|
|
|
08-18-2017, 08:29 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: VA
Posts: 1,336
Likes: 467
Liked 2,047 Times in 648 Posts
|
|
Wolf Ammo Advisory for M&P rifles
*** Advisory Warning - June 8, 2017 ***
WOLF Performance Ammunition has received notifications relating to Smith & Wesson M&P-15 rifles that are discharging out of battery which is evidenced by a lack of damage to the chamber and barrel extension. This shows that the rifle’s bolt did not lock into the barrel, yet the hammer was still able to strike the firing pin to detonate the cartridge and cause a failure.
Advisory - Wolf Performance Ammunition, steel cased ammo, brass ammo,
__________________
Use should dictate gear!
|
The Following 2 Users Like Post:
|
|
08-18-2017, 08:34 AM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Virginia
Posts: 8,865
Likes: 10,603
Liked 15,203 Times in 5,250 Posts
|
|
This sounds more like a weapon problem than an ammo problem.
I'm not sure I understand.
|
The Following 3 Users Like Post:
|
|
08-18-2017, 08:42 AM
|
|
Member
|
|
|
Join Date: Aug 2002
Location: Morgan County Alabama -
Posts: 440
Likes: 156
Liked 134 Times in 58 Posts
|
|
Wolf is taking a vary cautious stance.
But being unique to only M&P15 firearms is pretty weird.
|
The Following User Likes This Post:
|
|
08-18-2017, 08:46 AM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
Quote:
Originally Posted by Jessie
This sounds more like a weapon problem than an ammo problem.
I'm not sure I understand.
|
I was thinking the same thing but Wolf is the one posting this to seem to say it's the ammo?!?! Or maybe they're just trying not to blame anyone for fear of loosing customers?!
Another thing is they didn't mention which ammo. They say M&P 15 which is 223/556 but they SELL (Wolf is an American company and doesn't make ammo) quite a few different types from different plants and countries around the world. Steel case comes from Russian plants (Tula) but brass comes from Taiwan (used to be PPU many years ago).
Wolf gold has been the go to for inexpensive yet well made range and practice ammo. Prior to the election they were selling around $300 - $320/1000rds. Now they're $270 or so.
Sent from my XT1650 using Tapatalk
Last edited by Arik; 08-18-2017 at 08:50 AM.
|
08-18-2017, 10:09 AM
|
|
Member
|
|
|
Join Date: Jul 2016
Posts: 32
Likes: 1
Liked 10 Times in 6 Posts
|
|
I have around 350 rounds of Tulammo which I was told was made with the Wolf, I wonder if I should take caution when shooting those.
Sent from my SAMSUNG-SM-G935A using Tapatalk
|
08-18-2017, 10:13 AM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
Quote:
Originally Posted by fmcdaniel3
I have around 350 rounds of Tulammo which I was told was made with the Wolf, I wonder if I should take caution when shooting those.
Sent from my SAMSUNG-SM-G935A using Tapatalk
|
The other way around. Tula makes ammo for Wolf and sells under it's own name too.
Wolf ammo is a trademark of Sporting Supplies International out of California
Sent from my XT1650 using Tapatalk
|
08-18-2017, 10:15 AM
|
|
Member
|
|
|
Join Date: Jul 2016
Posts: 32
Likes: 1
Liked 10 Times in 6 Posts
|
|
Thanks, guess I will shot a few and see how they act, but then it only takes one to mess up your day.
Sent from my SAMSUNG-SM-G935A using Tapatalk
|
08-18-2017, 10:17 AM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
The warning was June 8th. I think if there was some serious problems the internet would be blowing up with all kinds of posts about damaged rifles
Sent from my XT1650 using Tapatalk
|
The Following User Likes This Post:
|
|
08-18-2017, 10:29 AM
|
|
Member
|
|
|
Join Date: Mar 2014
Location: New Hampshire
Posts: 2,847
Likes: 8,671
Liked 3,497 Times in 1,342 Posts
|
|
Keep your chamber clean for sure. I have shot a bit of Wolf and Tula in my early Sport with no trouble to report. However in a Savage .223, after just a few rounds, cases were very difficult to extract from its tighter chamber. Since then , I have been reluctant to shoot the balance of my Wolf 62gr ammo. If and when I do I will devote extra attention to the chamber cleaning.
