|
|
Join Date: Sep 2009
Location: Home of the Alamo
Posts: 5,841
Likes: 16,537
Liked 15,565 Times in 3,103 Posts
|
|
I vote for the 657 MG. The 41 mag can do anything that the 44 can do, but with less brutality to your hands.
__________________
On the Oak Savannah
|
05-12-2012, 11:48 AM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Montana
Posts: 822
Likes: 503
Liked 453 Times in 254 Posts
|
|
OK, please stop guys... My sickness is growing as I yearn for any Mountain Gun. My "mountain gun" is a 629PC 2 5/8".
Munsterf18 - THAT is a nice looking Mountain Lite.
|
05-12-2012, 11:51 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Location: Northern Mexico/S.E. Tejas
Posts: 646
Likes: 1,280
Liked 428 Times in 169 Posts
|
|
I only have one "Mountain Gun" and it is a 629-4 but I do have a few other Model 29-2 in 4" models. The Mountain gun configuration is 2oz. lighter than the others. It doesn't really make that much difference when you shoot them.
|
05-12-2012, 12:10 PM
|
Member
|
|
|
Join Date: Jun 2003
Location: Greenwood, IN USA
Posts: 446
Likes: 18
Liked 67 Times in 49 Posts
|
|
The Smith version is a tapered barrel, beveled cylinder and round grips and have come in a variety of flavors and there has also been some blued versions, but most are stainless.
My favorite in my 629 MG with the X-frame Hogues grips.
|
05-12-2012, 12:26 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,549
Likes: 89,911
Liked 24,949 Times in 8,539 Posts
|
|
I have owned four Mt Guns: two M629s, one with the lock and one without; a M625 .45 Colt, and a M625 .45 ACP. I sold the M629 with the lock and the .45 Colt.
I carry the M625 .45 ACP the most.
__________________
John 3:16
WAR EAGLE!
|
05-12-2012, 01:13 PM
|
Member
|
|
|
Join Date: May 2011
Posts: 1,424
Likes: 30
Liked 700 Times in 392 Posts
|
|
My official Mountain Gun (rolled on the barrel), is a blue, 29-8 with tapered barrel, but not pinned or recessed. It's a little light for full .44 magnum loads, but I can handle it for 50 rounds or more.
In terms of functionality as a hiking or hunting companion, I think a 3" barrel is sufficient, and a lot easier to carry and put into use. I have one of those in .357 magnum (386-6) and .44 magnum (629-6). The 629 with a 3" standard barrel weighs the same as the 29-8 with a 4" tapered barrel - about 40 oz, dry.
|
05-12-2012, 07:01 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,785
Likes: 2,487
Liked 8,326 Times in 2,922 Posts
|
|
Quote:
Originally Posted by Dave T
The front shoulder of the cylinder was beveled (not mentioned earlier but a MG feature)
Dave
|
Dave the leading edge of the S&W Mountain Gun cylinder is actually "Chamfered" not beveled,
According to Wikepedia chamfer is a beveled edge connecting two surfaces at right angles typically symmetrical at 45 degrees.
The terms are sometimes confused but here is a depiction of a bevel (top) and a chamfer (lower)
Also not all S&W Mountain guns have this feature including the Model 686-5 MG
|
05-12-2012, 08:05 PM
|
Member
|
|
|
Join Date: Aug 2005
Location: Santa Fe, New Mexico
Posts: 340
Likes: 85
Liked 25 Times in 16 Posts
|
|
I've only got one, so I guess it's my favorite: a 629-4 MG. But if someone would send me a 686 MG, I could make a more scientific study of the matter.
|
05-12-2012, 08:54 PM
|
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Central Illinois
Posts: 1,759
Likes: 2,572
Liked 2,697 Times in 607 Posts
|
|
625 SAC 1 of 500 in 45 ACP.
|
05-12-2012, 09:51 PM
|
|
Member
|
|
|
Join Date: Mar 2003
Location: Brandon, FL USA
Posts: 9
Likes: 13
Liked 0 Times in 0 Posts
|
|
I've got the same two Mountain Guns and the same sentiment.
