Search results

I had my compliant barrel chopped to 16.25" and threaded. Installed a saker trifecta brake on it. Mine was the camo hunting model. I swapped out the fixed stock for a bcm m4 buffer tube, noveske qd end plate and added a od ctr. I run a kit from heavybuffers.com in it for the spring and buffer...

I would be interested as well. I have gotten to really like the ambi bolt catch on this rifle and wish I could find just a factory upper to build. Might go with a second rifle but the barrel would be swapped either way

I am just starting the process for a saker. I got my heavy barrel chopped to 16" and added a tricecta brake. I like that it is full auto and magnum rated. Will also be using it on a remington 700 aac-SD model and eventually a 300 blackout sbr.

I am currently torn between the MI mlok 12" or a 14" mlok from SLR... kind of hoping they make their 14" solo lite following the recent add of the 15" solo lite... if not I may go with the MI mlok 12". I bought my rifle as the hunting model and the previous owner has a 15" troy alpha installed...

I used a 6-25x millett last deer season and it was way too much magnification on my 75 yard shot. I had it turned down to 6x and it was difficult to find her in the trees with that kind of magnification. When I got on target it was clear and the shot was easy but as others have said it is too...

Thank you.

Has anyone tried to fit any other complete upper on the smith lower? Curious if there are other options out there to get multiple uppers for my gun... I've only been able to fund one thread that said his neighbors dpms upper wouldn't fit but he didn't press the issue enough to know why. I'm...

Anyone done a BHW barrel replacement yet? How would you also test the bolt for strength after a barrel split? There is one not far from me for a decent price with a split barrel... Might have to get it as a spare

I have a rifle with a factory moe a2 stock on it and wanted to go to a collapsing stock. Has anyone personally used the vltor a5 extension tube with a factory buffer and spring? Does anyone know if factory replacement parts are available from smith since I have read alot of them are not. If...

This seems like a great start to have one in 6.5 Creedmoor or a 338 federal as stated above. I love a 308 but options are nice

Reloading is really only cheap enough if you already have the brass to reload. Even with once fired brass purchased, the cost per round soesnt seem economical enough unless you are doing precision loads. I have a bunch of the zqi and I shoot it ok. I haven't tried to group it but it's combat...

My ubr measures 6.92" internally. That said, does anyone know where to get a factory s&w carbine buffer tube, receiver plate and new spring? I still have my original buffer and spacer but did cut the spring thinking that was the issue when it is not. I have set my mind to ditching the ubr...

The ubr is a stock from magpul. Not a barrel...

Had debated trimming the bumper on the buffer but I would almost need it flush with the metal to work reliably in my mind. Also thinking about trying an ar15 h3 buffer as its a tenth of an inch shorter and then I could trim the bumper if need be as well. That said, I haven't gotten a response...

Ok so I went for it and just measured the buffer tubes side by side and it seems like the ubr tube was just right about the same length shorter as the included spacer was so I threw it together. Turns out the buffer and bcg combo was much too long and the buffer was hanging up in the stock as...

That's where my confusion lies again. If I take the bcg out of the upper and push it in the buffer tube it goes all the way back and clears the bolt catch. If I keep the bcg in the upper with no buffer or spring, the charging handle will come back far enough to get the bcg to clear the bolt...

RE? Not sure what you mean on that part... The spring and buffer work independently as well as the charging handle and bcg but has issues when assembled together. That's what's confusing me right now

That's why I got the kit from heavybuffers.com. it's designed for use in 308s with a standard carbine tube.

I have an m&p10 that started life as a hunting model with the camo moe a2 stock and a bull barrel. I ran across the ubr and installed it and then had issues with the factory buffer and spring not coming back far enough to strip a round from the mag. Ordered a heavybuffer.com kit with a 308...

I have the hunting model with the bull barrel and the magpul a2 style stock... I am getting a ubr for it but am unsure what differences I will need to make. I pulled the buffer and spring and it seems to be a carbine setup with a plastic spacer. When I tried to remove the stock, the buffer tube...