Jim
Last edited by jimbo728; 08-18-2017 at 11:01 AM.
|
08-18-2017, 10:55 AM
|
Banned
|
|
|
Join Date: Apr 2015
Location: South Of The North Pole
Posts: 1,257
Likes: 491
Liked 710 Times in 424 Posts
|
|
I have been shooting WOLF steel case ammo since December '06 in my Sport I. And, in my AR-556 since early '16. I have not had ANY problems with it. I have close to 2K rounds of it and will keep shooting it as normal.
|
The Following User Likes This Post:
|
|
08-18-2017, 12:20 PM
|
|
Member
|
|
|
Join Date: Oct 2009
Posts: 14,661
Likes: 7,937
Liked 20,623 Times in 5,958 Posts
|
|
Talked to James at Wolf CS.
James says it's specific to the M&P 15. He said with all .223 Wolf sells they will usually get a couple reports total per year regarding out of battery discharge for all brands of rifles. But this year they have had seven out of battery reports with the M&P 15. James said it includes both steel and brass cased ammo. So... with the unusually high OOB reports they posted the advisory warning.
|
The Following 2 Users Like Post:
|
|
08-18-2017, 02:39 PM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: Central PA
Posts: 4,561
Likes: 8,223
Liked 11,460 Times in 3,026 Posts
|
|
Quote:
Originally Posted by ChattanoogaPhil
Talked to James at Wolf CS.
James says it's specific to the M&P 15. He said with all .223 Wolf sells they will usually get a couple reports total per year regarding out of battery discharge for all brands of rifles. But this year they have had seven out of battery reports with the M&P 15. James said it includes both steel and brass cased ammo. So... with the unusually high OOB reports they posted the advisory warning.
|
Which begs the question, have other ammo manufacturers reported an up swing in OOB discharges with MP-15 rifles?
Larry
|
08-18-2017, 02:42 PM
|
Member
|
|
|
Join Date: Nov 2005
Location: Upstate SC
Posts: 3,451
Likes: 37
Liked 5,436 Times in 1,762 Posts
|
|
They need someone who speaks English to write their advisories. The problem is "...evidenced by a LACK OF DAMAGE to the chamber and barrel extension" ??? They're saying that if everything looks OK, there's a problem!?
__________________
Pisgah
|
08-18-2017, 03:40 PM
|
|
Member
|
|
|
Join Date: Oct 2009
Posts: 14,661
Likes: 7,937
Liked 20,623 Times in 5,958 Posts
|
|
Quote:
Originally Posted by Pisgah
They need someone who speaks English to write their advisories. The problem is "...evidenced by a LACK OF DAMAGE to the chamber and barrel extension" ??? They're saying that if everything looks OK, there's a problem!?
|
There are two sentences.
"WOLF Performance Ammunition has received notifications relating to Smith & Wesson M&P-15 rifles that are discharging out of battery which is evidenced by a lack of damage to the chamber and barrel extension. <----------- This shows that the rifle’s bolt did not lock into the barrel, yet the hammer was still able to strike the firing pin to detonate the cartridge and cause a failure."
My guess is that not everything "looked ok" . Blown out magazines and probably receiver failures.
For inquiries or challenge their conclusions, Wolf can be reached at (888) 757-WOLF (9653)
Last edited by ChattanoogaPhil; 08-18-2017 at 03:59 PM.
|
The Following User Likes This Post:
|
|
08-18-2017, 06:26 PM
|
Member
|
|
|
Join Date: Sep 2011
Location: Anaheim, Ca
Posts: 926
Likes: 204
Liked 445 Times in 243 Posts
|
|
Is there something unique about an M&P 15 vs a normal milspec AR-15? Cause the bolt carrier and components should have dimensions such that the firing pin is not long enough to touch the primer unless the bolt is cammed to the locked position.
|
08-18-2017, 06:45 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
|
|
Quote:
Originally Posted by BlueOvalBandit
Is there something unique about an M&P 15 vs a normal milspec AR-15? Cause the bolt carrier and components should have dimensions such that the firing pin is not long enough to touch the primer unless the bolt is cammed to the locked position.
|
The firing pin is housed in the bolt. As long as the case head is 'flat' against the bolt face, the primer is in reach of the firing pin--regardless of whether the bolt has rotated and locked into the barrel extension, or even if bolt is only partially into the barrel extension.
|
08-18-2017, 06:59 PM
|
Member
|
|
|
Join Date: Sep 2011
Location: Anaheim, Ca
Posts: 926
Likes: 204
Liked 445 Times in 243 Posts
|
|
Quote:
Originally Posted by Steve912
The firing pin is housed in the bolt. As long as the case head is 'flat' against the bolt face, the primer is in reach of the firing pin--regardless of whether the bolt has rotated and locked into the barrel extension, or even if bolt is only partially into the barrel extension.
|
No, it doesn't. If you have a milspec AR 15 pull your carrier out and try. If it is the correct dimensions for all the parts it the firing pin by design CANNOT extend past the bolt face until the carrier is fully in battery.
