|
|
|
03-25-2010, 09:12 AM
|
Member
|
|
|
Join Date: Mar 2007
Posts: 30
Likes: 5
Liked 2 Times in 2 Posts
|
|
Latest Serial numbers on 15-22
I saw that Davidsons had gotten in a new batch of 15-22's, so I contacted them and asked if they could give me the three letters of the serial numbers. I had them check the models that I am interested in...the threaded barrel model, the unthreaded model and the Talo model. They have an approximate total of 224 rifles available as of now. The serial numbers are DTU****, DTX****, DTZ***, and the latest one "DUA". I have not seen a DUA reported here, so I believe that DUA should be the most current model, and IF S&W has started to produce "latest spec" models , then a DUA gun may have all the fixes incorporated in them. Several if's and assumptions here I know. I also know that at one point S&W said that one could not predict whether or not a rifle would have problems by the serial numbers, but that may not be true now.
I am going to run by my local gun store- tried to go yesterday but got tied up-and see if they have gotten any new stock in with the DUA numbers. If not, and if I decide to buy one now, I'll have them send me the DUA with the highest number. I think one can request this, or at least I know it has been done in the past.
Interesting fact that I turned up with all my poking around here: This is of course taken only from this forum. As far as I can tell from searches on the posts here, S&W 15-22's have the following letter prefixes:
DSZ, DTA, DTB, DTD, DTE, DTH, DTM, DTX, DTU, DTZ, and now DUA. There may be some others, but these are what my search turned up- although I swear that I remember seeing a DTY and a DTW, but maybe I just lost another brain cell.
If we use just the ten prefixes I found, and assuming that the numeric range in each prefix is 0001 through 9999, and not counting the new DUA's, S&W has made at least a hundred thousand 15-22's. That estimate is probably low, since we usually get posts here from those with problems, and everyone doesn't have problems, so a prefix different than the ones I use here could be out there somewhere. If one counted the number of failures reported in this forum the percentage of failures of the numbers made has to be very small. It would be real interesting to know if the number of failures is going down.
|
The Following User Likes This Post:
|
|
03-25-2010, 10:40 AM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Cleveland, Ohio
Posts: 1,406
Likes: 0
Liked 58 Times in 46 Posts
|
|
Quote:
DSZ, DTA, DTB, DTD, DTE, DTH, DTM, DTX, DTU, DTZ, and DUA.
|
Glad someone is paying attention!
There does seem to be a gap between DTM and DTX. At least as reported here. DTX is a very common serial in postings and all seem to be only a couple months since purchase.
-- Chuck
|
The Following User Likes This Post:
|
|
03-25-2010, 10:59 AM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: NoDak
Posts: 99
Likes: 0
Liked 0 Times in 0 Posts
|
|
Bought me a DTX7... last week
Goin back in to Smitty for missing extractor and numerous FTE's and FTF's
My Dealer had ordered one for me a week before purchase from Smitty
|
03-25-2010, 10:21 PM
|
|
Member
|
|
|
Join Date: Jun 2004
Location: Tustin, CA. "The OC"
Posts: 79
Likes: 0
Liked 1 Time in 1 Post
|
|
I just picked up S/N is DTX02**. I see from another thread that the DTX serial numbers are the newest out.
I have not fired it as of yet.
Of course, with all my research before I purchased this weapon, I had not heard of one issue, until I can to the S&W forum, D'oh! I should have checked here first I guess. Hopefully mine will be OK.
Last edited by ledman; 03-25-2010 at 10:27 PM.
|
03-26-2010, 05:55 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by ledman
I just picked up S/N is DTX02**. I see from another thread that the DTX serial numbers are the newest out.
I have not fired it as of yet.
Of course, with all my research before I purchased this weapon, I had not heard of one issue, until I can to the S&W forum, D'oh! I should have checked here first I guess. Hopefully mine will be OK.
|
I purchase a SKU811033 model this afternoon. It is a DTZ1.
|
03-26-2010, 07:00 PM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: Republik of Kalifornia
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by ledman
I just picked up S/N is DTX02**. I see from another thread that the DTX serial numbers are the newest out.
I have not fired it as of yet.
