|
|
07-14-2013, 03:58 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
A question for SD owners: Galloway Guide Rods
Comments made in another thread about possible problems resulting from using aftermarket recoil spring guide rod assemblies in SD series pistols made me wonder...how many have ACTUALLY had a problem that they could directly attribute to using an aftermarket guide rod assembly? I guess the best way you could actually pinpoint guide rod assembly problems are if malfunctions occur with the aftermarket assembly in the gun, and they don't occur with the stock assembly in the gun.
I replaced the stock guide rod assembly with the stainless steel 17lb assembly from Galloway Precision. (I kept my stock assembly, of course.) From what I have read on other threads, the stock weight is 18lbs. (?)
Anyone having any problems with Galloway guide rod assemblies?
|
07-14-2013, 04:58 PM
|
Member
|
|
|
Join Date: Jul 2013
Location: North Carolina
Posts: 13
Likes: 2
Liked 0 Times in 0 Posts
|
|
Galloway replacement Slide Rod & Spring
I just purchased a few days ago the new S&W SD40VE.. I ordered the Galloway replace SS steel Rod w/20# spring. When I installed it the spring sticks out past the barrel about 1/8 to 1/4 in.. looks stupid.. Has anybody had issues like this ?
|
07-14-2013, 05:07 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by JoeCap
I just purchased a few days ago the new S&W SD40VE.. I ordered the Galloway replace SS steel Rod w/20# spring. When I installed it the spring sticks out past the barrel about 1/8 to 1/4 in.. looks stupid.. Has anybody had issues like this ?
|
Do you mean the button head screw sticks out? Only the button head screw stuck out in my Galloway assembly. If part of the rod sticks out, it could be for a different pistol.
__________________
Audemus jura nostra defendere
|
07-14-2013, 05:14 PM
|
Member
|
|
|
Join Date: Jul 2013
Location: North Carolina
Posts: 13
Likes: 2
Liked 0 Times in 0 Posts
|
|
Galloway Steel Rod
Yes, the Button head sticks out.
|
07-14-2013, 05:17 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
The button head sticks out a little on mine too...I don't think it looks bad.
|
07-14-2013, 06:47 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
If you compare the stiffness of the original recoil spring with the 17lb Galloway by putting each one in the SD40VE, you will find that the slide is more difficult to rack with the original spring in it.
When I initially got the gun, I fired off 150 rounds without any problems. After I replaced the the recoil assembly with the Galloway, I had 4 misfires out of 150. I found some metal debris from the machining process in my striker channel and attributed the misfires to that.
The next time I went to the range, 1 out of 150 misfired when the gun failed to go completely into battery. I fear the 17lb Galloway spring is either not producing the spec force or it was meant more for the SD9VE.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-14-2013 at 07:00 PM.
|
07-14-2013, 06:57 PM
|
Member
|
|
|
Join Date: Dec 2012
Location: PA.
Posts: 607
Likes: 440
Liked 121 Times in 94 Posts
|
|
Galloway recommends the 20 or 22# spring for the .40, I" m guessing as upper limit's.
Going to email them to get some better explanations.
3
Last edited by 3hounds; 07-15-2013 at 10:53 AM.
Reason: Not sure I understood galloway's website
|
07-14-2013, 07:03 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by 3hounds
Galloway recommends the 20 or 22# spring for the .40.
3
|
It can be confusing because this what their website says: "Custom made for the SD-VE and Sigma VE pistols these guiderods are made of Stainless and come pre-assembled to your selection. Factory spring rates are 17lb for both the 9mm and 40 models. We offer several rates as well as options on the retainer finish, black or polished stainless. We recommend the 20 or 22 for 40s/w pistols and 20 for the 9mm as upper limits. The 15 for light handloads only."
They say factory spring rates are 17lb and I wanted to stay with factory specs. They also say 20 or 22 for the 40 are recommended as upper limits.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-14-2013 at 07:07 PM.
|
07-15-2013, 12:55 AM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: West Ga
Posts: 1,133
Likes: 428
Liked 453 Times in 235 Posts
|
|
Quote:
Originally Posted by 3hounds
Galloway recommends the 20 or 22# spring for the .40.
3
|
Why do you think that is when the factory 18# works perfect?
|
07-15-2013, 01:24 AM
|
Member
|
|
|
Join Date: May 2013
Location: Denver area
Posts: 6,269
Likes: 20,318
Liked 13,157 Times in 4,191 Posts
|
|
Guide rods are unnecessary embellishments.