Ned Christiansen did a cutaway to illustrate the fact. That bolt is locked into the lugs but the carrier is still slightly OOB.
You can read about it here.
How does AR15 bolt carrier prevent hammere-follow slam fire, when using hammer with notched top? - Page 1 - AR15.COM
?? For The Experts: Out Of Battery Discharge - What Prevents It? - AR15.COM
So my question still is, what makes the M&P different? Or is it just BS and bad ammo that Wolf is covering up.
Last edited by BlueOvalBandit; 08-18-2017 at 07:01 PM.
|
The Following 2 Users Like Post:
|
|
08-18-2017, 10:10 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
|
|
Quote:
Originally Posted by BlueOvalBandit
So my question still is, what makes the M&P different? Or is it just BS and bad ammo that Wolf is covering up.
|
I'll pull a BCA and take a look at it, eventually. I haven't seen many actions that aren't capable of ignition, less than 100% in battery.
Does the M&P carrier have the internal structure cited in your references?
|
08-18-2017, 11:19 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
|
|
There's mention on another firearm forum about a conversation with
"James" of Wolf:
A rep named James stated with all .223 Wolf sells they will usually get a couple reports total per year regarding out of battery discharge for all brands of rifles. But this year they have had seven out of battery reports with the M&P 15. James said it includes both steel and brass cased ammo.
Posting links to items on sale Amazon and Office Depot gets "infractions" here, so you'll have to use your Google-fu.
|
08-19-2017, 09:53 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: VA
Posts: 1,336
Likes: 467
Liked 2,047 Times in 648 Posts
|
|
Quote:
Originally Posted by Steve912
There's mention on another firearm forum about a conversation with
"James" of Wolf:
A rep named James stated with all .223 Wolf sells they will usually get a couple reports total per year regarding out of battery discharge for all brands of rifles. But this year they have had seven out of battery reports with the M&P 15. James said it includes both steel and brass cased ammo.
Posting links to items on sale Amazon and Office Depot gets "infractions" here, so you'll have to use your Google-fu.
|
You are most likely quoting me on TFL which is referencing ChattanoogaPhil from this thread.
Look up post #11
Quote:
Originally Posted by ChattanoogaPhil
Talked to James at Wolf CS.
James says it's specific to the M&P 15. He said with all .223 Wolf sells they will usually get a couple reports total per year regarding out of battery discharge for all brands of rifles. But this year they have had seven out of battery reports with the M&P 15. James said it includes both steel and brass cased ammo. So... with the unusually high OOB reports they posted the advisory warning.
|
I am with BlueOvalBandit on this one. An OOB firing cannot happen in a AR15 with a Milspec bolt that is within spec and not damaged in some way. That does not mean it never happens but when it does the rifle, specifically the BCG, or the ammo is out of spec.
If you look at Ned Christiansen cutaway photo provided by BlueOvalBandit you can see that in order for the ammo to be the cause of the OOB firing the primer would be so proud of the case that there is almost no way you would not notice it when loading the round into the magazine. IMHO.
__________________
Use should dictate gear!
Last edited by WVSig; 08-19-2017 at 10:01 AM.
|
The Following User Likes This Post:
|
|
08-19-2017, 05:31 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
|
|
So we're back to the same question:
Does the M&P 15 carrier have the same internal structure,
as referenced?
|
08-19-2017, 05:45 PM
|
|
Member
|
|
|
Join Date: Apr 2016
Posts: 101
Likes: 6
Liked 21 Times in 20 Posts
|
|
Maybe the increase in reported OOBs is simply due to 1000s more being sold since the drastic price drop?
Sent from my Pixel XL using Tapatalk
|
The Following User Likes This Post:
|
|
08-19-2017, 05:46 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: VA
Posts: 1,336
Likes: 467
Liked 2,047 Times in 648 Posts
|
|
Quote:
Originally Posted by Steve912
So we're back to the same question:
Does the M&P 15 carrier have the same internal structure,
as referenced?
|
We know very little about the M&P bolts or carriers. We know that they are not full auto bolt carriers. Some are not HPT/MPI marked. I believe some of the higher end ones are HP marked but the Sport IIs are not.
S&W will tell you almost nothing about the construction or manufacturing of the BCG. I personally have not heard any real issues with the S&W BCGs. I prefer full auto BCG but semi auto carriers work.
