|
|
01-12-2022, 04:53 PM
|
Member
|
|
|
Join Date: Dec 2020
Location: Michigan
Posts: 123
Likes: 0
Liked 70 Times in 35 Posts
|
|
Why no 20 inch?
I’m interested in the M&P 10 but I am NOT interested in a 16 or 18 inch barrel, to me that makes no sense in .308 or 6.5 creedmoor, those are full power cartridges and should have full barrels or else what’s the point? If I wanted a carbine for close/medium range I’d stick to 5.56, it’s better suited for the job. But I am looking for a semi auto precision rifle, there is no need for the velocity drop from a carbine barrel, nor would I use a full powered cartridge for close range work as the extra flash and blast, extra recoil, and reduced magazine capacity would not be worth it over 5.56, so I have no idea why I can only find the M&P 10 in carbine length barrels, it’s like tits on a bull, why?
I’m aware of the performance center version in 6.5 creedmoor, but I’m not ready to spend an extra $800 just for 2 inches of barrel. Why is the non performance center version not offered in 20 inch? Or even better 22, 24, or 26 inch? And why no 6.5 Creedmoor except in the performance center version?
It doesn’t make sense.
|
The Following 2 Users Like Post:
|
|
01-14-2022, 02:49 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
That's something you'd have to ask S&W about directly. My guess, is that since it is possible to hit targets out to 750ish yards out of the box that S&W thinks it's good enough. Max effective range for .308 when taking game is about 800 yards anyway. 2 more inches of barrel might give you 1,000 yards but even then the limits of the round's capability is being met or exceeded. Punching paper or hitting a steel target is a bit of a different animal since round lethality isn't a concern.
|
The Following 4 Users Like Post:
|
|
01-14-2022, 02:54 PM
|
Member
|
|
|
Join Date: Nov 2005
Location: VA
Posts: 4,678
Likes: 1,449
Liked 4,519 Times in 1,935 Posts
|
|
The barrel length for a 308 on an AR is well accepted to be optimized at 18”
__________________
S&W factory revolver armorer
|
The Following 5 Users Like Post:
|
|
01-14-2022, 02:57 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
Quote:
Originally Posted by ken158
The barrel length for a 308 on an AR is well accepted to be optimized at 18”
|
I think you may be right from research I had done in the past but it has, admittedly, been a number of years since I did the research.
I'm also trying to get a feel for where the OP is coming from. If he is looking at long range precision shooting, it may be influencing his question.
|
The Following User Likes This Post:
|
|
01-15-2022, 04:55 AM
|
Member
|
|
|
Join Date: Dec 2020
Location: Michigan
Posts: 123
Likes: 0
Liked 70 Times in 35 Posts
|
|
Quote:
Originally Posted by sgtsandman
I think you may be right from research I had done in the past but it has, admittedly, been a number of years since I did the research.
I'm also trying to get a feel for where the OP is coming from. If he is looking at long range precision shooting, it may be influencing his question.
|
This, longer barrel gives more velocity, which is better for long range shooting, my goal is a 1,000 yard capable rifle.
|
The Following 2 Users Like Post:
|
|
01-20-2022, 11:46 AM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: Lost Wages, NV
Posts: 20,074
Likes: 24,613
Liked 29,408 Times in 10,939 Posts
|
|
Quote:
Originally Posted by ken158
The barrel length for a 308 on an AR is well accepted to be optimized at 18”
|
I wouldn't say optimized. I would call the 18" barrel the best compromise for .308.
__________________
Release the Kraken
|
The Following User Likes This Post:
|
|
01-20-2022, 12:03 PM
|
|
SWCA Member
|
|
|
Join Date: May 2020
Location: AZ-Sierra Vista
Posts: 1,647
Likes: 3,912
Liked 6,770 Times in 1,294 Posts
|
|
Quote:
Originally Posted by 9245
This, longer barrel gives more velocity, which is better for long range shooting, my goal is a 1,000 yard capable rifle.
|
An off the shelf, mass produced AR in .308 is probably not the tool for that job.