I wouldn't buy a 1911 with one, and if given a 1911 with one would get rid of it.
They look neet but serve no function other than to prevent a proper press-check and add weight. ) ,
A gizmo that solves a non existent problem and ( like most gizmos) , at a cost.
Avoid them.
|
The Following User Likes This Post:
|
|
07-15-2013, 01:49 AM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by Rpg
Guide rods are unnecessary embellishments.
I wouldn't buy a 1911 with one, and if given a 1911 with one would get rid of it.
They look neet but serve no function other than to prevent a proper press-check and add weight. ) ,
A gizmo that solves a non existent problem and ( like most gizmos) , at a cost.
Avoid them.
|
I think you must mean a Full Length Guide Rod in a 1911, as opposed to a GI guide rod and plug, again in a 1911. I agree with you...and prefer the GI guide rod and plug versus the FLGR myself, in my full size 1911s.
The issue we are discussing here is the recoil spring guide assembly for a SD9VE (or a SD40VE), which consists of the guide rod and recoil spring in a captive unit. The stock unit has a polymer guide rod...the Galloway unit has a stainless steel guide rod. A recoil spring and guide rod assembly is necessary for this pistol to function...whether it is the stock assembly or an aftermarket assembly.
|
The Following User Likes This Post:
|
|
07-15-2013, 10:50 AM
|
Member
|
|
|
Join Date: Dec 2012
Location: PA.
Posts: 607
Likes: 440
Liked 121 Times in 94 Posts
|
|
Quote:
Originally Posted by modraker
It can be confusing because this what their website says: "Custom made for the SD-VE and Sigma VE pistols these guiderods are made of Stainless and come pre-assembled to your selection. Factory spring rates are 17lb for both the 9mm and 40 models. We offer several rates as well as options on the retainer finish, black or polished stainless. We recommend the 20 or 22 for 40s/w pistols and 20 for the 9mm as upper limits. The 15 for light handloads only."
They say factory spring rates are 17lb and I wanted to stay with factory specs. They also say 20 or 22 for the 40 are recommended as upper limits.
|
Yes it can be confusing, I'm going to edit my post above.
AS you said 20 or 22 for the 40S/W pistols and 20 for 9mm.
It also say's as upper limits, I guess that means the 40 and 9mm ?
They also have the factory spring rated as a 17# spring.
I'm going to email them and see what I can find out.
3
Last edited by 3hounds; 07-15-2013 at 11:22 AM.
|
07-15-2013, 11:25 AM
|
Member
|
|
|
Join Date: Dec 2012
Location: PA.
Posts: 607
Likes: 440
Liked 121 Times in 94 Posts
|
|
Quote:
Originally Posted by J Rich
Why do you think that is when the factory 18# works perfect?
|
I'm guessing that's for heavier and hotter ammo.
I emailed them some questions, I'll let ya know when I hear from them.
3
|
The Following User Likes This Post:
|
|
07-15-2013, 06:30 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
My S&W-Galloway Hybrid
Suspecting that the 17-lb Galloway spring is too weak for my SD40VE but unwilling to relinquish my desire to have a stainless steel guide rod, I have assembled a hybrid. I took the original recoil spring from my SD40VE and installed it in my Galloway guide rod. It looks good and feels good. So off to the range I go in a couple of days to test my little Frankenstein.
__________________
Audemus jura nostra defendere
|
07-15-2013, 10:16 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by modraker
Suspecting that the 17-lb Galloway spring is too weak for my SD40VE but unwilling to relinquish my desire to have a stainless steel guide rod, I have assembled a hybrid. I took the original recoil spring from my SD40VE and installed it in my Galloway guide rod. It looks good and feels good. So off to the range I go in a couple of days to test my little Frankenstein.
|
Was it difficult to do? Please let us know how it works out!
|
07-15-2013, 11:26 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by GKC
Was it difficult to do? Please let us know how it works out!
|
Yes, I will report on how it goes at the range.
Here's what I did. I pulled back the spring using the jaws of a vise grip and clamped down on the plastic guide rod. Unable to remove the cap by rotating or pulling, I put the hacksaw to it. Obviously, there's no turning back at this point. Then, I released the vise grip and removed the spring. A word of caution, when releasing the vise grip, make sure the flange end of the guide rod is pointing at something that doesn't easily break.
Using the same method to pull back the spring and clamp down on the stainless steel rod, I removed the button head screw with an allen wrench. I exchanged the springs which happily have the same inside diameters.