Even a semi auto bolt carrier should function in the same way. I wonder if there is just a run of defective BCG in some S&W guns which are just starting to show themselves. It could also be that the combination of the slightly out of spec S&W BCGs and Wolf ammo is a nexus of bad. The stacking of the 2 are causing an issue not see in other brands. Really it is all speculation.
If I owned a M&P15 I personally would look to other ammos because there are so many good rounds being sold in the sub $.30 range these days that it is not worth taking the chance. The other thing to do is call S&W and see what they say.
__________________
Use should dictate gear!
Last edited by WVSig; 08-19-2017 at 10:08 PM.
Reason: Steve912 has himself in a twist
|
08-19-2017, 05:51 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: VA
Posts: 1,336
Likes: 467
Liked 2,047 Times in 648 Posts
|
|
Quote:
Originally Posted by PeglegJones
Maybe the increase in reported OOBs is simply due to 1000s more being sold since the drastic price drop?
Sent from my Pixel XL using Tapatalk
|
A rise in the number of rifles sold would not increase the OOB firings unless the volume part has cause a slip in QC. An inspect AR15 should not be able to fire OOB. Does not matter if you have sold 1 to 1,000,000 in spec rifles the number of OOBs should be ZERO.
If they are selling guns which are out of spec.
__________________
Use should dictate gear!
|
The Following User Likes This Post:
|
|
08-19-2017, 07:16 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: So Cal (Near Edwards AFB)
Posts: 14,710
Likes: 2,926
Liked 17,102 Times in 6,271 Posts
|
|
Quote:
Originally Posted by WVSig
A rise in the number of rifles sold would not increase the OOB firings unless the volume part has cause a slip in QC. An inspect AR15 should not be able to fire OOB. Does not matter if you have sold 1 to 1,000,000 in spec rifles the number of OOBs should be ZERO.
|
I believe the point he was making is that if you have 1 failure with 10,000 rifles, it's not unreasonable to see 7 with 70,000 sold. So, the increased number of failures reported could indeed simply be because of an increase in sales.
However, I do agree that there should never be even the possibility of an out-of-battery discharge. I also agree that the specification of the bolt carrier and bolt (together they make the bolt carrier group or BCG) is such that it would have to be a dramatically jacked up BCG to fire out of battery.
I think this is a knee jerk reaction from Wolf. It sounds like they are simply trying to do a little CYA rather than actually investigating the situation and digging down to the root cause.
I don't have an M&P15 at the moment. Even so, I pulled the BCG out of an AR and examined the protrusion of the pin relative to the position of the bolt. There is no way on God's green earth that firing pin in my BCG could contact the primer on any round if the lugs are not locked. If the bolt has not rotated at least a little, the firing pin doesn't protrude at all from the bolt face. If it doesn't protrude from the bolt face, it can't fire.
Further, the number WVSig picked is a very interesting number. In the world of statistics, 3.4 failures per 1 million opportunities forms a failure curve that is 6 standard deviations from nominal. In other words, in the real world, it's about as close to perfect, or failure free, as any mechanical device can hope to get.
In my opinion, any gun that can actually fire out-of-battery, has a serious problem. Assuming that it's the gun's fault and not a stray piece of debris causing the failure, which is more likely than an out-of-battery ignition from a gun like the M&P15.
__________________
Freedom isn't free.
|
08-19-2017, 07:25 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
Quote:
Originally Posted by WVSig
A rise in the number of rifles sold would not increase the OOB firings unless the volume part has cause a slip in QC. An inspect AR15 should not be able to fire OOB. Does not matter if you have sold 1 to 1,000,000 in spec rifles the number of OOBs should be ZERO.
If they are selling guns which are out of spec.
|
Great movie
Sent from my XT1650 using Tapatalk
|
08-19-2017, 09:48 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
|
|
Quote:
Originally Posted by WVSig
We know very little about the M&P bolts. We know that they are not full auto bolt carriers.
|
CARRIER...not bolt. Compare the carrier internal structure,
between tail of bolt and flange of firing pin.
Well, go ahead and eyeball the bolt, too...low hanging fruit, easy to compare. Might was well throw the firing pin in, too.
Semi-auto and select fire carriers are different at back end...if carrier acts to prevent firing pin protrusion on an unlocked bolt, that's a feature that would not logically be exclusive to a semi- carrier.
|
08-19-2017, 10:10 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: VA
Posts: 1,336
Likes: 467
Liked 2,047 Times in 648 Posts
|
|
Quote:
Originally Posted by Steve912
CARRIER...not bolt. Compare the carrier internal structure,
between tail of bolt and flange of firing pin.
