|
|
04-05-2024, 08:58 PM
|
SWCA Member
|
|
|
Join Date: Dec 2006
Location: NW Florida
Posts: 2,235
Likes: 6,437
Liked 3,432 Times in 587 Posts
|
|
Hard SA Hammer Pullback on 32-20
I recently purchased a S&W model of 1905 in caliber 32-20, circa 1916. The more I play with it the harder the trigger pull in DA. I lubed it up with no improvement. I loosened up the strain screw with no help in SA. My next move is a 2 week soak in transoil and see where that takes me. The hammer seems really heard to pull back in SA. I'm use to a S&W with a silk action especially a gun of this vintage. Mainspring seems way to tight. Any suggestions?
|
04-06-2024, 02:04 AM
|
SWCA Member
|
|
|
Join Date: Jul 2017
Location: Arizona
Posts: 503
Likes: 387
Liked 2,316 Times in 395 Posts
|
|
Two thoughts:
Have you tried it with the cylinder open to isolate the moving parts?
Is the mainspring original? I ran into an issue with a replacement mainspring where the hooks were too long and would bind against the hammer as the action was cycled.
__________________
SWCA #3942 / SWHF #988
|
The Following 2 Users Like Post:
|
|
04-06-2024, 02:20 AM
|
|
Member
|
|
|
Join Date: Jul 2014
Location: Mojave Desert
Posts: 10,472
Likes: 18,216
Liked 24,608 Times in 6,939 Posts
|
|
Quote:
Originally Posted by Shotguncoach
Two thoughts:
Have you tried it with the cylinder open to isolate the moving parts?
Is the mainspring original? I ran into an issue with a replacement mainspring where the hooks were too long and would bind against the hammer as the action was cycled.
|
I second this hypothesis. Had that exact thing happen to me.
__________________
213th FBINA
|
The Following User Likes This Post:
|
|
04-06-2024, 09:39 AM
|
SWCA Member
|
|
|
Join Date: Dec 2006
Location: NW Florida
Posts: 2,235
Likes: 6,437
Liked 3,432 Times in 587 Posts
|
|
Mainspring
The mainspring does look new from what I can see of it. This very idea crossed my mind. I will go into my parts stash and locate a good used one and see if it changes the dynamics. I appreciate your response, will let you know what happens.
|
04-06-2024, 09:48 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 17,922
Likes: 7,914
Liked 26,024 Times in 8,773 Posts
|
|
Without a peek inside you are just guessing - on a 100+ year old gun! It would be prudent to see what is going on inside, see how dirty, gummed up and congealed the old oil is. If a proper cleaning and lube doesn't solve your issue at least you will be able to diagnose the problem. If you are not experienced in doing this, a LGS should be able to help.
Just guessing and throwing things at it won't really solve the problems. You really need to see what issues there are.
|
The Following 4 Users Like Post:
|
|
04-06-2024, 01:00 PM
|
|
Member
|
|
|
Join Date: Apr 2013
Location: Southern Utah
Posts: 1,789
Likes: 4,270
Liked 2,807 Times in 903 Posts
|
|
There are some good YouTube videos out there on how to dis-sassemble and re-assemble Smith & Wesson revolvers.
|
The Following User Likes This Post:
|
|
04-06-2024, 02:35 PM
|
SWCA Member
|
|
|
Join Date: Jul 2017
Location: Arizona
Posts: 503
Likes: 387
Liked 2,316 Times in 395 Posts
|
|
Quote:
Originally Posted by CH4
I second this hypothesis. Had that exact thing happen to me.
|
Here are a few pictures that may help with what to look for if the spring has been replaced. No guarantees until we get a look inside, but it's a place to start.
The first picture shows the difference between the hooks on an OE spring from an N-frame 2nd Model and a modern Wolff replacement. The second pictures shows the area of interference, the third picture shows the modified hooks after fitting the new spring.
__________________
SWCA #3942 / SWHF #988
|
The Following 4 Users Like Post:
|
|
04-06-2024, 02:58 PM
|
Member
|
|
|
Join Date: Aug 2018
Location: Los Angeles, CA
Posts: 636
Likes: 504
Liked 654 Times in 298 Posts
|
|
If the strain screw is too loose the mainspring claw will contact the back of the hammer.
__________________
Richard
|
The Following 5 Users Like Post:
|
|
04-07-2024, 08:08 PM
|
SWCA Member
|
|
|
Join Date: Dec 2006
Location: NW Florida
Posts: 2,235
Likes: 6,437
Liked 3,432 Times in 587 Posts
|
|
New Mainspring
I went thru my parts box and found two mainsprings. I took out the one in the gun and replaced it with one from the box and got about a 10% improvement. There was no sign of binding on or around the hook. The gun has soaked for about 4 days in transmission oil but it made little difference. It looks clean. SA is still a bit difficult, mostly stiff. Will keep working with it.
|
|
Posting Rules
|
|
|
|
|