Now comes the hardest part. I manually had to pull back this stiffer spring to clamp the vise grip on to the stainless steel guide rod. After that, it was downhill. I put some blue loctite into the screw hole and reinstalled the button head.
__________________
Audemus jura nostra defendere
|
07-15-2013, 11:49 PM
|
Member
|
|
|
Join Date: Mar 2013
Location: Middleburg, Florida
Posts: 36
Likes: 15
Liked 21 Times in 8 Posts
|
|
I purchased the Galloway stainless guide rod, 17#, and the Galloway trigger kit. I also put Meprolite sights on my SW40VE. I must say that I am very happy with the results. I will not be changing anything on my SW40VE.
The trigger pull is right about 6 lb, and smooth. I have been firing Federal 180gr and everything has worked great. Overall, I am very happy with the results.
|
07-16-2013, 12:17 AM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by truckinjames
I purchased the Galloway stainless guide rod, 17#, and the Galloway trigger kit. I also put Meprolite sights on my SW40VE. I must say that I am very happy with the results. I will not be changing anything on my SW40VE.
The trigger pull is right about 6 lb, and smooth. I have been firing Federal 180gr and everything has worked great. Overall, I am very happy with the results.
|
Congratulations on finding a combination that works well for you. Do you find that shooting the 180gr on a 17lb spring produces a substantial recoil? Is it easy enough to quickly realign the sights for the next shot?
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-16-2013 at 02:16 PM.
|
07-16-2013, 11:17 AM
|
Member
|
|
|
Join Date: Jul 2013
Location: North Carolina
Posts: 13
Likes: 2
Liked 0 Times in 0 Posts
|
|
Galloway Guide Rods & Spring
Let me tell you, I been having the best customer service from Debbie at Galloway. I been working with them on the Rod size for the lastest S&W SD40VE .
AS commented above, the one they sent was too long and the button end stuck out of the slide.
The stock factory was 2in & 940/1000th.... the one they sent was 2in & 975/1000th.
They made one and sent it out same day. There is a difference with the older SD's .
|
07-16-2013, 02:04 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by JoeCap
Let me tell you, I been having the best customer service from Debbie at Galloway. I been working with them on the Rod size for the lastest S&W SD40VE .
AS commented above, the one they sent was too long and the button end stuck out of the slide.
The stock factory was 2in & 940/1000th.... the one they sent was 2in & 975/1000th.
They made one and sent it out same day. There is a difference with the older SD's .
|
My Galloway recoil assembly measures 2.987" end to end and here's what the button head looks like:
If the button head were to be positioned partly inside the slide hole, I wouldn't want the leading edge of the slide hole to possibly catch the bottom of the button head as the slide goes back into battery. So, I would prefer to keep the button head completely out of the slide's front surface. But that's just me.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-16-2013 at 08:25 PM.
|
07-16-2013, 04:20 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by modraker
Here's what I did. I pulled back the spring using the jaws of a vise grip and clamped down on the plastic guide rod. Unable to remove the cap by rotating or pulling, I put the hacksaw to it. Obviously, there's no turning back at this point. Then, I released the vise grip and removed the spring. A word of caution, when releasing the vise grip, make sure the flange end of the guide rod is pointing at something that doesn't easily break.
Using the same method to pull back the spring and clamp down on the stainless steel rod, I removed the button head screw with an allen wrench. I exchanged the springs which happily have the same inside diameters.
Now comes the hardest part. I manually had to pull back this stiffer spring to clamp the vise grip on to the stainless steel guide rod. After that, it was downhill. I put some blue loctite into the screw hole and reinstalled the button head.
|
Thanks for that explanation...if I decide to try it, I will first order a stock recoil spring assembly from S&W. I guess you can buy them...I couldn't see how to order them on the S&W website.
I may see if I can send my Galloway guide back to them, and have them remake it with an 18lb spring. Mine does extend from the end of the slide, so I don't know if they can do anything about that too...or if it would take a new rod.
|
07-16-2013, 05:21 PM
|
Member
|
|
|
Join Date: Mar 2013
Location: Middleburg, Florida
Posts: 36
Likes: 15
Liked 21 Times in 8 Posts
|
|
Modraker, I was taught to shoot using the Weaver stance, point shoot with the front sight at center mass when I went to the police academy back in the late 80's. So for me, sight realignment is not a problem. The recoil to me isn't that bad.
|
The Following 2 Users Like Post:
|
|
07-16-2013, 05:46 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by GKC
Thanks for that explanation...if I decide to try it, I will first order a stock recoil spring assembly from S&W. I guess you can buy them...I couldn't see how to order them on the S&W website.