Of course, with all my research before I purchased this weapon, I had not heard of one issue, until I can to the S&W forum, D'oh! I should have checked here first I guess. Hopefully mine will be OK.
|
I think you'll be just fine
I just put another 525 rounds of CCI Blazer (Value Pack) 40g, high velocity, through my DTX1xxx and zero issues. I'm also using 5 previous version mags (modded for 10 round capacity), zero feed issues or any snags...this gun is very accurate and fun to shoot.
So that's 1000 rounds and 1 FTEject, I'm still a very happy camper! And knowing that if it starts acting up, I can send it back to S&W for revampment is a comforting feeling
|
03-26-2010, 07:21 PM
|
Member
|
|
|
Join Date: Oct 2008
Posts: 21
Likes: 0
Liked 0 Times in 0 Posts
|
|
ser #
I just bought a DTX3*** 13 days ago in Ca. My magazine has a blue lip not red. What's up if anything with the color?
Last edited by mikengracie; 03-26-2010 at 07:24 PM.
|
04-03-2010, 12:22 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: Montana(No Vacancy)
Posts: 425
Likes: 0
Liked 4 Times in 4 Posts
|
|
Quote:
Originally Posted by mikengracie
I just bought a DTX3*** 13 days ago in Ca. My magazine has a blue lip not red. What's up if anything with the color?
|
Some one else can give more sureness but I believe the 10rd mags come w/ blue follower and 25 rd mags w/ red.
|
04-04-2010, 10:23 AM
|
|
Member
|
|
|
Join Date: Mar 2010
Posts: 19
Likes: 0
Liked 0 Times in 0 Posts
|
|
I picked up mine three weeks ago. Serial Number DTX9xxx. It has the blue springs and the updated manual
|
04-22-2010, 10:16 AM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 7
Likes: 0
Liked 1 Time in 1 Post
|
|
Mine is a DTE and I have had absolutely no problems with it. I have fired about 1500 rounds through it consisting of about 7different brands, including some hollow points, and even a bag of about 200, 10 year plus old ammo that I do not know the brand of it. I am very happy with it. I think a lot of the problems people have is due to improper loading of the shells in the magazines. Several people have written about this. Also, I have yet to clean it and still no problems with firing or accuracy.
|
The Following User Likes This Post:
|
|
08-26-2010, 03:49 PM
|
Member
|
|
|
Join Date: Jun 2010
Location: CA LAKE TAHOE
Posts: 18
Likes: 1
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by BeginingOfTheEnd
Some one else can give more sureness but I believe the 10rd mags come w/ blue follower and 25 rd mags w/ red.
|
i just got sn DTX in CA w/a pinned 25 style mag [25/10 or 10/25?]. it was blue.
|
03-26-2010, 08:21 PM
|
|
Member
|
|
|
Join Date: Jun 2004
Location: Tustin, CA. "The OC"
Posts: 79
Likes: 0
Liked 1 Time in 1 Post
|
|
Quote:
Originally Posted by JackBauer
I think you'll be just fine
I just put another 525 rounds of CCI Blazer (Value Pack) 40g, high velocity, through my DTX1xxx and zero issues. I'm also using 5 previous version mags (modded for 10 round capacity), zero feed issues or any snags...this gun is very accurate and fun to shoot.
So that's 1000 rounds and 1 Ft-eject, I'm still a very happy camper! And knowing that if it starts acting up, I can send it back to S&W for revamping is a comforting feeling
|
Jack, thanks for the reassuring words! I am just nervous now that I got this rifle, after much convincing the wife I "needed" it, not just wanted it ,lol, and if it has problems, well, I will have to try and explain to her why a $460 rifle has to be sent back to the mfg for repairs.
Your S/N is a little lower than mine, when did you pick up your rifle? Do you have the red star stamp on your manual? I have heard of these "Blue Springs" but I see nothing like that on my rifle...
|
03-26-2010, 09:22 PM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: Republik of Kalifornia
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
|
I bought mine from BudsGunShop.com and got it toward the end of February (I want to say around the 25th or so?).
My owner's manual has a Blue star stamped on the back cover. If you look toward the lower righthand corner (on the back of the manual below the S&W address), there should be a revision number.
