I know I can see everyone's optics in the main picture thread.. but most people don't tell what they have.

So... post a picture of your rifle and tell us what optics you have mounted on it. Include the mount/risers/etc.

Primary Arms micro w/ removable base
American Defense QD lower 1/3rd mount

Bushnell Banner 1-4x scope in a Leapers once piece mount. I don't think this mount would clear MBUIS. The mount and optic on my M&POR is an Burris 1-4x with the Primary Arms Mount. I don't have that setup anymore.

Which one?



f.t.

__________________
South Carolina-God's country

COPY CAT


LOL



Stav

Primary Arms MicroDot. PA Riser.



Uploaded with ImageShack.us

BSA 30mm Red Dot on a 1" riser that was cut down from 5" to around 3" in length for a cleaner look and weight reduction.



Primary Arms M3 Style 30mm Red Dot on Primary Arms Cantilever Mount

You sold me. Been looking for that combo before I ordered it.

Here's mine with a Sightmark Perfect Red Dot 5 MOA Sight from RRAGES: Sightmark Perfect Red Dot 5 MOA Sight

Primary Arms:

• Multi-Reticle M3 Clone with High Cantilever Mount
• 3x Long Eye Relief Magnifier with Flip-to-Side Mount

New favorite

Primary Arms Red Dot

__________________
Smith & Wesson M&P 15-22

Leatherwood HiLux 1-4x24 CMR Scope
Burris P.E.P.R. mount
MGM Switchview™ Lever



Chad

Nikon prostaff rimfire 3-9x40 on a utg riser.

Attached Images

P5170703.jpg (98.9 KB, 340 views)

Eotech 512

__________________
July 27, MCMXIV

Nothing special but works good for me...

__________________
inmysights
"shooting for fun"

Here's some pics of my new 15-22 with Midway's BSA Tactical Mil-Mil Rifle Scope, 4-14 x 44mm with First Focal MRAD Reticle:



I wanted to use the excellent Burris AR-P.E.P.R. QD mount on it, and read (after ordering) that it wouldn't work with the above scope. So I got out my Dremel and ground radii on the inside of the upper and lower mounts until it cleared. Not a very neat job, but now covered with black paint and it's not visible when mounted anyhow. Now works perfectly with the BSA scope:



And my completed new baby:

This works well. A Burris 2x7 in Burris mounts with a Burris Fullfield ll holographic site mounted to a Picatinny ring top.

Larry

Attached Images

	DSC_0001 - Copy.jpg (51.3 KB, 321 views)
	DSC_0008 - Copy.jpg (85.3 KB, 356 views)

The only difference in the pic's is I have just ordered a 1 inch riser for both my mp's due to the fact that with my micky mouse ears on I cant see thru the scope without dislodging the ears lol.

they both use weaver high mounts and one is a NCStar the other is a wally world cp and the cp is just as good but cost half as the ncStar

Attached Images

	M & P 15 quad rail with bipod and 4 x 16 x40 scope 5-4-12 resized.jpg (81.5 KB, 221 views)
	M & P 15-22 with bipod and 3 x 12 x 50E scope 5-4-12 resized.jpg (63.4 KB, 210 views)
	mossburg 42a22sl lr.jpg (153.1 KB, 130 views)

15-22: Bushnell Trophy "T" Dot. Red/Green, variable intensity, 1 MOA dot. Crystal clear optics.




15-Sport: Primary Arms M3 Clone on a high cantilever mount. 3 MOA dot.

The M3 Clone is practical accurate. I prefer the 1 MOA dot on the Bushnell Trophy.

I'm saving my pennies for an EoTech.

__________________
-John

Nikon p223 3-9 with Burris pepr mount.


Sent from my SPH-D710 using Tapatalk 2

[QUOTE=JaPes;136523178]



15-22: Bushnell Trophy "T" Dot. Red/Green, variable intensity, 1 MOA dot. Crystal clear optics.

Looks fimiliar lol bushnell trophy

My AR with Aimpoint comp4 qrd disco

Here's mine with an Eotech 512 and a 3x magnifier.