I may see if I can send my Galloway guide back to them, and have them remake it with an 18lb spring. Mine does extend from the end of the slide, so I don't know if they can do anything about that too...or if it would take a new rod.
|
The Smith & Wesson SD-VE parts list is, so far, an internet no show. Even Brownells doesn't appear to carry parts for it yet.
If your gun is a SD9VE, I don't think the 17# spring (if it truly produces 17 lbs of force) is going to create problems for you. Besides, Galloway offers only 15#, 17#, 20# and 22# springs.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-18-2013 at 02:02 PM.
|
The Following User Likes This Post:
|
|
07-16-2013, 06:06 PM
|
Member
|
|
|
Join Date: Jul 2012
Location: NJ
Posts: 54
Likes: 0
Liked 14 Times in 12 Posts
|
|
I tried to order a spare trigger return spring for a SD9VE and the S&W rep told me that they don't have a parts list yet for them and you cant order any spare parts.The gun has to be shipped back to them for any parts to be repaired .This was a month ago when I called.
|
The Following User Likes This Post:
|
|
07-17-2013, 11:16 AM
|
Member
|
|
|
Join Date: Jul 2013
Location: North Carolina
Posts: 13
Likes: 2
Liked 0 Times in 0 Posts
|
|
Eric owner of Galloway..
FYI.. Eric just called me to talk about the Guide Rods being a tat to long on the new S&W SD-VE's..
He recognized the issue and will be making new Rods 30/1000 shorter. He asked that anyone with one sticking out to far , to get with him for a free replacement & free mailer to send the other back..
Peace
|
07-17-2013, 02:10 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by JoeCap
FYI.. Eric just called me to talk about the Guide Rods being a tat to long on the new S&W SD-VE's..
He recognized the issue and will be making new Rods 30/1000 shorter. He asked that anyone with one sticking out to far , to get with him for a free replacement & free mailer to send the other back..
Peace
|
I sent him an e-mail...their website says they aren't taking calls.
Is the issue of the rod being too long and sticking out of the slide merely cosmetic, or is it a possible functional problem?
|
07-17-2013, 02:16 PM
|
Member
|
|
|
Join Date: Jul 2013
Location: North Carolina
Posts: 13
Likes: 2
Liked 0 Times in 0 Posts
|
|
No. It won't cause Functional Damage. I have already fired my .40 with the Rod & Handgun worked & responded just fine.. The only reason he is making the new shorter rod , is just to make it right. The factory didn't stick out , so why should Galloway's.. Again, GREAT CUSTOMER SERVICE FROM GALLOWAY... Eric & his wife Debbie....
|
07-17-2013, 03:12 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by JoeCap
The factory didn't stick out , so why should Galloway's.
|
The factory recoil assembly does stick out on mine...perhaps not quite as much as the Galloway rod does, but it's not flush. I'll try to take some pictures later.
If it's not a functional problem, I may just keep what I have. The stock assembly sure does feel "flimsy" by comparison.
|
07-17-2013, 03:15 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by JoeCap
FYI.. Eric just called me to talk about the Guide Rods being a tat to long on the new S&W SD-VE's..
He recognized the issue and will be making new Rods 30/1000 shorter. He asked that anyone with one sticking out to far , to get with him for a free replacement & free mailer to send the other back..
Peace
|
Thank you for this info, JoeCap. I put a feeler gauge between the slide face and the bottom of the screw head and it measures a mere .010" (10/1000 inch). That's fine for my particular SD40VE.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-17-2013 at 03:19 PM.
|
07-19-2013, 08:59 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Clark County Shooting Park Range Report
Quote:
Originally Posted by GKC
Was it difficult to do? Please let us know how it works out!
|
SD40VE modified as follows:
- Galloway Precision stainless steel guide rod with original S&W recoil spring
- Apex Tactical spring kit to produce 6 lb trigger
- M&P 3-dot night sights
150 rounds of Speer Lawman 40SW 165gr FMJ --- Zero Malfunction
I love this gun!
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-20-2013 at 04:42 AM.
|
07-26-2013, 01:24 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
I heard from Eric at Galloway Precision. He said that the longer rod was merely a cosmetic issue and not a functional one, but they want their customers to be happy so they are offering correct-length replacements. He is mailing me a correct length guide rod assembly, with a mailing envelope to return the too-long assembly. I asked for one in black stainless this time.
|
07-26-2013, 05:36 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Las Vegas, NV
Posts: 282
Likes: 62
Liked 56 Times in 39 Posts
|
|
Quote:
Originally Posted by GKC
I asked for one in black stainless this time.
|
Could you post a photo when you get it assembled? I am interested in how it looks with the shorter rod. Thanks.