Well, go ahead and eyeball the bolt, too...low hanging fruit, easy to compare. Might was well throw the firing pin in, too.
Semi-auto and select fire carriers are different at back end...if carrier acts to prevent firing pin protrusion on an unlocked bolt, that's a feature that would not logically be exclusive to a semi- carrier.
|
Don't know much about either the bolt or carrier IMHO. All we know is that they are not HPT/MPI marked and they are semi auto and for the most part have run well which would lead one to believe that the overwhelming number of them are within spec and working properly.
I don't need to inspect anything because I don't own a M&P 15. I am only bringing this to the attention of the forum because it might help others.
I agree that there is a difference between full auto and semi auto carriers but it does not really tell us anything does it. Oh well hope it amounts to nothing for those who own M&P 15s and shoot Wolf ammo.
__________________
Use should dictate gear!
|
08-19-2017, 11:53 PM
|
|
Member
|
|
|
Join Date: Oct 2009
Posts: 14,661
Likes: 7,937
Liked 20,623 Times in 5,958 Posts
|
|
Quote:
Originally Posted by Rastoff
I believe the point he was making is that if you have 1 failure with 10,000 rifles, it's not unreasonable to see 7 with 70,000 sold. So, the increased number of failures reported could indeed simply be because of an increase in sales.
|
Think of the countless millions of rounds of .223 Wolf sells and all the autoloading rifles (not just AR platforms) from an endless list of manufactures that are already in circulation over past decades as well as new sales. With all that... Wolf told me they typically get a couple OOB reports a year. Now in the first half of this year they get seven OOB reports from a single manufacture, S&W. M&P sales volume can't explain that.
Last edited by ChattanoogaPhil; 08-19-2017 at 11:55 PM.
|
08-19-2017, 11:57 PM
|
Member
|
|
|
Join Date: Mar 2016
Posts: 6
Likes: 250
Liked 3 Times in 2 Posts
|
|
Has anyone contacted Smith&Wesson to get some feedback from them? I'll send them an e-mail and see what response, if any, I get back from them.
Last edited by Anti Psychotic; 08-20-2017 at 12:36 AM.
Reason: e-mail sent P.S I've got a couple cases of Wolf Gold too
|
The Following 2 Users Like Post:
|
|
08-20-2017, 12:08 AM
|
|
Member
|
|
|
Join Date: Oct 2009
Posts: 14,661
Likes: 7,937
Liked 20,623 Times in 5,958 Posts
|
|
Quote:
Originally Posted by Anti Psychotic
Has anyone contacted Smith&Wesson to get some feedback from them? I'll send them an e-mail and see what response, if any, I get back from them.
|
Let us know what they say.
A somewhat related side story.... Soon after S&W introduced the M&P 15-22 this forum was flooded with OOB reports. I don't recall S&W ever making a statement on the subject other than when they returned repaired rifles that had been sent in with blown off extractors and other damage, S&W would include a repair sheet "Updated to latest Spec". IIRC, it was close to two years before OOB reports slowed down. Course a .22lr OOB is not quite as exciting as a 5.56.
Last edited by ChattanoogaPhil; 08-20-2017 at 12:15 AM.
|
The Following 2 Users Like Post:
|
|
08-20-2017, 12:21 AM
|
|
Member
|
|
|
Join Date: Apr 2016
Posts: 101
Likes: 6
Liked 21 Times in 20 Posts
|
|
Yeah, non of the info on the 15-22 issue was ever very clear. Supposedly started at an Appleseed event with a participant having some issues and an official worked on the gun and then the OOB happened.
S&W never promulgated anything, as usual.
Sent from my Pixel XL using Tapatalk
|
08-20-2017, 01:54 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: So Cal (Near Edwards AFB)
Posts: 14,710
Likes: 2,926
Liked 17,102 Times in 6,271 Posts
|
|
Quote:
Originally Posted by ChattanoogaPhil
Wolf told me they typically get a couple OOB reports a year. Now in the first half of this year they get seven OOB reports from a single manufacture, S&W. M&P sales volume can't explain that.
|
Indeed, but without a proper statistical analysis we can't be sure there is a correlation between manufacturer and malfunction. It very well could be an anomaly, just simple chance that they've had 7 from the M&P line. It very well could have been 7 random AR15s. We just don't know.
Even so, the probability of 7 from any one manufacturer is surely low. Numbers are funny things. If not applied properly or analyzed properly, the wrong conclusions can be drawn. For example, it is possible that a significant correlation can be shown between the number of characters typed on the S&W Forum and the number of shooting fatalities in Chicago, but anyone with a brain can see that this cannot be real.