Quote:
Originally Posted by Smee78
My favorite is my 625 45LC, by far my favorite, but the 629 is a close second.
|
__________________
Jon Maguire
|
05-12-2012, 11:01 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 63
Likes: 5
Liked 17 Times in 13 Posts
|
|
I'll go with the 625MG also, although shooting my 629MG is now much more enjoyable after adding the Hogue X-frame stocks.
|
05-13-2012, 02:18 AM
|
|
Member
|
|
|
Join Date: Aug 2003
Posts: 80
Likes: 3
Liked 9 Times in 9 Posts
|
|
With out a doubt, the 657MG. I've got a 357PD but it doesn't balance near as well as the SS mountain gun. Normal carry load is 220grLFNGC over 7.5gr. of Unique. I prefer not to stress the little beauty.
__________________
JOE MACK aka .41FAN
|
05-13-2012, 08:33 AM
|
|
US Veteran
|
|
|
Join Date: Mar 2012
Location: Midwest
Posts: 597
Likes: 347
Liked 214 Times in 99 Posts
|
|
I have a Model 57 "Mountain Gun". It is my favorite revolver in my favorite revolver caliber. I love that Gun!
|
05-13-2012, 09:09 AM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: Illinois
Posts: 178
Likes: 218
Liked 153 Times in 45 Posts
|
|
I have 2 of them one is 625-9 .45 colt and 57-5 .41 mag.
Both are very accurate and easy to carry if need be. Here are a couple of pics both have the factory grips on them my self I like the grips but everyone has a different fit.I hope this helps.
Thanks Rusty
|
05-13-2012, 09:15 AM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,923
Likes: 14,087
Liked 13,775 Times in 4,993 Posts
|
|
I have mtn guns in .357/45acp/45LC/44 mag.. Like them all. No favorites.
__________________
S&W Accumulator
|
05-13-2012, 10:52 AM
|
Member
|
|
|
Join Date: Sep 2007
Location: Southwestern Ohio
Posts: 2,337
Likes: 209
Liked 1,195 Times in 457 Posts
|
|
This is certainly another that is not a "real" Mountain Gun but considering the practical criteria it should meet the standard:
Dale53
|
05-13-2012, 11:55 AM
|
|
Member
|
|
|
Join Date: May 2008
Location: Washington State
Posts: 7,477
Likes: 14,598
Liked 9,314 Times in 3,723 Posts
|
|
625Smith, I'll be in Urbanastan early next month; please have that packed up and ready to go. :-)
I think the 45ACP is my personal favorite and I wish S&W would have made a bunch of them configured like that SAC. I am having a 629-4 (non-MG) converted to 45ACP for such use. I have a 686-5MG; it is pretty much the only "L" frame I would have other than my 296 because I hate the full lug barrels. The .41 is a heck of a round but I would need to take up reloading to make that a good choice and I simply cannot at this time.
__________________
NHI, 10-8.
|
05-13-2012, 01:28 PM
|
|
Member
|
|
|
Join Date: Apr 2006
Location: Colorado
Posts: 293
Likes: 2,311
Liked 1,252 Times in 191 Posts
|
|
Mine is not a true "Mountain Gun".....It started out as a 5" Model 625 in .45acp. I recently bought a 4" MG barrel from Midway and had that installed. It does not have the chamfered cylinder and the barrel does not have the MG name on it.
It is now an absolute joy to shoot and to carry.....
Last edited by mic214; 05-16-2012 at 01:12 PM.
|
The Following User Likes This Post:
|
|
05-13-2012, 03:07 PM
|
|
Member
|
|
|
Join Date: Mar 2012
Location: SW Washington State
Posts: 416
Likes: 99
Liked 780 Times in 168 Posts
|
|
Label aside, it's hard for me to swallow a small game round (.45 acp) as much of a mountain gun. Clean Break.
|
05-13-2012, 05:17 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2006
Location: North Gawja
Posts: 561
Likes: 204
Liked 159 Times in 59 Posts
|
|
Wow that looks great -- as in highly practical. The more I shoot .44 spl, the more I like it. What does your 396 Mountain Lite weigh? Isn't the cylinder titanium?