__________________
Audemus jura nostra defendere
Last edited by modraker; 07-26-2013 at 08:03 PM.
|
07-27-2013, 02:49 AM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by modraker
Could you post a photo when you get it assembled? I am interested in how it looks with the shorter rod. Thanks.
|
I need to take a picture of it now...I don't have a set of feeler gauges, but the current Galloway rod does stick out a bit. Then I'll take a picture of the new rod installed in the slide for comparison.
I'm kinda having mixed feelings now about asking for the black stainless rod...but, the stock rod was black, so it won't look out of place. The stainless rod was much brighter than the slide anyway, so it's not like it was an absolute match.
|
07-27-2013, 06:15 AM
|
|
Member
|
|
|
Join Date: Jun 2013
Posts: 168
Likes: 47
Liked 55 Times in 37 Posts
|
|
Quote:
Originally Posted by GKC
I need to take a picture of it now...I don't have a set of feeler gauges, but the current Galloway rod does stick out a bit. Then I'll take a picture of the new rod installed in the slide for comparison.
I'm kinda having mixed feelings now about asking for the black stainless rod...but, the stock rod was black, so it won't look out of place. The stainless rod was much brighter than the slide anyway, so it's not like it was an absolute match.
|
You could polish the crown of your barrel (and barrel hood to finish the look) to match the polished rod.
|
07-27-2013, 10:27 AM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
|
|
Quote:
Originally Posted by Short Bus Driver
You could polish the crown of your barrel (and barrel hood to finish the look) to match the polished rod.
|
Ah well....Eric has already sent the black stainless one, so I'll see how it looks. Worst case, I could buy another one in "silver" stainless, and alternate them...one for dress up, one for work...
|
07-10-2015, 10:15 PM
|
Member
|
|
|
Join Date: Jul 2015
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
Can anyone tell me.
I purchased the 20lb guide rod for my sd9ve and so far its done great. However my question relates to the plastic molding it sits in with in the lower. S&W contact senter couldn't even tell me. The question is will the molding hold up to the stress of the new lb rate. I did read that 115gr 9mm ammo produces 346fpsi so racking has been fine and i have about 2 stove pipes out of 300 rounds. Thanks!
|
07-10-2015, 11:25 PM
|
|
Member
|
|
|
Join Date: Dec 2014
Location: Oklahoma
Posts: 951
Likes: 682
Liked 301 Times in 210 Posts
|
|
What measure is "fpsi"?
|
07-11-2015, 07:41 AM
|
Member
|
|
|
Join Date: Jun 2015
Location: Florida
Posts: 39
Likes: 5
Liked 33 Times in 14 Posts
|
|
Quote:
Originally Posted by ou1954
What measure is "fpsi"?
|
pfsi is pound-force square inch, not sure of fpsi, possibly foot-pounds square inch which doesn't make sense, so I'm going with...typo.
|
07-11-2015, 03:31 PM
|
|
Member
|
|
|
Join Date: Dec 2014
Location: Oklahoma
Posts: 951
Likes: 682
Liked 301 Times in 210 Posts
|
|
The number you quote, 346, is more than likely the bullet energy as it leaves the muzzle.
The Muzzle Energy is specified in ft·lb and is independent of area. If so, the area, sq in isn't part of the measurement.
The value 346 is in clearly in the range of various ballistics tables for the Parabellum cartridge. Perhaps that's the term you are referring to.
And, of course, the higher the number, mostly likely the chamber pressure and recoil force will both be higher.
|
07-16-2015, 07:06 PM
|
Member
|
|
|
Join Date: Dec 2013
Posts: 62
Likes: 16
Liked 29 Times in 14 Posts
|
|
My SD40VE sports a 22lb Galloway Guide Rod.
No malfunctions w/ 180 grain factory loads. So far so good, over 250 rounds.
|
07-20-2015, 01:56 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Posts: 321
Likes: 79
Liked 105 Times in 55 Posts
|
|
Don't waste your cash on Galloway Guide rods, you can get a stainless steel guide rod for a Glock 17 and they work great at probably half the price.
__________________
This Signature is too Short!
|
|
Posting Rules
|
|
|
|
|