Quote:
Originally Posted by Derek.J.
Is there any way to prevent this? Or is it just something that happens on occasion?
|
Sorry I didn't respond to this earlier. No, this should never happen. However, mechanical devices have issues sometimes. If this only happens this one time, we can chalk it up to an anomaly. If it happens again, you have a broken gun.
An Apex Failure Resistant extractor isn't a bad idea, but shouldn't be necessary. If it happens again, I'd call S&W first. They will either replace the extractor for you or send you the part. Most likely they'll have you send it in for them to replace.
Press on the extractor with your finger. There should be a decent amount of tension on it. Also, with the slide removed, the extractor should hold a round. If there is no tension or it won't hold a round, it needs repair; might be missing the spring.
Quote:
Originally Posted by MKE.guns
- Rack the slide at least three times (I'll explain why later)
Still waiting
MKE
|
OK, I did explain it, but maybe I wasn't clear.
The reason to always rack it three times is for defensive purposes. When at the range, if the round comes out on the first rack, obviously there is no reason to rack it more. However, we want to develop the habit of racking it three times because in an emergency situation we don't want to hesitate.
Just rack it three times. The spent casing already didn't come out on the shot so, it may require a few racks to get it out. In an emergency, racking three times gives you the best chance of clearing it.
Is that better?