S&W makes a decent rifle at the price point, but it's not a precision instrument. It will certainly lob bullets out to 1k, but expecting any kind of serious accuracy is probably asking too much.
|
The Following 8 Users Like Post:
|
|
01-20-2022, 12:04 PM
|
|
SWCA Member
|
|
|
Join Date: May 2020
Location: AZ-Sierra Vista
Posts: 1,647
Likes: 3,912
Liked 6,770 Times in 1,294 Posts
|
|
Quote:
Originally Posted by LVSteve
I wouldn't say optimized. I would call the 18" barrel the best compromise for .308.
|
Agree. It's appropriate to the platform and it's designed mission.
|
The Following User Likes This Post:
|
|
01-20-2022, 03:09 PM
|
Member
|
|
|
Join Date: Nov 2006
Location: Montana
Posts: 5,164
Likes: 3,441
Liked 6,258 Times in 2,063 Posts
|
|
That's where my M1A SuperMatch shines!!!
Randy
|
The Following 2 Users Like Post:
|
|
01-21-2022, 10:12 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
I'm pretty much agreeing with the others. The M&P10 is a good rifle but the AR platform in general is generally not the best choice for a precision rifle. It isn't designed for that.
You CAN make it into one but off the shelf, I'm not sure if you will find a factory rifle that will meet precision shooting requirements. At least not without going to a custom made builder.
Generally speaking, AR platforms are 1.5 - 3 MOA rifles. Some will meet 1 MOA but that is the luck of the draw on that. They do exist but are not common and I don't think on purpose. More of a happy accident.
|
The Following 2 Users Like Post:
|
|
01-21-2022, 10:23 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,292 Times in 1,362 Posts
|
|
Quote:
Originally Posted by sgtsandman
That's something you'd have to ask S&W about directly. My guess, is that since it is possible to hit targets out to 750ish yards out of the box that S&W thinks it's good enough. Max effective range for .308 when taking game is about 800 yards anyway. 2 more inches of barrel might give you 1,000 yards but even then the limits of the round's capability is being met or exceeded. Punching paper or hitting a steel target is a bit of a different animal since round lethality isn't a concern.
|
I would question even remotely thinking of the .308 as an 800 yard game cartridge. To much chance the animal will move while the bullet is en route to the target, resulting in a crippling shot. Bullet performance is pretty iffy at that distance too.
Last edited by smoothshooter; 01-22-2022 at 01:11 AM.
|
The Following 3 Users Like Post:
|
|
01-21-2022, 10:26 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,292 Times in 1,362 Posts
|
|
Quote:
Originally Posted by Rodan
An off the shelf, mass produced AR in .308 is probably not the tool for that job.
S&W makes a decent rifle at the price point, but it's not a precision instrument. It will certainly lob bullets out to 1k, but expecting any kind of serious accuracy is probably asking too much.
|
A good bolt gun will perform better at longer ranges and be cheaper too.
|
The Following 2 Users Like Post:
|
|
01-21-2022, 10:27 PM
|
Member
|
|
|
Join Date: Jan 2009
Posts: 338
Likes: 1,109
Liked 255 Times in 131 Posts
|
|
I have yet to find an off the shelf large frame AR that is truly, consistently sub MOA accurate. I have been through several in a quest to get rounds on target at long range.
.308 was a disappointment across the board. You can't push pressures in a gas rifle like you can in a bolt rifle to get that little bit of extra velocity to get you out to 1k yards without the rifle throwing fits and making problems.
I ended up building my own custom gas rifle and chose to barrel it in 6.5 Creedmoor. It was a lot more money than most production rifles but it is truly, consistently, extremely accurate.