My only point in my last post was that there is a real connection between number of failures and sales volume. Does it account for this issue? Certainly not. Even so, I still believe that Wolf has done no real analysis and is just doing a knee jerk reaction. At the volume of .223/5.56 sales they do, losing the entire M&P15 market isn't going to significantly affect their bottom line. I may think their reaction is without analysis, but it's not the wrong way to go for them.
The only question left is, can there really be a flaw in the S&W design that doesn't show up in any other AR out there?
__________________
Freedom isn't free.
|
08-20-2017, 06:48 AM
|
Banned
|
|
|
Join Date: Apr 2015
Location: South Of The North Pole
Posts: 1,257
Likes: 491
Liked 710 Times in 424 Posts
|
|
Quote:
Originally Posted by Rastoff
The only question left is, can there really be a flaw in the S&W design that doesn't show up in any other AR out there?
|
Rastoff, IMHO, I think you may have hit upon something there.
Why now, why with an M&P15? Could S&W have "cut corners" somewhere due to increased sales of the M&P15?
Things that make you go, Hmmmmmm............
|
08-20-2017, 09:32 AM
|
US Veteran
|
|
|
Join Date: Feb 2012
Location: Wylie, TX
Posts: 4,670
Likes: 1,075
Liked 3,823 Times in 2,040 Posts
|
|
Quote:
Originally Posted by PeglegJones
Yeah, non of the info on the 15-22 issue was ever very clear. Supposedly started at an Appleseed event with a participant having some issues and an official worked on the gun and then the OOB happened.
S&W never promulgated anything, as usual.
Sent from my Pixel XL using Tapatalk
|
The Appleseed incident is fairly recent... The 15-22 OOB incidents that Phil is referring to is from 8 or 9 years ago, when the 15-22 first appeared. S&W changed out springs to alleviate the issue.
|
08-20-2017, 01:44 PM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,668
Likes: 1,841
Liked 5,427 Times in 2,737 Posts
|
|
OK, let's get a little perspective here. First and foremost, there are only a very limited number of sources for bolt carriers. Given their reputation, S&W isn't going to source their carriers from folks who produce scrap. NO AR builder makes all the parts-even Colt.
That said, manufacturing tolerance stack does exist and can cause problems.
Now let's get down to brass tacks. Prior to retirement, there was, several years ago, a number of over pressure events with a certain brand of US made new factory ammo. In the usual manner, ammo company blamed firearm manufacturer, and vice-versa, leaving the firearm owners in the lurch. When we had the problem, I talked my employers into sending ammo & firearm to HP White Laboratories. They actually wanted several firearms, close as possible in serial number. It was determined that it was an ammunition problem. Faced with this, the ammo company exchanged all our ammo, threw in extra and covered both repair costs and the HP White fee. "Bad" ammo does exist and can happen from any source.
If anyone really wants a definitive answer for YOUR event, there's your method. BTW, you're talking $1200-$1500.
I'll also note that over 40 years, I've personally seen about 6 OOB events. I do know that about half were Colts, so those who claim it's impossible with any particular brand aren't entirely correct.
Last edited by WR Moore; 08-20-2017 at 01:48 PM.
|
The Following User Likes This Post:
|
|
08-20-2017, 02:59 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: Forked River, NJ
Posts: 431
Likes: 31
Liked 164 Times in 103 Posts
|
|
If it were the M&P with the problem, wouldn't other ammunition companies also be issuing the same warning. Why just Wolf?
Does the M&P 15 different models come with the same BCG? Wolf is not saying problems with the Sport or OR , etc.... model, but all M&P 15's.
We on the forum are thinking the problem is possibly the BCG, but for Wolf to make a blanket statement without documentation for all to see is speculation and innuendo.
|
08-20-2017, 04:00 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
Quote:
Originally Posted by rtquig
for Wolf to make a blanket statement without documentation for all to see is speculation and innuendo.
|
Possibly but I don't think they're in business to scare away customers. Obviously they have some kind of documentation. Since they're not talking about another company but their own they don't need to show or provide anything. Many gun manufacturers list ammo they advise against with no problems. People just take their word for it.
Sent from my XT1650 using Tapatalk
|
08-20-2017, 05:17 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: Forked River, NJ
Posts: 431
Likes: 31
Liked 164 Times in 103 Posts
|
|
I think they are CYA for something specific that happened. I agree many manufacturers warn about certain ammunition (S&W M&P22 for example), but I also think as already been stated that the number of increased M&P sales correlates with any type of defect.
