M&P 15-22 Picture Thread

full_time_soldier · #**2451** 02-12-2012, 01:05 PM

not done with it yet got some parts coming but here it is so far.

Bharrington21 · #**2452** 02-12-2012, 10:45 PM

Finally finish purchasing the stuff I wanted from CTD for my 15-22. Here is the finished product. Havent been out to range since I got all the new stuff on it since its been so cold but cant wait.

1911brian · #**2453** 02-12-2012, 11:17 PM

[IMG]

[/IMG]

c7aea · #**2454** 02-14-2012, 10:36 PM

Here is mine!

Chowser · #**2455** 02-15-2012, 01:03 AM

my dealer couldn't find the fde moe in stock cheap anywhere so i ended up getting the basic one.

not bad for less than 4 benjamins.

i've got some spare fde magpul stuff sitting around for a .300blk build i'll never get to, so i'll put them on the s&w for now.

Meeker · #**2456** 02-15-2012, 02:09 AM

Dude yours came with a loaded mag! nice upgrade!

bmcashwell · #**2457** 02-15-2012, 08:51 PM

work in process, what you think?

BillyJack2012 · #**2458** 02-15-2012, 10:50 PM

Quote:

Originally Posted by bmcashwell

work in process, what you think?

Really like what you've done with this.

mud king · #**2459** 02-16-2012, 12:10 AM

Quote:

Originally Posted by bmcashwell

work in process, what you think?

What scope do you have on there?

tracksol · #**2460** 02-16-2012, 01:07 AM

Here's my new and unfired 15-22 next to my 5.56 AR. I plan on doing the handguard conversion to make it a clone of my 5.56 for training.

shawnfergie · #**2461** 02-16-2012, 03:23 AM

Quote:

Originally Posted by bmcashwell

work in process, what you think?

How do you remove the rear pin seen in that last pic?

tracksol · #**2462** 02-16-2012, 10:30 AM

Quote:

Originally Posted by shawnfergie

How do you remove the rear pin seen in that last pic?

You have to take off the grip. That will allow the take down pin spring and detent and the safety selector spring and detent to be removed. Then you can take take down pin out.

bmcashwell · #**2463** 02-17-2012, 12:15 AM

the rear take down pin? Remove the grip and the retaining pin and spring will come out. Usually located under the floor plate of an .223

bmcashwell · #**2464** 02-17-2012, 12:17 AM

Barska 1x30 red dot and matching 3x30 magnifier. Gander Mtn. $99

bmcashwell · #**2465** 02-17-2012, 12:24 AM

Quote:

Originally Posted by BillyJack2012

Really like what you've done with this.

All the paint( rails, grip, charging handle, stock), color on lower receiver, flush mount push button for single point sling and sling. 10 rd clip pin removed for 25rd capability. Optics with magnifier. Forward grip 5 position. Laser with pressure switch. and just got flash light with pressure switch and 45 degree mount. Barrel adapter for 1/2 28 tpi threads, and compensator.

xjnewbi · #**2466** 02-17-2012, 10:15 PM

Hey bmcashwell, does that magnifier work well with the the red dot? It looks like the magnifier may need a small riser (most noticeable in your first pic)

bmcashwell · #**2467** 02-17-2012, 11:17 PM

Quote:

Originally Posted by xjnewbi

Hey bmcashwell, does that magnifier work well with the the red dot? It looks like the magnifier may need a small riser (most noticeable in your first pic)

the magnifier, looks like it sits a little low actually. I have since changed the mount to a cantilever style mount with the same elevation. However it works well and this is how it is designed. The scope has a hard mount, and cannot be altered to my knowledge.

full_time_soldier · #**2468** 02-18-2012, 12:41 AM

here is my completed project 15-22

Havetahunt · #**2469** 02-18-2012, 03:56 PM

Mine got some sun yesterday.

