My old 5926, one of the sweetest shooting 3rd generation 9mm pistols ever made. The frame mounted decocker functions more smoothly than my Sig 226s and 229s.

I recently updated it with a new factory grip, new decocking lever spring, new Wolff recoil spring and Wolff reduced power hammer mainspring, all new Wolff magazine springs, 3 new orange magazine followers and black basepads, and the new replacement side plate with the plastic spacer....the S&W decocking lever assembly recall modification. (See original side plate, without the plastic spacer insert, in the last image).

The polished stainless finish is a bit gaudy...I call it my pimp pistol.

I like it. that sure dose look nice.

__________________
God save the SOUTH

I hear ya!

Beautiful, just beautiful! Thanks for the pics!

__________________
US Army 1966-69, VFW Member

That sure looks a lot better than one of those gold plated Desert Eagles... or this: Gaudy Guns - Blinged-Out Firearms, Pretty Pistols and Swank Sidearms (GALLERY)

__________________
Conrad
SWCA #1830 SWHF #222

Now I won't feel so self-conscious next time I pull it out at the range. I guess I won't have to buy an Eldorado, get a fur coat and change my name to Silky.

Thats a real nice piece. Taking care of business fo sure. Keep on pimpin!

Very Nice. How many hours?

How many hours of hand polishing? I lost track. It was done in stages. Every time I cleaned it after shooting, I'd first spend about fifteen or twenty minutes with the Mothers and a clean cotton rag. I finally stopped after I blinded the guy next to me at the range.

Well... at least hand polishing a 3rd gen doesn't grow hair on your palm... oops.

But seriously, that was all done with just Mother's polish and a cloth?. Wow.

__________________
Conrad
SWCA #1830 SWHF #222

Hahahahaha! I carry mine when I'm on the corner slangin that rock yo! Seriously though, I actually think they look really classy like this, that dull silver looks really cheap now to me. Every time I pull out my 4006 and see it next to my 59, well, it just looks boring!

I don't know about sop, but I did a **** ton of sanding. To get a really nice finish you have to get past the bead blast.

No, I was kidding. The polish job took more than Mothers and a cotton rag. It's not hard or all that time-consuming, but it does take some initial prep work and patience. It is free, though. For those interested in doing this kind of thing, here are some tips:

Naturally, you have to first remove the really tired-looking original bead blast finish. This finish looks good on new and re-finished guns, but on (even slightly) used pistols it quickly builds up a surface patina of tiny scuffs, scratches, darker and brighter areas, minute line-crazing on the flats and other surface flaws. The S&W factory SS machining and finish metal-work on guns of this era can also be a bit crude, with small tool and machining marks hidden under the bead blast finish.

Front frame edges, the sides and rear of the tang, the entire trigger guard and various transition areas around the magazine release assembly, the magazine well and bottom edges of grip can all be knife-sharp. The ejection port edges, the front, rear and bottom leading edges of the slide, and so on, can also be rough. These areas need work. However, be careful with the logos, letters and numbers, the slide gripping ridges, the frame's front-strap grooves and the trigger guard's front checkering; these just take a bit of steel wool to clean up, while still maintaining definition.

I'm not a fan of "gun melts"; the entire gun often ends up looking like a bar of soap after a few long showers and it ruins the original lines. I also don't like the dremel tool and bench grinder/buffer approach...stay away from power tools. I do appreciate finely finished, perfectly smooth flats blending crisply into polished rounded areas, with all "cutting" edges eased away (slightly rounded), just enough so the entire gun looks more unified and handles comfortably. In the end, it's all about the details.

I broke down the frame and slide completely. All broad and long surface areas have to be free of protruding obstructions so you can do all the flats and rounds evenly using a sanding block. It's also easier to work into all the tiny crevices, and such. The hardest part on these double-stack frames is the sharp "step" from the thicker to the narrower portion at the front.

I also removed the sights so I could re-blue them and freshen the dots with bright-white acrylic paint. The side plate and all pins, slide stop/release lever, magazine release button and opposite flat end of catch assembly, barrel hood, all exterior trigger and hammer surfaces were all done separately. It's easy to do these small parts when the gun is totally stripped; the more time you devote to these small parts, the better the end result.

Wet/dry or emery paper works well, from around 400 to 1500 grit, and finer. Work with the grain of the metal, straight motions front to rear, no circular sanding. The surface flaws and bead blast finish go quickly with the 400 paper. Some spots need additional time, and the broad, flat or rounded areas need a sanding block. You're then left with a slightly porous SS surface that looks pretty dull.

Work quickly and progressively with finer grits. You'll notice that the worn paper leaves a more burnished finish as you go finer, closing up the surface pores of the SS as it becomes more reflective. Keep your worn papers, they work better towards the end of the polishing. The Mothers (or Flitz) is great for the final steps, and for fully burnishing the finish over time. You can go to a full mirror-finish if you like, but I stop before I get to that point.

I find the finely polished SS finish is easier to clean and maintain than original bead blast. Powder residues, grease and dirt are quickly removed and any handling/shooting damage can be easily repaired with the (old, used) emery paper at every cleaning session.

Wow! Nice polish job, and great photos, too!

Sure is pretty!

It does if you do it right!

Think I'll bling the stainless on my sigma before I go back to work on my 4006. It took a long time to make the 4006 look respectable to undo my feaux glass bead. By the way, anyone know if I can get the S&W stamp put on. Mine had that gawdy Tactical print on the slide, and oops, it's gone now.

__________________
Hold on. SWAT's at my door.

I am guilty of polishing my stainless guns too. Even a police trade can be made to look good with Mother's polish. Here is mine I polished. It's not the gun yours is but it does shine nice.

That's beautiful. Once you polish one, you just can't stop. It's a disease. Here's another one I did: a 3906.

We need to form some kind of Pistol Polishers Anonymous.

-Hello, my name is SOP...I can't stop polishing my pistol

Beautiful work!! guess I am going to have to get busy on my 5906 twins... It'll take some time, but I will try and post some pics before, during and after.
I appreciate the tips you posted above. It will make it much easier.
Thanx,
Allan