To the OP, if you do get a production rifle with the intent of customizing it down the road, be very careful in knowing exactly what you are buying. There is no mil spec on large frame AR's and most of the manufacturers are having everything made to a proprietary standard so there is zero chance of upgrading or customizing and no parts interchangeability.
|
The Following 3 Users Like Post:
|
|
01-21-2022, 10:39 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
Quote:
Originally Posted by smoothshooter
I would question even remotely thinking of the .308 as an 800 yard game cartridge. To much chance the animal will move while the bullet is en route to the target, resulting in a crippling shot. Bullet performance is pretty iffy at that distance.
|
It depends on the game. I wouldn't do it. Not that I really have much of a chance anyway. Unless one is on a gas line or power line right of way or shooting from hill top to hill top or at an open field from a hill top, anything more than 300 yards is pretty much going to be the max clear shot range here. Most of everything I hunt is wooded and inside 100 yards.
|
01-22-2022, 02:26 AM
|
Member
|
|
|
Join Date: Oct 2021
Posts: 378
Likes: 407
Liked 463 Times in 163 Posts
|
|
Just my opinion on this, and having various pieces of paper hanging on my "I love me" wall, I do over think things, you have to look at what the AR platform was designed to do.
Getting 1 person of angle at the 3 to 4 hundred yards, which makes it good enough to solve the problem of having someone trying to kill you, is what it was designed for.
Of course you can build an AR that does much better than that, but it's going to take some work, which will translate into cost, where there are designs/platforms that can be made for a lot less (Tikka T3x in 6.5 with a 24" barrel is my newest and current favorite.) So for a manufacturer it makes more sense to come up with something affordable, and let the guys who are serious about reaching out farther pay for the custom tuning themselves.
You mentioned the S&W PC versions and the extra cost. When it comes down to it you're paying for more than just 2" of barrel. You could easily swap a longer barrel for less than the PC version, and I would expect it to do better, but I wouldn't expect it to do as well as something that had additional work done to it.
Last edited by Tu_S; 01-22-2022 at 02:31 AM.
|
The Following User Likes This Post:
|
|
01-22-2022, 08:21 AM
|
Member
|
|
|
Join Date: Aug 2014
Posts: 529
Likes: 774
Liked 862 Times in 314 Posts
|
|
Quote:
Originally Posted by 9245
This, longer barrel gives more velocity, which is better for long range shooting, my goal is a 1,000 yard capable rifle.
|
My guess is that most M&P 10 customers aren't looking to do that with an out of the box AR.
Last edited by Oldsalt66; 01-22-2022 at 08:22 AM.
|
03-27-2022, 10:56 AM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,292 Times in 1,362 Posts
|
|
Quote:
Originally Posted by sgtsandman
It depends on the game. I wouldn't do it. Not that I really have much of a chance anyway. Unless one is on a gas line or power line right of way or shooting from hill top to hill top or at an open field from a hill top, anything more than 300 yards is pretty much going to be the max clear shot range here. Most of everything I hunt is wooded and inside 100 yards.
|
Be a better hunter and not just a shooter.
Get closer.
|
The Following 2 Users Like Post:
|
|
03-27-2022, 12:57 PM
|
Member
|
|
|
Join Date: Oct 2009
Posts: 1,204
Likes: 778
Liked 1,977 Times in 695 Posts
|
|
The easy fix would be.
Quote:
Originally Posted by 9245
This, longer barrel gives more velocity, which is better for long range shooting, my goal is a 1,000 yard capable rifle.
|
To just get a .243 Winchester upper for the gun.
|
12-03-2023, 09:42 PM
|
Member
|
|
|
Join Date: Nov 2023
Location: Southern Indiana
Posts: 239
Likes: 131
Liked 361 Times in 152 Posts
|
|
If my Magneto Speed Chrono and the ballistics app that I use are correct, the Hornady Superformance 165 SST projectile is still supersonic at 1000. That means that once you’re dialed in, and subject to your ability to judge/guess wind, you’ll make a lot of hits on a 24 inch by 24 inch steel target at 1000. That 165 is going 2665 FPS out of my 16 inch barreled Armalite AR-10. I am of the opinion that a good quality AR-10 from makers like S&W and Armalite will (*eventually) shoot 3 shots around 1.3 MOA or less. Again, that will results in pretty regular hits at 1000. But the catch is, when that barrel gets hot, more than likely, groups open up.