Havetahunt · #**2470** 02-18-2012, 04:27 PM

Another Pic.... Next week she will have cosmetic surgery, getting a FDE MOE "butt job"!

swood0580 · #**2471** 02-18-2012, 05:27 PM

my current build

ryhanus · #**2472** 02-19-2012, 12:41 AM

current set up... for the time being

YOSHIBESTO · #**2473** 02-19-2012, 02:36 AM

went out and bought a 3-4" riser and a dual magazine clip.

Incredible Me · #**2474** 02-19-2012, 07:57 AM

My stock finally came in (took 5 weeks)

Pretty happy with it

Rambo101 · #**2475** 02-19-2012, 08:49 AM

Quote:

Originally Posted by Havetahunt

Mine got some sun yesterday.

Nice looking can you have on your barrel. I really like the look with the holes. If you don't mind me asking, where did you get it from?

koledani21 · #**2476** 02-19-2012, 11:21 PM

This rifle is the shizznit.

TRUST8383 · #**2477** 02-20-2012, 12:14 AM

Quote:

Originally Posted by Incredible Me

My stock finally came in (took 5 weeks)

Pretty happy with it

Sweet rifle you got there! Kinda reminds me of a MK18 MOD 0.

ECLIPZD95 · #**2478** 02-20-2012, 08:56 AM

Added a Primary Arms 3x Magnifier and Magpul BAD Lever

DZH · #**2479** 02-20-2012, 10:52 AM

Quote:

Originally Posted by ECLIPZD95

Added a Primary Arms 3x Magnifier and Magpul BAD Lever

Can you use you 3X set up the way you have it in pic?
I found I had to move my 3X as far back as I could. Had to move the rear sight. I have not shoot with this set up yet.

Zack
Using Tapatalk

ECLIPZD95 · #**2480** 02-20-2012, 01:25 PM

I went to the range yesterday and had no problems shooting with my current setup. The red dot reticule was crisp and the magnifier focus on the target was very clear.

What kind of problems are you having?

CharlieBrown · #**2481** 02-20-2012, 01:57 PM

Went to the range today for the first time with my MOE. LOVED IT! 150 rounds of mixed ammo to see what works the best, all of it ran fine, with only one ftf. I'm extremely happy with the gun. What a blast to shoot. I will post pictures soon.

Bork.it.consulting · #**2482** 02-20-2012, 07:19 PM

This is my "new" setup. I just got the Barska red dot with a 3x magnifier from Gander Mountain. It was on sale for 99.99. I thought it was a decent price and am surprised how comparable it is to some of our other sights. I just need to get a flip to side mount for the magnifier. Anyone know where I can get one cheap?

At the bottom is my target at 25 yards with 50 rounds. This was after about ten shots to sight it in.

shawnr5 · #**2483** 02-20-2012, 09:18 PM

Here's my 15-22 with a VLTOR CASV-ELG forend and a modified Magpul mvg mounted. I still have to pick up a low mount for my Strikefire so I can mount it.

BillyJack2012 · #**2484** 02-21-2012, 08:52 AM

Quote:

Originally Posted by shawnr5

Here's my 15-22 with a VLTOR CASV-ELG forend and a modified Magpul mvg mounted. I still have to pick up a low mount for my Strikefire so I can mount it.

Wow.......

mud king · #**2485** 02-21-2012, 11:00 AM

Quote:

Originally Posted by jtiggidy

Magpul MBUS
Magpul MOE stock
NcStar 4x9 Rubberized tactical scope /w laser & quick release
Hogue grip
Mako AG-44S Foregrip
Ultrafire wf-502b flashlight /w random amazon rail mount

I want to really like the NcStar scope and I do for the most part but it is not exceptionally clear and has some barrel distortion. It is sufficient for the most part but lacks focus control and image quality of higher end scopes. I also have a Nikon Rimfire BDC 3-9 that I REALLY LOVE but I dont like my current mounting scenario for it.

Anyone know of a good mount for the Nikon BDC that would allow for clean access to the charging handle without being a ultra high mount but still leaving enough room to leave the MBUS sights in place??