Mine says: REV:MP15-22_121709. I "think" this indicates the revision date for this particular manual which I interpret as being on/about 12/17/09. So I think it's pretty current. And my manual has TWO pages discussing recommended ammo (I've never seen any gun manufacturer go to such length regarding different brands of ammo).
And yeah I was worried about having to send mine back for repairs too but so far, I've been lucky I guess. Mine does not have Blue springs but the extractor seems to be an updated version (there's another thread that discusses this and the OP posted actual pictures of the older extractor vs. the revised one). Some VERY thoughtful guys/gals on this forum
I put 525 rounds through it this past Monday and experienced 1 FTE (toward the very end of my shooting period and the chamber/extractor appeared to be dirty). And today I put another 525 rounds through it and zero issues. I cleaned it very thoroughly in between these two sessions and I think if you keep everything clean (and use lubrication sparingly), load each magazine properly, and stick to quality high velocity .22LR ammo you'll be ok
Oh, your wife is going to LOVE shooting this gun (my girlfriend had a "blast" shooting it!)
Last edited by JackBauer; 03-26-2010 at 09:25 PM.
|
03-27-2010, 11:28 PM
|
|
Member
|
|
|
Join Date: Jan 2006
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
New DTU69XX
Just bought mine yesterday and have not had a chance to fire it yet. But, like many of you, finding the education I get reading these posts very helpful! According to the speculation here, my manual is from 06/09, but the rifle itself is from DTU era. We'l see what she does. I've have a pretty hefty quantity of 22 ammo so I'll get a chance to experiment right away. Here's hoping for the best!
|
04-15-2010, 10:05 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Texas
Posts: 80
Likes: 0
Liked 5 Times in 4 Posts
|
|
Latest serial numbers
I just ordered my M&P 15-22 from Davidsons on wed.morning , should have tomorrow . Email I recieved from them states that it is a DUA serial number.
|
04-26-2011, 09:43 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Houston
Posts: 268
Likes: 3
Liked 17 Times in 14 Posts
|
|
my 15-22 has DVP as the serial. so i think those are the newest, but also i have the new performance center 15-22.
|
03-25-2010, 10:53 PM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 7
Likes: 0
Liked 1 Time in 1 Post
|
|
I have a DTX1 put about 200 rounds through it without a problem. Used CCI standard velocity
|
03-26-2010, 10:18 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Cleveland, Ohio
Posts: 1,406
Likes: 0
Liked 58 Times in 46 Posts
|
|
Mine has a Blue Star but is revision 062209.
Only discussion of ammo is "use .22LR ammo." Glad I read that before I tried to stuff 5.56mm NATO in the little critter.
-- Chuck
|
03-26-2010, 10:29 PM
|
|
Member
|
|
|
Join Date: Jun 2004
Location: Tustin, CA. "The OC"
Posts: 79
Likes: 0
Liked 1 Time in 1 Post
|
|
Quote:
Originally Posted by chuck s
Mine has a Blue Star but is revision 062209.
Only discussion of ammo is "use .22LR ammo." Glad I read that before I tried to stuff 5.56mm NATO in the little critter.
-- Chuck
|
haha...I would like to see you try and shove a 5.56 into that .22lr mag!
My manual is dated the same as yours. Red star on back. Did you have issues with your rifle? Whats your S/N prefix?
|
04-23-2011, 07:52 AM
|
Member
|
|
|
Join Date: Mar 2011
Location: Clinton, Arkansas
Posts: 37
Likes: 0
Liked 0 Times in 0 Posts
|
|
MOE
Bought the MOE on 4/16/11 and the serial numer is DVP20XX. It is 811034LE model.
|
04-24-2011, 11:38 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: SE Kansas
Posts: 1,206
Likes: 139
Liked 404 Times in 242 Posts
|
|
Mine is a DVP model 811033
|
04-25-2011, 04:09 PM
|
Member
|
|
|
Join Date: Apr 2011
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
|
Hi there everyone. New to the forum today. What a great place! I look forward to many productive visits.
Picked up my first 15-22 today used at GM so I did not get any manuals but I did get two extra mags and a Kruger 1.5-5x32 tac scope.
I believe mine is an A1 style but I'm not quite clear on the difference between the A1 and the MOE.