The more you shoot and clean those AR-10 barrels, the better they shoot. My rifle’s groups have shrunk considerably now that I have a few hundred rounds down the tube.
A few days ago I hit a 200 pound, 10 pointer with that 165 SST. When I opened that critter up, it looked like a grenade went off. Impact velocity at 145 yards was 2378 feet per second, carrying 2072 pound feet of energy. DRT.
I don’t need anymore anything. I have a ton of respect for a 16 inch .308 AR.
|
12-03-2023, 09:55 PM
|
|
Moderator
|
|
|
Join Date: Jun 2007
Posts: 26,916
Likes: 996
Liked 19,057 Times in 9,318 Posts
|
|
Almost 2 year old thread and the OP was last here 18 months ago. Hope he found his accurate .308.
__________________
Alan
SWCA LM 2023, SWHF 220
|
The Following User Likes This Post:
|
|
12-04-2023, 12:07 PM
|
Member
|
|
|
Join Date: Nov 2023
Location: Southern Indiana
Posts: 239
Likes: 131
Liked 361 Times in 152 Posts
|
|
By now he has found something new to be dissatisfied.
Condensed version after running the numbers: The 16 inch AR at 500 yards is the equivalent of my 24 inch 5R barreled REM at 575. That seems like a fair trade off for 8 inches less barrel on the AR-10.
|
12-04-2023, 09:48 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,292 Times in 1,362 Posts
|
|
Quote:
Originally Posted by LVSteve
I wouldn't say optimized. I would call the 18" barrel the best compromise for .308.
|
What about increased muzzle blast?
|
12-04-2023, 10:04 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,292 Times in 1,362 Posts
|
|
[QUOTE=sgtsandman;141360553]That's something you'd have to ask S&W about directly. My guess, is that since it is possible to hit targets out to 750ish yards out of the box that S&W thinks it's good enough. Max effective range for .308 when taking game is about 800 yards anyway. 2 more inches of barrel might give you 1,000 yards but even then the limits of the round's capability is being met or exceeded. Punching paper or hitting a steel target is a bit of a different animal since round lethality isn't a concern.[/QUOTE
Anyone shooting at living creatures ( excepting enemy soldiers ) at distances approaching of 800 yards with ANY hunting cartridge is simply being irresponsible.
Be better hunters. Get closer.
Or pass up the shot.
|
12-04-2023, 11:00 PM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,923
Likes: 14,087
Liked 13,775 Times in 4,993 Posts
|
|
Quote:
Originally Posted by smoothshooter
I would question even remotely thinking of the .308 as an 800 yard game cartridge. To much chance the animal will move while the bullet is en route to the target, resulting in a crippling shot. Bullet performance is pretty iffy at that distance too.
|
If you take 800 yd shots at game you need to become a better hunter and get closer.
__________________
S&W Accumulator
|
12-05-2023, 01:30 PM
|
Member
|
|
|
Join Date: Apr 2012
Location: Wisconsin
Posts: 63
Likes: 258
Liked 33 Times in 22 Posts
|
|
Ruger SFAR Rifle (Small Frame AR) in .308 comes in either 16" or 20" barrel. My son just purchased the 20" version. What a sweet package.
|
12-10-2023, 04:05 AM
|
Member
|
|
|
Join Date: Aug 2009
Location: Seattle
Posts: 3,422
Likes: 1,008
Liked 3,595 Times in 1,521 Posts
|
|
Quote:
Originally Posted by Charlie Foxtrott
To just get a .243 Winchester upper for the gun.
|
or a 6 or 6.5 Creedmore.
__________________
NRA RSO
|
12-11-2023, 11:49 PM
|
Member
|
|
|
Join Date: Nov 2023
Location: Southern Indiana
Posts: 239
Likes: 131
Liked 361 Times in 152 Posts
|
|
1000 yards hits on a 24”X24” steel plate with a 308 is not all that terribly difficult. If I can do it, it can’t be too hard. Get out there and try it. You’ll see.
Muzzle blast? Muffs over plugs. Or a suppressor.
