Quote:
Originally Posted by BLUEDOT37
Here you go, from my previous posts on it.
Not likely to pierce them but may not be long enough either.
.
|
Morning BLUEDOT37
Thank you, I searched using a number of different key words & none showed up on your linked-to threads.
That pretty well answers my question on the Apex change, I still don't know the WHY but at least it looks like they sent me their current XP firing pin.
As to length, the firing pin I received has a length of .4965 but seems to have plenty of protrusion through the frame bushing when I push on the rear of the installed firing pin. (looks like way more than I will ever need)
I fired 12 empty (primed only) sized cases this morning & they all fired (I have 12 special cases that I drilled the primer flash holes out so the primers don't back out during empty case firing). I have 6 sorted .45 cases that have .002" primer seating depth & 6 .45 cases that have .013" primer seating depth.