Have fun, 30 years ago I used to road race on a Honda Ascot 500. A big single that I turned into a giant killer with all the mods; hi-lift cam, hi-compression piston, megaphone pipe, carb, custom rear sets, shocks, etc. I even swapped the fork from a Suzuki 1000 to get a stiffer yet more responsive front end. The SR's can be made into great cafe racers as well and with a British look.

latest orders went out this morning.

I have a few more kits left. Shameless bump.

Looks like my gun came in just in time. Found this thread and sent payment through PayPal a couple minutes ago.

I found this forum and registered, found two m&p 22 magazines (at a reasonable price), and ordered your safety replacement kit.
I hope you still have some to ship.
Thanks Ryan

I'll be shipping out orders Monday!

Another wave of orders went out today.

I still have some kits left.

i hope they last til next week when I get paid.

What! Owning guns with out a safety! That's none sense! What did people ever so without them before! I'm sure removal of the safety isn't a big deal as the most important safety feature is your firearms safety practice and knowledge.

Just sent payment for mine :-)

Plugs ordered since Wednesday where shipped this morning.

Are you still shipping out? Sent payment via PayPal on the 17th.

Thanks....

PM me your info, i sent all the plugs out already

Just installed mine tonight, with the exception of the roll pins giving a little trouble, Installation was easy, Thank you Ryan

just ordered one tonight

Thanks for the recent orders. Orders placed on the 29th of June until now will be shipped out on Friday. Out of town visiting family for the Holiday.

Girlfriends dad just picked up a 9mm Shield, excited to try it out. Also going to be firing my rebuilt 1942 Mosin Nagant for the first time. Excited for that as well. Everyone have a good holiday!

The instructions mention a U shaped spring. It says "don't lose it" I didn't see where it was reinstalled. ?????

Is there a kit that has just the cover buttons that would fit over the existing dowel? Even if they extended just a little bit. Essentially two buttons with a square recess.

Not at this time. It's harder for me to make it with a square recessed space.

sounds good , have fun

Latest rounds of plugs went out today. There was a slight delay in shipping since every office supply store was out of envelopes.

Also, I am not sending printed instructions anymore, the cost of printer ink is way to high to be going through a cartridge every 10 orders.

Good news. I just found more dowels and ABS plastic on sale. Decided to restock everything. I am currently printing 30 kits. So I have a good amount left if anyone else is interested. I am shipping recent orders out Monday morning!

Thanks!

For those who ordered plugs since thursday, I just finished the kits and put them in the mail tonight.

I still have plenty of kits left for those who are still interested. You can order them here: [ MADE BY RYAN JAY ]

Thanks The kit worked perfect. Took less than 5 min total. I found a wire tie on barrel to front helps a lot. Again thanks
B

I want to get one of your kits, But did not get a response when I eamiled you about them. Do you have any left?

Rad Darby

Hello this is Dwight, Ryan's now ex-roommate.
Ryan moved across country and couldn't take the 3D printer with him. So he gave me permission to take over for him.
email him if you want verification.
If you're still interested you can email me at [email protected]
I have the pdf with install instructions.
Same goes for everyone else reading this.

Not trying to hijack this, but I assume people are looking for plugs since you've removed the safety.

I'm looking for the safety lever for a full size 9mm. If anyone has one, or knows where to get one, please pm me. I've already tried S&W, Brownells, Midway, and SSS. Thanks.

I have kits ready to go.

Just a heads up to those that are interested.

dwightdoane is legit. I just ordered a set of plugs from him on Saturday night and I just got them today. Took 3 days from Florida to California.

__________________
M&P 9 / M&P 22 / M&P 15-22

I purchased this kit around 7-8 months ago. I now have about 9,000 rounds through the gun after installing the kit - no problems at all. Plugs hold in place. The kit comes with two sets of plugs, still on the first set, which shows no signs of needing replacement.

Good product and customer service...Great to see something being made with 3D printing...

Thanks for the positive feed back!

I ran out of dowels for the kit, sending out the last one tomorrow. As soon as I get paid I'll get more. I'm still taking orders if anyones interested. You can preorder, and I'll send em out as soon as I can. Or email me, and I will let you know when they're back in stock.

Just bought some from Dwight. Came as advertised. Worked well.

Just sent you an email requesting payment info. I need a set of these.

Thanks.

Dowels came in today.
Now I'm ready for the next 98 orders.
Just sent out 2.

to order: email me letting me know you want a set, that way I can get it ready, (print out a set, buy more postage, etc), or let you know that I'm otherwise not ready. Then you can purchase via paypal, my account is the same as my email
[email protected]
then soon as I receive payment I'll send it out.

Nows the time to buy

At the end of next month i'm moving, so the printer will be inop for a while
It's going to need to be recalibrated, and i'm lazy, so it'll take a lot longer than it should, so i won't be able to make kits right away

I just ordered filament, and will be getting the printer back up and running by this weekend if all goes as planned

Get your orders in NOW!!!

I will go ahead and order a set if it goes as you planned.

Sent from my SM-N900T using Tapatalk

Not to Hijack, but that sucks about the Ticket. I wonder what state you live in. I ask because I'm a jeeper and I've never been hassled for tire showing.

I need a set. Email sent.

I just purchased a S&W M&P .22LR compact pistol which is made
by Smith and Wesson in the USA. Is this conversion also compatable?

anymore of these kits left? I want ... wait ... I need one

PM Sent!

__________________
M&P OTAKU

Sorry people, but I must have missed something. What is the point of removing the safety?

Dropped an email, hopefully there's still a kit available.

I know I said I was shooting for the 'end of the week' almost a month ago, but I recently started going to school full time, and started a new job. So i have very little 'free' time.
The printer is up and running. But it still needs a good calibration. I tried, but it just did want to stay calibrated. I moved a few months ago, and it wasn't until last month that I cleaned up enough of the garage to set up a table for it. The move also messed up the printer's calibration, so I still need some time to really dial it in. I will update the thread when I'm back in business. I promise I am working to get it done asap, but right now my car is taking up the garage, but will be out by monday. So I can't even get to the printer until then. I want the printer back up for my own personal.

Because my M&P full size has no safety, my G19 has no safety, my G26 has no safety, my FNS has no safety, my.......

any plans for plugs for the M&P22 compact?

I contacted the guy that took over for Ryan. He does not have a compact, so has no idea if they are the same. I told him when I do get a compact, I will compare it to my full size and see if they work. If so, he we sell me another set.

Being that the compact is shrunk 15% from the full size, I assume that the plug would be smaller.

Anyone know when these will be available for purchase again? I just bought an M&P .22 Pistol and am looking for one of these.
Thanks!

Anyone else have a 3d printer that could make these? Or the print file that could be used at thingverse?