I would be more comfortable if Wolf had stated the other manufacturers firearms that experienced this problem even though according to them the number of problems are lower.
Anyone that deals with statistics knows they can be made to read in favor of what outcome you want.
There could very well be a problem, I myself doubt it is an M&P issue, but the statement from Wolf is too vague to point a finger.
|
08-20-2017, 09:48 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: So Cal (Near Edwards AFB)
Posts: 14,710
Likes: 2,926
Liked 17,102 Times in 6,271 Posts
|
|
Quote:
Originally Posted by WR Moore
I'll also note that over 40 years, I've personally seen about 6 OOB events. I do know that about half were Colts, so those who claim it's impossible with any particular brand aren't entirely correct.
|
In the OOB events you saw, what was the damage to the gun? Wolf is stating that there was no damage to the chamber or lugs. They're claiming that that means it was not locked. I can't say I disagree with that, but the only way any of my ARs could fire that way would be for the cam pin to shear off or not be installed. I could see a user forgetting to put the cam pin in, but I can't see a scenario where the cam pin shears off.
Quote:
Originally Posted by rtquig
If it were the M&P with the problem, wouldn't other ammunition companies also be issuing the same warning. Why just Wolf?
|
This is an excellent question. If it were a S&W M&P problem, it would be all over the web and with every type of ammo. With the thousands of M&P15s sold there must be millions of rounds fired. Yet, we've never heard of this issue here prior to this alert.
Quote:
Originally Posted by rtquig
Anyone that deals with statistics knows they can be made to read in favor of what outcome you want.
|
People say this, but it's mostly said from those that don't know statistics. Unless the statistician is being dishonest, the numbers don't lie. Like I said earlier, you have to start with things that make sense to begin with, but if you're honest with the numbers, statistics works. I've seen it too many times. It's unfortunate that people disregard statistics just because they don't understand it.
__________________
Freedom isn't free.
|
08-21-2017, 10:20 AM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,668
Likes: 1,841
Liked 5,427 Times in 2,737 Posts
|
|
Rastoff-I didn't do detailed examinations, but generally, the BCG had partially recoiled, the case was ruptured, venting gas into the mag well. The magazine internals and all remaining ammo blew out and the BCG wouldn't move. Most were cleared fairly quickly. It isn't uncommon for the extractor to get blown off the bolt, which was the case in the worst one I saw. One that one, we needed a brass rod and hammer to get the BCG moving so the case could be extracted and the upper opened. In that last case, the rifle was running the next weekend, so substantial damage seems real unlikely. I expect I discussed it with the owner, but that was .....decades ago.
Now, late last night it dawned upon me that what we might be discussing might in fact be caused by the bolt unlocking outside the design envelope (early).
The AR operates by differential gas expansion. It depends upon the bolt being fully locked and the gas pressure at the gas port being within a certain range. [The burn rate of the powder might also have some affect, similar to issues with the M1 Garand. The use of powders outside the Garand design envelope results in bent operating rods and other ills. Recall that the AR was designed & developed with IMR stick type powder.] If for some reason, the bolt isn't absolutely, completely rotated to full lock, the dwell time of the system will be affected (reduced). Now, add to this the possibility of higher than optimal/normal gas port pressure and duration of the pressure peak and you have the possibility of the bolt unlocking before chamber pressure has dropped to a safe level. Depending upon pressures within the BCG, it might happen with a fully locked bolt. Resulting in a ruptured case etc.
We've got no clue what powders Wolf is using in their ammo. Could be they've lately used a powder that's....less than optimal for the AR system.
Last edited by WR Moore; 08-21-2017 at 10:31 AM.
|
The Following 2 Users Like Post:
|
|
08-21-2017, 11:11 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: Forked River, NJ
Posts: 431
Likes: 31
Liked 164 Times in 103 Posts
|
|
Quote:
Originally Posted by Rastoff:
Anyone that deals with statistics knows they can be made to read in favor of what outcome you want.
People say this, but it's mostly said from those that don't know statistics. Unless the statistician is being dishonest, the numbers don't lie. Like I said earlier, you have to start with things that make sense to begin with, but if you're honest with the numbers, statistics works. I've seen it too many times. It's unfortunate that people disregard statistics just because they don't understand it.
__________________
Freedom isn't free.
I have worked with statistics for years, and yes you are right, if given all the facts and figures provided you should come to the same conclusion as the guy sitting next to you.