Clean Break[/QUOTE]
It's very light, and by far my favorite woods carry gun. Scandium frame and titanium cylinder. You don't even know it's on your belt.
Munster
__________________
GO NAVY!
|
05-13-2012, 05:21 PM
|
|
Member
|
|
|
Join Date: May 2008
Location: Washington State
Posts: 7,477
Likes: 14,598
Liked 9,314 Times in 3,723 Posts
|
|
Quote:
Originally Posted by Clean Break
Label aside, it's hard for me to swallow a small game round (.45 acp) as much of a mountain gun. Clean Break.
|
Properly loaded with a decent weight WC/SWC, or with certain JHPs, there is nothing in Washington that would be too big to use the .45 ACP on. With ball, of course it would be silly.
__________________
NHI, 10-8.
|
05-13-2012, 08:01 PM
|
|
Member
|
|
|
Join Date: Oct 2003
Location: Palmetto Upstate
Posts: 686
Likes: 100
Liked 90 Times in 42 Posts
|
|
.45 Colt
Old picture. It now wears the old-style cylinder release.
|
05-14-2012, 06:02 PM
|
Member
|
|
|
Join Date: Nov 2011
Location: DFW Texas
Posts: 269
Likes: 6
Liked 172 Times in 84 Posts
|
|
Quote:
Originally Posted by Dale53
My "Mountain Gun" is a 4" Model 624 (.44 Special). Of course, it is not cataloged as a Mountain Gun but it is to me...
Dale53
|
That's about as close as you are going to get to my 629-5
|
05-15-2012, 10:13 PM
|
Member
|
|
|
Join Date: Oct 2011
Posts: 26
Likes: 3
Liked 7 Times in 5 Posts
|
|
Wow, great responses!
Last edited by texasgreg; 05-15-2012 at 10:17 PM.
|
05-15-2012, 11:15 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,134
Likes: 10,420
Liked 6,949 Times in 2,356 Posts
|
|
I stumbled into a 629-2 that was owned by a good friend, he didn't care for it and rarely fired it. I asked him what he wanted which I think was less than what he paid for it new, I couldn't turn it down, especially since I had been looking for a replacement for my 29-2 I had traded off.
I did not care for the pachmeyer stocks, all they do for me is turn my hands black. Most .44 magnum Smiths put alot of pressure on the web of my hand, unlike Ruger single action .44s that have a nice roll at the muzzle. I got used to it with my 29-2 and target stocks made all the difference in the world. After a trip to the range and discovering the way this 4" .44 recoils with heavy magnum loads the first thing I did was get ahold of one of the great stock makers and ask if he could make me a set of square butt target stocks to fit a round butt frame, he made my day by telling me he would be glad to. The second thing I did was send the pistol off to Mag-na-port for a quad trapazoid port job which will take a good 20-25% off the felt recoil and should make it much more pleasant and accurate with full on magnum loads.
I was tempted awhile back when a guy was selling a 4" 625 with dies and alot of brass, bullets, etc. I wouldn't turn my nose up on a 625 in .45 LC, you can load that up for anything on the continent just like the .44, the nice thing about the .44 is downloading .44 special for "plinking", I love to shoot .44 plinker rounds.
|
05-16-2012, 11:43 AM
|
|
Member
|
|
|
Join Date: May 2005
Location: Montana
Posts: 934
Likes: 27
Liked 307 Times in 110 Posts
|
|
Here's mine:
I live in NW Montana, griz territory, and every August I spend a fair amount of time in the nearby mountains and foothills picking huckleberries. This is a bit of a load to carry, but not too bad in a hip holster on a very stout belt, and the weight is a certain form of comfort.
|
|
Tags
|
327, 357 magnum, 44 magnum, 624, 629, 657, 686, baughman, l frame, lock, m25, m29, model 19, model 24, model 25, model 27, model 29, model 624, model 686, mountain gun, n-frame, presentation, round butt, ruger, smith & wesson |
Posting Rules
|
|
|
|
|