I have 6.5 Creeds in an AR-10 and a REM 700. Both wear Kreiger barrels. They’re easier to impact with. I don’t care what the charts say, those 6.5s don’t hit as hard as that good old .308.
|
The Following User Likes This Post:
|
|
12-12-2023, 10:56 AM
|
US Veteran
|
|
|
Join Date: Dec 2019
Location: WNC
Posts: 205
Likes: 397
Liked 223 Times in 102 Posts
|
|
My experience with 308 at 1000 from the national matches years ago, I was shooting 180gr smk bullets in my M1A and I had the opportunity to talk to the guys who were pulling my target and they told that my bullets were yawing bad or tumbling when they went thru the target. In the same match I scored for a national guard shooter who was hammering the 10 ring with a M14 and he told me he was shooting 180smk with a max load of 4064 powder. 308 will work at 1000 but that is about the limit reasonably.
|
12-12-2023, 05:20 PM
|
Member
|
|
|
Join Date: Nov 2023
Location: Southern Indiana
Posts: 239
Likes: 131
Liked 361 Times in 152 Posts
|
|
JR, Do you know what rate of twist was in your M1A? Was it the 1 in 11.25”?
Maybe the National Guardsman had a 1 in 10?
I remember some of the service guys shooting hot loads. The op rod made a “ping” noise. They wouldn’t reload that brass.
|
12-13-2023, 12:04 AM
|
US Veteran
|
|
|
Join Date: Dec 2019
Location: WNC
Posts: 205
Likes: 397
Liked 223 Times in 102 Posts
|
|
Quote:
Originally Posted by Yendor357
JR, Do you know what rate of twist was in your M1A? Was it the 1 in 11.25”?
Maybe the National Guardsman had a 1 in 10?
I remember some of the service guys shooting hot loads. The op rod made a “ping” noise. They wouldn’t reload that brass.
|
My gun has I:10 I still have it although I havent shot it in a long time. The advantage he had was a heavier load and he was no doubt a better rifleman. I have no idea what barrel the guard was using.
|
12-13-2023, 09:59 AM
|
US Veteran
|
|
|
Join Date: Dec 2019
Location: WNC
Posts: 205
Likes: 397
Liked 223 Times in 102 Posts
|
|
I don’t want to hijack the op’s thread but to his point the physics involved in launching a bullet and have it land in relatively the same spot 1000 yards away twenty times is a feat that requires experience and equipment and the barrel length to give you the velocity with the 308 is a huge part of the equation.
|
12-13-2023, 11:07 AM
|
Member
|
|
|
Join Date: Nov 2023
Location: Southern Indiana
Posts: 239
Likes: 131
Liked 361 Times in 152 Posts
|
|
A 175 Sierra started out at 2565 fps from my Remington 5R is going 1230 fps at 1000. Once you’re zeroed, on a relatively calm day, you’ll get a lot of hits on a 24 inch square at 1000. I’ve done it. That’s a pretty mild load for that rifle.
Can you get 2565 with a 175 in 16 inches? I’m not willing to push it in an AR. When I need hot loads, I buy factory ammo. I’ll let someone else do the testing with their equipment. Hornady factory 165 is doing 2665 out of my 16 inch AR-10. So in theory it’s possible. Maybe one of these days I’ll put a big scope on my 10 and put all this theory to the test.
|
12-18-2023, 06:47 PM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,658
Likes: 1,829
Liked 5,417 Times in 2,732 Posts
|
|
Having shot .308 at 600 & 1000 yard F class matches I noticed a few things. Note: I was using the then SMK Palma 155 gr bullet. The current Palma bullet has a BC over .500. I got lots less drop at 1K and the wind drift @ 2850 f/s was same/same as the 175 SMK at lower velocities.
1. 600 yards is basic ballistic math and shooting fundamentals. Wind is a consideration, but easily coped with.
2. 1K is still fundamentals, but judging the wind is an art form.
3. I got to shoot a national class winning rifle with a Nightforce scope. They may well be worth the money (I could see scoring rings at 1K), but I can't afford them.
|
|
Posting Rules
|
|
|
|
|