I has the standard stock, no sights (due to scope I imagine) and a threaded barrel with compensator. 25 rd mags stamped 22LR and 25 RD. Mags have red followers.
Rifle has blue bolt and hammer springs and carries serial # DVP8XXX.
Can someone give me an idea of how old this is?
Thanks! Look forward to spending alot of time here!
|
04-26-2011, 09:49 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Houston
Posts: 268
Likes: 3
Liked 17 Times in 14 Posts
|
|
@tkoegler yours is fairly new from late last year to this year. i have the performance center with DVP1XXX and it was made in jan/feb
|
03-27-2010, 07:19 AM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Cleveland, Ohio
Posts: 1,406
Likes: 0
Liked 58 Times in 46 Posts
|
|
My DTM-serial, Blue Star manual, M&P15-22 blew her extractor at round 326 or so mid-December. Second weekend after 300 rounds the first.
Went to S&W immediately and was back on Christmas Eve. Over 1000 rounds since with only a handful of failures to feed. All feeding failures were CCI, by the way; the Winchester 333 is shooting beautifully.
-- Chuck
|
03-28-2010, 08:45 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
|
Newbie on the forum also.
Just picked my 15-22 up today DTZ38xx ,Blue spring,& all
Put 200 rnds threw it ,ran flawless.
Fun Rifle !!!!!!
|
03-29-2010, 06:46 PM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 55
Likes: 1
Liked 0 Times in 0 Posts
|
|
I have a 15-22 A1 DUA. No mark or star or anything on the manual. DOES NOT MATTER. SHOOTS FLAWLESSLY.ALL BRANDS. Does not care. Clears out every magazine with out a problem. Have somewhere near 1000+ rounds fired so far. NOT 1 PROBLEM. Field strip it and bore snake it and clean it after every 250 rounds or so. Love this gun! Just need to get a few accessories now.
|
03-29-2010, 07:23 PM
|
|
Member
|
|
|
Join Date: Jan 2006
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
New 15-22
I also just purchased one this past Saturday. It is labelled DTU 69XX. Have not had a chance to fire it yet, but hopefully soon. I have a number of different rounds and will be happy to report my findings to the group. Guess I'm also learning how to use this post! Sorry for the duplication!
|
03-31-2010, 08:48 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
I purchased on yesterday DUA serial. It has a blue spring which I was to from a rep that it is the newer version. The star on the manual is only for who packed the gun. The gun shot perfectly with the Federal ammunition.
|
03-31-2010, 08:49 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
Sorry "one" yesterday.
|
03-31-2010, 08:59 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 1
Likes: 2
Liked 0 Times in 0 Posts
|
|
new acquisition
dtz1xxxx
from March
|
04-01-2010, 06:32 AM
|
|
US Veteran
|
|
|
Join Date: Jul 2007
Location: USA
Posts: 1,100
Likes: 8,666
Liked 1,676 Times in 607 Posts
|
|
Yesterday, I bought DUA002X. I haven't made it to the range yet but it's sure a fine looking rifle (complete with flash suppressor).
|
04-02-2010, 02:06 PM
|
Member
|
|
|
Join Date: Mar 2010
Location: Pennsylvania
Posts: 22
Likes: 0
Liked 0 Times in 0 Posts
|
|
I purchased my 15-22 about a month ago. It's S/N is DTX31XX and it had the flash suppresser on when I got it so I'm thinking its a newer manufacture. Before today it has run fairly well with only a couple issue with about 400 to 500 rounds through it. Today at the range I had several instances where the rifle did not cycle completely. The spent rounds did not eject properly because the bolt did not travel back far enough to reach the ejector. At least I think this is what happened because the bolt did not go back and reset the hammer. I have been using Federal bulk exclusively from the start with this problem just happening today.
Has anyone else had this? I have read a number of post here and the FTE's are usually the result of the ejector not being aligned properly. Mine seems fine, just not enough force to move the bolt back all the way. (Maybe just a couple bad rounds in the box and I found them today.)
I was also wondering if anyone knows what the difference is between the silver springs and the blue springs. Is one type stronger or weaker than the other? My rifle has the silver but it seems most newer ones have blue or blue springs are installed after the S&W rework.
