Search results

Here is a pic with the plunger in the stuck position

WTH?! So weird. Manually racking the slide & dry firing, with the plunger still stuck up inside the slide, the trigger feels completely normal. Take up, break & reset. After doing this 10x I looked at the plunger & it was still stuck up in the slide. Then I used the slide stop to hold the slide...

Yeah there is definitely something wrong the safety plunger. My 5inch 2.0 doesn't get stuck flush with slide when I push it in. It does get stuck partially depressed & as soon as I pull the striker back the plunger pops out. When I pull the striker back on my compact 2.0, the plunger remains...

Is the striker blocker plunger supposed to get stuck if you push it in as far it will go? I can push it in until it's flush with the slide, but push a little more & clicks, & is locked down. I removed the striker assembly, popped the plunger back up, put the striker assembly back in, re...

I've only had this pistol a few weeks & put 350 rounds through it without a single malfunction. Cleaned it last night & after I was done, I pushed down on the striker block & it stuck down in the slide. I'm thinking either a piece of nylon bristle broke off the brush or I brushed a tiny piece of...

Nevermind. I figured out what is jingling around in the charging handle. It is the latch hook itself. The latch hook kinda floats in the lever/tab.

I just picked up a geissele airborne charging handle on sale from my local gun shop. Im looking for answers from those that have this particular charging handle or the Super (SCH) model. New out of the package there is about 1mm of play in the direction of pull on the right, non latch side...

I appreciate it, thanks for the help!

Im thinking about retiring my Samson Evolution rail in favor of an M Lok handguard system. I installed the Samson myself after cutting my factory fsb down into just a low profile gas block. The Samson Evo uses a bushing around the factory barrel nut so I was able to install the handguard...

I have the model m&p15x that I bought new back in 2009. Its has been & still is a great rifle. I would go ahead & replace the buffer spring, its cheap & should be done every 3-5k rounds. With the carbine length gas system you can put a heavier buffer in also. I just switched my H buffer out for...

I love my shield 9mm, other than a light stippling job & fluorescent green painted front sight dot its bone stock. I have approximately 8-900 rounds through it. As a defensive carry gun, I think the trigger feels great right now & I am able to shoot it very accurately. I bought the 5 inch 2.0...

What are the sight dimensions of the m&p 2.0 9mm with the 5 inch barrel? The standard factory white 3 dots, front sight height & width? Rear sight height & notch size? Cant find the specs on S&Ws website product page

Use the slingshot method. Its easier & is how the gun is intended to be operated. When you use the slide stop as a slide release there is a chance the round being picked up out of the magazine will not go into full battery. The slide will carry more momentum using the slingshot method

Probably the combination a tight recoil spring & it being a long slide 5 inch barrel. I just bought the 5 inch 9mm last Friday & after I cleaned it I left the slude locked back, so it was compressing the spring, until I went to the range on Sunday. I shot 300 rounds with 0 malfunctions. The 1st...

I purchased an m&p 2.0 9mm with the 5 inch barrel on Friday & put 300 rounds through it today without a problem. Im really liking it. I also have a gen 1 FS m&p 45 & a 9mm Shield, both without safeties. I think S&W shouldve made/released the 5 inch 2.0 without the safety at the same time as the...

My concern with using the accuwedge is just that, I don't want to accelerate more wear on the reciever pins & pin holes. It may just be my pins are worn out of spec & just replacing them with a new set may alleviate most of the play. I'm not trying to achieve increased accuracy, just want the...

Looking for some feedback from those using a national match size or other upgraded front pivot pin. My m&p15x is getting up there in age, I want to say it's 6 or 7 years old now, has fired thousands of rounds & the upper & lower receivers have been seperated for cleaning & miscellaneous reasons...

Wow! Those pics look terrible when I view them on my phone. Maybe better on a PC, but viewing them on my phone, I can barely make out what the pic is

Ok I took some pics of the bullet itself in my digital caliper. The digital caliper is a cheap harbor freight & when I upload pics that are crystal clear on my phone, the thumbnails attached to the post look like ****, so take it for its worth. I placed the bullet on the counter top so it would...

Thanks for the explanation. Appreciate it