Search results

245 grain hard cast SWFP (429-421) 24 grains of 2400 in .44 Mag. That'll knock down anything in the lower 48 if shot placement is right.

POOR OSU. Now they gotta wish they beat IU

I've been looking for a good Win M94 for the past couple of years. e Found one at my lgs. It is a late 60's/70's 1894 Antique models. I had one years ago. It was my favorite lever gun and regretted ever selling it. The Antique model had a case hardened reciever and etching for Gold...

CHA CHING!!!!

All I need 1 N frame target. I'll adopt him into my family! :)

We had a drought 15 years or so ago and were shooting into 3 row of semi tires filled with sand at 100 yds. That was our pistol/rifle range, If we wanted to shoot longer, we panned 20' to the right and had a 400 acre field to shoot at. We had a natural berm at 600 yds and limited our shooting...

You have 2 options: You have an authentic post WW2 mix master or You can chase all the original parts down and hope it raises the selling price But, remember, it was made to go bang. It will do it either way

Odds are the High Standard has no disconnect, so slam firing is possible. That's when you can hold the trigger down after a shot and jack the slide, causing the HS to fire without releasing the trigger. That is a definite keeper. Dump the rest and buy a Remington 870

Make sure the ejector rod hasn't backed out and is exerting pressure on the front stop. If it is, screw in the ejector rod counter clockwise to tighten it up. HTH

take a pic with the revolver model you have, ie: K/L or N. Have the grips mounted in the frame and we will be able to give you an answer.

I use racing fuel and or AV gas in my small gas motors since they have no alcohol. Run the carb dry and get the race gas or AV gas with Stabil added. Friends us this with bikes, 4 wheelers and sno mo's They all start easily when needed.

I've had all three versions of the Detective Spl's and I prefer the action of the Gen 2 to be the best. I also prefer the feel of the Gen 3 with the square butt grips over the overs. So if I could find a Gen 3 DS and a gun smith who can perform the Gen 2 trigger job on it, I would have the...

So can someone sell me on a Williams peep sight vs a Lyman Tang sight? Good of each vs bad of each

Been wanting a lever gun for awhile Picked up a Win M94 "Antique" post 64' 30-30. No wear, the case hardening had faded and the brass cartridge spring and the saddle ring had flaked off its brass plating. Stock is VG bluing perfect and a shiny bore to boot. It was there on consignment...

If you're worrying about the muzzle, just do the marble trick with a polishing paste, you could do the same to the bolt (without the marble) to make it shiny, but the machining would still lightly show through.

Why wasn't the 38 Spl called the .357 Minimum?

I think if we have to use Tinian and Peleiau we are SOL. I mean we only have 2 B29's flying, "Doc" and "Fifi"

Mine has walnut grips with the usual rampant Colt inlay.

Why do you think it's called " Crook " County?

Enlarge the pic with the statue. On the base is dated 1918. It's a WWI memorial.