I went on Ebay and got a 1" aircraft aluminum riser for $20. I will be mounting the riser in front of the MBIUS then mounting the scope to the riser as far back as I can for easier eye relief. The scope that I have is a 3-9X40

QuestSHP · #**2486** 02-21-2012, 03:34 PM

Finally picked her up today.
15-22 MOE FDE
Barska "ACOG" red dot
NcStar Green Laser
Magpul Rail Covers
TangoDown Front Grip in FDE

Majorlk · #**2487** 02-21-2012, 03:37 PM

QuestSHP:

Have you had any problems with your Barska? After about 300 rounds, mine developed crosshair "ghosts". I haven't had a chance to talk to Barska about it yet.

shawnr5 · #**2488** 02-21-2012, 04:54 PM

Okay, I think I'll run it like this until I decide to SBR it.

1st gen 15-22 (DTH6...) threaded barrel, JP reduced power yellow springs, Magpul ACS, rear MBUS, MVG, Young Manufacturing flash hider, Hogue overmolded grip, Tacticool22 Free Float adapter, Delta Ring Assembly, VLTOR CASV-ELG handguard, Trueshot Technology A2 Front Sight Base, UTG QD med height ring, Vortex Strikefire red/green dot and Uncle Mike's sling swivel cups.

Incredible Me · #**2489** 02-21-2012, 05:06 PM

where did you get that flashhider? I want it too

shawnr5 · #**2490** 02-21-2012, 05:24 PM

I got it at a local gun shop. I really wanted another Smith Vortex, but this was the closest that the gun shop had. I might have to go into town to Smith's facility and pick up the Vortex so my AR and 15-22 match.

nathantc · #**2491** 02-21-2012, 07:39 PM

4x sport view scope is a temp set up till i can spend money again,,, may also switch to a grip pod,,,, love the trigger its staying

got to hold a both other versions today as well,, this one weighs more and its noticible.

yes that crayola

perfectcircle1 · #**2492** 02-21-2012, 07:47 PM

Quote:

Originally Posted by Bork.it.consulting

This is my "new" setup. I just got the Barska red dot with a 3x magnifier from Gander Mountain. It was on sale for 99.99. I thought it was a decent price and am surprised how comparable it is to some of our other sights. I just need to get a flip to side mount for the magnifier. Anyone know where I can get one cheap?

At the bottom is my target at 25 yards with 50 rounds. This was after about ten shots to sight it in.

Can i come over and play monopoly with you?

wsor1264 · #**2493** 02-21-2012, 08:34 PM

103_0181.jpg

103_0184.jpg

103_0185.jpg

103_0186.jpg

Stillsearchin' · #**2494** 02-21-2012, 09:27 PM

Details on that flash hider?
I have that same Bushnell Trophy on mine. I haven't seen where too many people are using that one.

Majorlk · #**2495** 02-21-2012, 09:29 PM

Quote:

Originally Posted by Stillsearchin'

Details on that flash hider?
I have that same Bushnell Trophy on mine. I haven't seen where too many people are using that one.

TRUE SHOT TECHNOLOGIES SMITH WESSON 1522

crracer_712 · #**2496** 02-21-2012, 10:01 PM

My 811033 on the left, bought April of last year. My new today, 811035 MOE in the middle. And, my M&P15a, bought about a month ago

mud king · #**2497** 02-21-2012, 10:09 PM

Quote:

Originally Posted by shawnr5

I'm really liking that handguard you got there.

shawnr5 · #**2498** 02-21-2012, 10:27 PM

I have to take it to the range this weekend, but I'm liking it more and more, myself. Not enough to pay retail for it, but a lot.

jrod29 · #**2499** 02-21-2012, 11:17 PM

This is what my 15-22 currently looks like. Its gone through several thousand rounds already with no problems. Awesome gun! I'll eventually add a PA magnifier behind the micro dot. We'll see what else I want to do with it in the future. The options are limitless!

Brian_P · #**2500** 02-22-2012, 10:32 PM

So my baby just got back from the nice folks at S&W today, and I had to treat her right with some new goodies.