Attached Images

P5040524.jpg (87.2 KB, 334 views)

Folding MBUS sights, BSA Sweet 22 3x9 scope with UTG quick release rings and a UTG 1/2" riser. Love the scope, I use the 40 grain turret with CCI Blazers and Velocitors and it is dead on just waiting to take it hunting this fall.

photo 6.JPG

photo 8.JPG

My Simmons .22 Mag 3-9x32 mounted with Weaver extra high rings.

Nikon P22 with Nikoplex reticle . Perfect optic for the 1522 when I'm shooting it. Mounted on a Brownell one piece aluminum mount; pretty much a clone of the Wilson mount.

Frequent reader of this forum, convinced to make my first gun a 15-22

Optics I went with:

NcStar Vism Micro Green Dot with integrated laser on a UTG 3 slot angled QD Rail mount.

Attached Images

	2012-05-21_19-04-47_369.jpg (79.0 KB, 205 views)
	2012-05-21_19-09-20_83.jpg (103.2 KB, 267 views)

My three amigo's.....
[IMG][/IMG]

oops just realized this is the M&P15-22 thread not the M&P15!

Had this...

\

Now using this...like this better...

__________________
Owner - Smoking Gun Supply

15-22 MOE with UTG 3-12 X 44 Compact on a 0.5" UTG riser, it has the 36 color Mil Dot reticle. Holds zero and good eye relief.



I also have the UTG 5th Gen Red/Green Dot (DS3840W) which came with a high profile QD cantilever mount. It gives lower 1/3 cowitness and works well. The green failed on the first one almost immediately but the replacement has been solid.



Zax.

Just bought and mounted
UTG 3-12x44mm compact swat.

Had to send it right back the optics would not light up.

Left to right....

Aimpoint micro/larue LT660 mount, Millet DMS-1/burris tactical rings, PA micro red dot/PA mount



Trijicon TR24G on Larue SPR 1.5 mount

don't fall in deep water carrying that!

NcStar Mark III with P4 Ret, .223 BDC and DDAB red dot.

Closer look:

Nice setup Brett (and a sweet looking ride too), what's going on with the bolt catch release? or is it the mag release - ambi?

Prototype Ambi Selector (BAD Levers and custom center section compliments of Jon), Extended Charging Handle Latch from Belt Fed. Bolt catch is stock.

Thanks

Vortex Viper 3-9X40




Zack
Using Tapatalk

Primary Arms red dot on my son's 15-22


Trijicon ACOG TA31H on Larue mount on my SPR


Aimpoint micro t-1 on Knights Armament mount on my SBR


Aimtpoint micro t-1(2 moa dot) on Larue LT660 on my PredatAR


US Optics SN4 on Larue mount on my custom built Noveske

New scope/mount/front folder

Primary Arms 1-4x24
Burris P.E.P.R.

Primary Arms M4 Multi Reticule with Primary Arms screw mount:

Centerpoint 4-16x40 on NcStar 3/4 riser.

^^
Remember to list your optic and mount used with the pic, otherwise it's another 15-22 pic thread.

Which riser are you using? And is it able o use the irons as well? Or is that a carry handle?

Nikon Prostaff Rimfire .22lr scope on an NcStar 3/4" QD riser.

I'm currently running a Barska holographic sight on my 15-22. I chose to go with the holo type red-dot so I can get a better overall field of view. It's mounted on the top rail with no adapters or risers. Once I got it dialed it, it's pretty accurate for the price. I just started shooting a rifle after a couple of months with pistols, so I'm working on my technique. At 75 feet, I can manage 2" groups without a rest or bipod.

Picked it up at Big 5. Tag said $54.99, but it was on sale in addition to an e-mail couple. Before tax, it was $34.99.

EOTech 512 with a Primary Arms 3x Magnifier

Which to choose (first)?

UTG Accushot SWAT 3-12x44... reach out and touch a zombie! Also have NC Star 5mw green laser for close encounters of the first & last time

MP15-22 forum; optics & info pertinent to the thread:
ACOG TA44SR-10 1.5X Red Circle/dot. ADM AD B2 mount. Used LaRue LT-105 mounts initially but didn't like single pressure point on the plastic upper (they're fine for metal uppers). Liked the AD B2 mounts wider clamp style better for the MP22's.

ACOG TA33G-H 3X Green Horseshoe. ADM AD B2 mount.