Thanks in advance for any help.
|
04-02-2010, 06:12 PM
|
Member
|
|
|
Join Date: Jul 2009
Location: Tampabay, Fl
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
Just picked mine up today. S/N DUA48XX. No star on the manual and the revision is 032210. It does not recommend Remington or Winchester Wildcat ammo. I wont get to shoot it until next weekend.
|
04-02-2010, 07:14 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: Florida
Posts: 63
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by tfolk
Just picked mine up today. S/N DUA48XX. No star on the manual and the revision is 032210. It does not recommend Remington or Winchester Wildcat ammo. I wont get to shoot it until next weekend.
|
I've shot both out of my DTX1xxx and I didn't have a problem with either. Next time I go shoot, I'm going to try my luck with remington subsonic.
|
04-02-2010, 11:11 PM
|
Member
|
|
|
Join Date: Apr 2010
Location: Shamokin,PA
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
My buddy has his FFL and drove to his warehouse yesterday for me. Picked it up today, I got the threaded barrel model and the Serial# is DUAxxxx No star on the manual and blue springs in the gun. I paid $407 otd after taxes and transfer. BTW first post here on the forum and glad to be part of a good bunch of people with a lot of helpful info!
|
04-03-2010, 10:36 AM
|
|
Member
|
|
|
Join Date: Jan 2010
Location: Colorado
Posts: 89
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by Excel22
My buddy has his FFL and drove to his warehouse yesterday for me. Picked it up today, I got the threaded barrel model and the Serial# is DUAxxxx No star on the manual and blue springs in the gun. I paid $407 otd after taxes and transfer. BTW first post here on the forum and glad to be part of a good bunch of people with a lot of helpful info!
|
Excel welcome to the forum and the disorder. You have made a good pruchase and found a good bunch to share the fun with.
__________________
Don't shoot fast, shoot good.
|
04-02-2010, 06:00 PM
|
Member
|
|
|
Join Date: Apr 2010
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
|
Mine is a month old also and the serial number is DTX5XXX. After a little over 200 rounds, I had FTEs resulting from a missing extractor, pin and spring. Sent it back to S&W this past Tuesday.
|
04-02-2010, 06:22 PM
|
Member
|
|
|
Join Date: Apr 2010
Location: Controlled California
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
|
Latest Serial Number 15-22
Just found and joined the forum. Ordered the CA model 811032 yesterday sight unseen. It is Serial# DTX5***. Will pick up 4/12 and shoot the same day.
Thanks for all the good posts, observations, cautions (Safety forcing), etc. All this should save headaches.
Figure on putting Federal and Winchester and some 20yr Federal Classic HV rounds for break in. Will go a little slow for first few rounds, snaking about every 5 shots for the heck of it.
Will let all know results.
|
04-07-2010, 06:09 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 9
Likes: 0
Liked 1 Time in 1 Post
|
|
Two new rifles picked up today...DTZ0**** and DTZ2****, both with blue springs and 3 upgraded mags each...SC
|
04-07-2010, 09:07 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: WI
Posts: 19
Likes: 0
Liked 1 Time in 1 Post
|
|
Got mine on Monday. She's a DTZ2***. Blue springs and threaded barrel. Can't wait to go spend some money.
|
The Following User Likes This Post:
|
|
04-08-2010, 08:41 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2010
Location: Lone Jack, MO Pop.528
Posts: 744
Likes: 156
Liked 809 Times in 295 Posts
|
|
Quote:
Originally Posted by kj2082
Can't wait to go spend some money.
|
Don't worry too much. You'll be back in a couple of months trying to get help on how to stop spending money!
__________________
... a little behind in my work
|
04-08-2010, 05:24 PM
|
Member
|
|
|
Join Date: Apr 2010
Location: UT
Posts: 30
Likes: 0
Liked 2 Times in 1 Post
|
|
I purchased one on monday from a local shop. DTZ5, blue springs threaded barrel, I am taking her out on Saturday.
Question how do you know what gen your mag is?
