Search results

Looks for one. Rigidity for another, especially if you're using open sights. Longer options. The 12.5" is what should have come on the rifle. Some people like having the front of the hand guard right up to the flash hider. Push button sockets with limited rotation.

Just put our name in the google and maybe add the standard commercial extension

They are good extractors, but most people want the best.

The barrel IS free floating. The plastic hand guard end cap is useless decoration that just pops right out. Hopefully there's not that kind of weight on a bipod.

The bolt rails are steel and usually need to be honed or run on a hard Arkansas stone to remove the burrs from manufacturing

There is only one manufacturer in the world that makes aluminum hand guards for the 15-22 that actually fit them perfectly. You can get the adapter and do some machining yourself, but the time it would take is a bit and the final product...well...depends on how good you are or how much you...

If you run sub-sonic, you need the correct recoil spring

And with sub-sonic it comes down to another level of sound. Need a sub-sonic recoil spring. Can't say where you can get them here.

Get the proper breech block wrench

The ejector has been addressed The extractor is the other culprit. Get this to fix that issue - S&W M&P15-22 Extractor Set (3 Pieces) | Tacticool22 Another problem is if you have a "Bad-***" lever on the release paddle. Some of them are too heavy. The firing pin is "supposed" to stop before it...

Just push the rim end straight down. When it gets below the feed lips, rotate the round to point forward. Super easy and fast

You can only get as close as the front of the takedown lug

15-22 manual | Tacticool22

With the standard "manual of Arms" when the hammer is down on an AR trigger, you can not put it on safe

I wish. But it would take a whole redesign. They could do .17 Mach 2 real easy with just a barrel change

The pistol needs a breech block wrench S&W M&P15-22 Breech Block Wrench | Tacticool22

The 15-22 any day

1/2-28 threads

Send it in. The worst they will do is charge you for a new lower. They may be able to do some paperwork about the serial number so you don't have to do a new 4473

Believe it or not, the rimfire needs a stronger hammer spring. Headspace is machined into the face of the bolt. Could you post different pics? The originals aren't showing up.