Search results

I've only had this pistol a few weeks & put 350 rounds through it without a single malfunction. Cleaned it last night & after I was done, I pushed down on the striker block & it stuck down in the slide. I'm thinking either a piece of nylon bristle broke off the brush or I brushed a tiny piece of...

I just picked up a geissele airborne charging handle on sale from my local gun shop. Im looking for answers from those that have this particular charging handle or the Super (SCH) model. New out of the package there is about 1mm of play in the direction of pull on the right, non latch side...

Im thinking about retiring my Samson Evolution rail in favor of an M Lok handguard system. I installed the Samson myself after cutting my factory fsb down into just a low profile gas block. The Samson Evo uses a bushing around the factory barrel nut so I was able to install the handguard...

What are the sight dimensions of the m&p 2.0 9mm with the 5 inch barrel? The standard factory white 3 dots, front sight height & width? Rear sight height & notch size? Cant find the specs on S&Ws website product page

I purchased an m&p 2.0 9mm with the 5 inch barrel on Friday & put 300 rounds through it today without a problem. Im really liking it. I also have a gen 1 FS m&p 45 & a 9mm Shield, both without safeties. I think S&W shouldve made/released the 5 inch 2.0 without the safety at the same time as the...

Looking for some feedback from those using a national match size or other upgraded front pivot pin. My m&p15x is getting up there in age, I want to say it's 6 or 7 years old now, has fired thousands of rounds & the upper & lower receivers have been seperated for cleaning & miscellaneous reasons...

While I was shooting at the range today I had already cycled through 50 rounds of 62 grain American Eagle ammo without a problem. Then I started shooting Fiocchi 55 grain FMJ & on my 18th round the rifle went CLICK instead of Bang. I dropped the magazine & pulled the CH to extract the round...

I've been looking online for a blade tech total eclipse holster for my FS 4.5 inch barrel m&p 45. I'm trying to order from a vendor that has it in stock to cut any wait time. All I can find in the Total Eclipse model says it's for 22, 9, 40, &45. Is this correct? This 1 holster will...

I ve done a few Google searches changing the wording of my question a few times & keep getting the same results. Out of all the searches I only went 4-5 pages in before I gave up. Most of the results came up with converting a shield 40 to 9mm. I'm looking to see if it's possible to use the...

I bought the rifle new over 5 years ago, take very good care of it, clean throughly & keep it well lubed. My last range trip I shot 200 rounds of 62 grain green tip & didn't have a hint of a problem. The round count of the gun is about 6000 rounds,+ or - a few. Where should I look 1st? The gun...

I M INTERESTED IN HAND LOADING 45ACP & 223/556, IS IT WORTH IT FOR ME, WHERE TO START I just watched a youtube video of a guy using a Lee reloading kit for 45acp that involved nothing complex, just doing things in the correct order with the correct supplied tool(s). Seemed simple enough for a...

Yes that's what I am asking, NOT full size sights on a shield. I know that the full size rear is wider but what about the rear notch size on ameriglo operators, same notch for FS & shield? How much narrower are shield rear sights compared to a FS? The reason I'm asking is my local gun shop has...

The main thing I'm interested in is what is your POI compared to POA? I have found out that the trijicon HDs are taller than the standard m&p sights, I already get low impacts from my fullsize m&p45, that is well used so breaking in & trigger control are not the issue. I'm worried the taller...

I'm trying to narrow down my decision on a set of night sights for my full size m&p 45. 1 set on my list are the truglo tfo's. After looking at them at my local gun shop I could actually see how long the front sight is. This obviously makes the sight radius shorter, which most say is a bad...

Does the factory flat recoil spring fit over an aftermarket steel guide rod? I haven't had any problems with my wolf recoil spring & rod, but when I was cleaning my sigma 40 last night it appeared that the recoil spring is slightly bent. After thinking about it a while, I am thinking this ever...

Which do you prefer? I have a full size 45 that came with painted dots, which I repaint every so often using my own special mix of glow paint & super white automotive paint. My mix works pretty well but only last about 2 cleaning cycles before I have to touch them up. I stopped in the gun shop...

Ever since I bought my m&p fs 45 I havent touched my sigma 40. I let my little brother use it everytime he goes to the range with me & he put the last 200 or so rounds thru it with maybe 3 failures. To get a tight group under rapid fire is a chore so when I brought it out for cleaning I decided...

I know that my rifle is a overgassed a good bit & have been looking at reliable solutions to this. I came across the les baer carbine length gas tube, the description states the vent hole size is OPTIMIZED for carbine length gas systems. I cant find any reviews on it to see if it reduces the gas...

I just received my ranier arms xtc yesterday, i soaked just the muzzle up to the end off the threads in hoppes #9 overnight. Got up this morning & put the barrel in my vise which has a polymer pipe clamping attachment that fits the barrel perfectly. Tightened up the vise & tried to remove the...

The store was about to close & i had been talking to the salesman in the sporting goods dept for a few minutes. We actually shot in lanes next to each other yesterday at the outdoor range, he had pulled a box of hornady critical duty 220grain 45 auto +p & set it on the counter. Well i looked at...