Last edited by gohtar; 04-11-2010 at 12:35 PM.
|
04-17-2010, 09:30 AM
|
Member
|
|
|
Join Date: Feb 2010
Location: Montana(No Vacancy)
Posts: 425
Likes: 0
Liked 4 Times in 4 Posts
|
|
Quote:
Originally Posted by gohtar
I purchased one on monday from a local shop. DTZ5, blue springs threaded barrel, I am taking her out on Saturday.
Question how do you know what gen your mag is?
|
1st gen stamped 22lr, 2nd gen stamped 22lr & 25rd
|
04-17-2010, 10:07 AM
|
Member
|
|
|
Join Date: Mar 2010
Location: California
Posts: 84
Likes: 0
Liked 2 Times in 2 Posts
|
|
DTZ here . . . No threaded barrel for California.
__________________
-Andy
|
08-30-2010, 01:29 PM
|
|
Member
|
|
|
Join Date: Oct 2009
Posts: 14,661
Likes: 7,937
Liked 20,623 Times in 5,958 Posts
|
|
I'd avoid the DUI series.
|
08-30-2010, 01:38 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Louisville Ky.
Posts: 393
Likes: 0
Liked 1 Time in 1 Post
|
|
Quote:
Originally Posted by ChattanoogaPhil
I'd avoid the DUI series.
|
??... You know something apparently that I have missed out on. Please share. I thought after the DTZ series they were all updated to the newest specs. Looks as if I was wrong. Im glad I have a DUU3 series now.
EDIT: I JUST got the joke lol..
|
09-05-2010, 11:41 PM
|
|
Member
|
|
|
Join Date: Sep 2010
Location: Seattle
Posts: 61
Likes: 0
Liked 1 Time in 1 Post
|
|
serial number
hello I am new to the forum and first off I would like to thank all of the posters on this forum for making my decision to buy the M&P-15-22 so much easier. I just bought mine 3 days ago and have been scouring the forums for ideas on how to set it up as well as general information on the rifle and all of the posts have been a great help.
so I bought the plain barrel (no flash suppressor) model and the serial number on mine starts out
DUR66XX
I have not shot it yet but will do so in the next day or two, I have a box of CCI mini mags that I will try.
Last edited by Nachtjager; 09-06-2010 at 12:05 AM.
|
04-18-2010, 05:18 PM
|
|
US Veteran
|
|
|
Join Date: Apr 2010
Location: Kalamazoo
Posts: 9
Likes: 0
Liked 0 Times in 0 Posts
|
|
Mine is DUA purchased last week. Any suggestions on accurate ammo? I bought a value pack of federal and don't think they're that great. Shots are all over the place with spreads of 3-4"
__________________
NRA Life Member
|
04-20-2010, 04:03 AM
|
Member
|
|
|
Join Date: Apr 2010
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
|
DUA Here. Picked up on 4/19 In Arizona. Ordered on 4/13. Blue Spring and 300 Rounds of Federal Lightning(Wally World had em cheap at $1.47 per 50 and were fully stocked so i snagged 2800) and 50 Federal 550 Bulk Hollow Points. All fed amazing and ONLY 1!! FTF Due to my loading so the 1 misfire was caused by user error. These things are sooo much fun i cant wait to get back to the range tomorrow.
|
04-20-2010, 04:15 AM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: TN
Posts: 1,595
Likes: 3
Liked 55 Times in 34 Posts
|
|
Congrats on the new toy and welcome to the disorder
Quote:
Originally Posted by Cooper53
DUA Here. Picked up on 4/19 In Arizona. Ordered on 4/13. Blue Spring and 300 Rounds of Federal Lightning(Wally World had em cheap at $1.47 per 50 and were fully stocked so i snagged 2800) and 50 Federal 550 Bulk Hollow Points. All fed amazing and ONLY 1!! FTF Due to my loading so the 1 misfire was caused by user error. These things are sooo much fun i cant wait to get back to the range tomorrow.
|
__________________
07/SOT2
NRA Instructor
|
|
|
Tags
|
223, 22lr, carbine, cartridge, certificate, colt, compensator, ejector, extractor, fluted, mp15, performance center, polymer, remington, scope, shroud, sig arms, smith and wesson, smith-wessonforum.com, springfield, subsonic, suppressor, tactical, wildcat, winchester |
Posting Rules
|
|
|
|
|