|
|
05-03-2010, 11:38 AM
|
Member
|
|
|
Join Date: Apr 2010
Posts: 12
Likes: 0
Liked 0 Times in 0 Posts
|
|
Model 52 disassembly instructions
I would like to be able to disassemble my 52-1. Reasons for this are:
To increase the trigger pull weight. It is now at 2lbs and needs to go to 2.5lbs to be legal in bullseye.
To understand how to replace the extractor, should that ever be necessary. It's fine now, but I want to know how to do it.
Does anyone have instructions on how to disassemble the 52-1 so I can do those things. I can do it on a 1911, and expect that the 52 is not altogether different, but would like step by step instructions if anyone has them.
|
05-03-2010, 12:19 PM
|
|
Member
|
|
|
Join Date: Jul 2005
Location: NC
Posts: 30,716
Likes: 58,627
Liked 53,386 Times in 16,638 Posts
|
|
__________________
Sure you did
Last edited by ladder13; 05-03-2010 at 12:31 PM.
|
05-03-2010, 12:49 PM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: Suburban Deeeetroit
Posts: 2,282
Likes: 80
Liked 1,417 Times in 683 Posts
|
|
Quote:
Originally Posted by macarthur
I would like to be able to disassemble my 52-1. Reasons for this are:
To increase the trigger pull weight. It is now at 2lbs and needs to go to 2.5lbs to be legal in bullseye.
To understand how to replace the extractor, should that ever be necessary. It's fine now, but I want to know how to do it.
Does anyone have instructions on how to disassemble the 52-1 so I can do those things. I can do it on a 1911, and expect that the 52 is not altogether different, but would like step by step instructions if anyone has them.
|
I don't believe you'll find anything regarding the trigger pull weight adjustment in the basic manual that was included with the model 52.
You may have to call S&W.
Check this thread : ignore the mention of the 952 the 52 is also discussed in it
Model 952 trigger pull adjustment - anyone up on this?
Last edited by 505Gibbs; 05-03-2010 at 01:11 PM.
|
05-03-2010, 01:36 PM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,609
Likes: 2,305
Liked 3,537 Times in 1,502 Posts
|
|
The NRA Firearms Assembly book on Pistols and Revolvers will have the information to help you regarding your Model 52. I doubt that you will find enough information to help you increase the weight on your pistol, but you might. You can get a used copy of the book here: Amazon.com: Used and New: Firearms Assembly : The NRA Guide to Pistols and Revolvers, Item# 01590
|
05-03-2010, 02:26 PM
|
Member
|
|
|
Join Date: Apr 2010
Posts: 12
Likes: 0
Liked 0 Times in 0 Posts
|
|
thoughts on trigger adjustment
Thanks for the inputs so far. I am waiting for responses from the info provided.
A friend in our club told me to take off one grip and look inside the 52. The hammer spring is immediately visible, but so is what might be the sear spring.
Looking inside the 52 with the grip panel off, you can see what seems to be a flat spring which has a little tab that holds it in place (similar to a 1911). I'm thinking that if I open up the gun to access that flat spring, and bend it forward slightly, I can increase the pull weight on the trigger, in the same fashion as is done for a 1911.
But I've never done 'surgery' on my 52, and am hoping for a note from someone who's been there, done that, and can say that it is a correct methodology.
|
05-03-2010, 03:09 PM
|
|
Member
|
|
|
Join Date: Jul 2005
Location: NC
Posts: 30,716
Likes: 58,627
Liked 53,386 Times in 16,638 Posts
|
|
A suggestion...post in the gunsmithing section below, you may get more info.
__________________
Sure you did
|
01-21-2017, 01:37 AM
|
|
SWCA Member
|
|
|
Join Date: Apr 2009
Location: Salmon, Idaho
Posts: 2,821
Likes: 4,217
Liked 9,773 Times in 1,494 Posts
|
|
Quote:
Originally Posted by ladder13
|
No S&W manuals there
__________________
Tom Graham SWCA #2303
|
01-21-2017, 01:52 AM
|
|
SWCA Member
|
|
|
Join Date: Dec 2014
Location: Lincoln Co. NC
Posts: 2,241
Likes: 8,514
Liked 3,681 Times in 1,229 Posts
|
|
Some of the links are probably gone now since this thread is almost 7 yrs old.
__________________
Dan
Ps 96 SWCA 2930 SWHF 524
|
01-21-2017, 09:47 AM
|
|
Moderator
|
|
|
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,197
Likes: 8,423
Liked 17,358 Times in 5,699 Posts
|
|
Here's a youtube on field stripping:
Here's the exploded view:
__________________
So many S&W's, so few funds!!
|
The Following User Likes This Post:
|
|
01-23-2017, 11:49 PM
|
Member
|
|
|
Join Date: Jun 2010
Posts: 18
Likes: 1
Liked 0 Times in 0 Posts
|
|
Call Larry at LGI. Or mail it to him. He'll get you going with legal trigger weight. He did my Pardini SP22. Brownells has the exploded schematic. You'll need an Allen wrench as I remember. When you look inside with slide off one screw is the take up. But the trigger stop is the one you get thru the mag well cut . Make sure you don't eliminate ALL the over travel. It won't cock. You will most likely need a trigger shoe for bullseye. Highly recommended! I can photocopy the factory instructions as I still have. But won't find trigger adjusting data in the inst.
|
01-24-2017, 01:04 AM
|
Member
|
|
|
Join Date: Nov 2012
Location: Muskego, WI
Posts: 231
Likes: 7
Liked 246 Times in 108 Posts
|
|
Be very careful messing around with the sear spring unless you know what you are doing.
Rick
|
01-31-2017, 12:18 PM
|
Member
|
|
|
Join Date: Mar 2016
Posts: 4
Likes: 4
Liked 2 Times in 2 Posts
|
|
I had my fathers 52-2 returned to me after 47 years. I cleaned it when I was 13, but was having trouble remembering how to strip it down. After watching the youtube vid it all came back. Have shot 400 rounds out of it since the first of the year, I think I would score better if I didn't have all these tears in my eyes. Its such a pleasure to shoot, and knowing dad broke it in makes it that more special. I also got the box with it and six mags. Merry Christmas to me.
|
03-16-2019, 05:55 PM
|
Member
|
|
|
Join Date: May 2014
Posts: 432
Likes: 3
Liked 83 Times in 61 Posts
|
|
Be careful with that video posted up above. It has a major mistake. Six minutes in, it shows how to screw out the barrel bushing, while everything is still under spring pressure. It's a good way to damage those fine threads.
Much better:
|
The Following User Likes This Post:
|
|
|
Posting Rules
|
|
|
|
|