Having seen numbers thrown out of the equation as they didn't match the other numbers in that row, or just simply leaving out rows of numbers can change the outcome. It is like a presidential poll- which numbers do we go by, the ones that read what we want, or the numbers that show actual facts.
I had to every 5 years come up with how much water consumption our town would use to justify the amount permitted by the state that let us take water out of the ground. (example) Well, in the next years a big low income housing project will be here and add 1,000 customers to the list of water consumed. Never saw the project started since it was permitted to be built, yet the state said okay, you justified your water use and are permitted to take it.
Last edited by rtquig; 08-21-2017 at 11:15 AM.
|
The Following User Likes This Post:
|
|
08-21-2017, 12:03 PM
|
Member
|
|
|
Join Date: Mar 2016
Posts: 6
Likes: 250
Liked 3 Times in 2 Posts
|
|
This is the e-mail I sent to S&W. Hope it doesn't sound too snarky as that was not my intent. Any response from S&W will shared in this thread. Disclosure: I have 2+ cases of wolf gold .223 and so far have about 500 rounds through my Sport II with no problems (its accurate in my rifle too).
"Good Morning,
I have a question about the M&P 15 rifle and its reported incompatibility with Wolf Gold (brass cased .223) Ammunition. As I'm sure you know there is a advisory from the Wolf Ammo Mfg. specifically mentioning the use of their ammo with the M&P 15 platform. No other rifle manufacturer is specified. As the owner of an M&P 15 rifle I believe there is a legitimate concern with any out of battery conditions that may be present with this rifle, Bolt Carrier Group and or barrel extension? Curious that only the M&P 15 rifle is specified by this ammo manufacturer.
Thanks in advance for your response,
Sincerely,
**** ****** "
(I tried to include the advisory that WVSig shared in his OP but it wouldn't go thru in the e-mail I sent to S&W)
|
08-21-2017, 02:09 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: Forked River, NJ
Posts: 431
Likes: 31
Liked 164 Times in 103 Posts
|
|
Hopefully we will get a no B.S. answer from S&W. I would think it would be in their interest to address this allegation.
I would certainly be more comfortable with information from Wolf stating Model, age/year purchased and not just a problem with S&W M&P.
|
The Following User Likes This Post:
|
|
08-21-2017, 02:11 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
Quote:
Originally Posted by rtquig
Hopefully we will get a no B.S. answer from S&W. I would think it would be in their interest to address this allegation.
I would certainly be more comfortable with information from Wolf stating Model, age/year purchased and not just a problem with S&W M&P.
|
They may not have that if all it is is people calling in to report
OR..... something much more simpler.....buy different ammo!
Sent from my XT1650 using Tapatalk
|
The Following User Likes This Post:
|
|
08-21-2017, 02:38 PM
|
|
Member
|
|
|
Join Date: Apr 2016
Posts: 101
Likes: 6
Liked 21 Times in 20 Posts
|
|
I would be surprised if S&W even responds. If they do it will probably be a non-committal boilerplate response se.
Sent from my Pixel XL using Tapatalk
|
The Following User Likes This Post:
|
|
08-21-2017, 07:34 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: Forked River, NJ
Posts: 431
Likes: 31
Liked 164 Times in 103 Posts
|
|
Quote:
Originally Posted by Arik
They may not have that if all it is is people calling in to report
OR..... something much more simpler.....buy different ammo!
Sent from my XT1650 using Tapatalk
|
If all they have is people calling into report, we wouldn't know if it is true of fake. I don't think Wolf would respond with a "thanks for the call" and not take information. I don't shoot Wolf, have no beef with their ammunition and would shoot it in my Sport.
|
08-21-2017, 07:55 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
|
|
I simply don't think many people know those answers. I know I don't and never cared. I THINK I bought my rifle 5 years ago and it's probably from the 80s (not an M&P).
Sent from my XT1650 using Tapatalk
|
08-21-2017, 08:58 PM
|
|
Member
|
|
|
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
|
|
Quote:
Originally Posted by Arik
They may not have that if all it is is people calling in to report
OR..... something much more simpler.....buy different ammo!
|
Or a different brand/make/model of .223 / 5.56 projectile launcher.
__________________
-John
|
08-21-2017, 09:01 PM
|
US Veteran
|
|
|
Join Date: Feb 2012
Location: Wylie, TX
Posts: 4,670
Likes: 1,075
Liked 3,823 Times in 2,040 Posts
|
|
Quote:
Originally Posted by JaPes
Or a different brand/make/model of .223 / 5.56 projectile launcher.
|
Hater!
|
The Following User Likes This Post:
|
|
|
|
Posting Rules
|
|
|
|
|