3913 Lady Smith: Holster Needed! (UPDATED 4/21 with Holster Review)

HarrishMasher · Apr 3, 2018

I reached out to a couple of my favorite holster makers and neither of them have the mold for the Lady Smith. So that means no holster. Anyone have a line to someone who makes Holsters for the 3913 Lady Smith? I actually have the blued 3014 Lady Smith. Thanks!

GaryS · Apr 3, 2018

Check Side Guard Holsters. They don't specifically list the LS, but they do have holsters for the 391x guns. FIST specifically lists the 3913LS.
MTR also lists a IWB for the 3913LS.

growr · Apr 3, 2018

Holsters for a Sig 239 usually fit like a glove......If you get in a jam PM me...I have some that I could sell.....
What do you want by the way? IWB, OWB, paddle, leather, kydex, retention strap? etc.....
Randy

gmiller0737 · Apr 3, 2018

Check UBG Holsters that is what I have for My 3913

Sent from my iPhone using Tapatalk

18DAI · Apr 3, 2018

With my 3914NL, for IWB carry I use a Stoner holster my friend nocents gave me. Thanks again nocents!!

For OWB, I use a Murphs Leather belt loop holster made for a 3 inch barrel 1911. Works like a charm. Hope this helps! Regards 18DAI

Maddog 521 · Apr 3, 2018

I had this one made at D.M. Bullard and it works very well.

Don~Z~ · Apr 4, 2018

I bought one from clinger holsters for my 3914... fits perfectly

Sent from my iPhone using Tapatalk

Triggernosis · Apr 4, 2018

I can do one. I have 3913 Ladysmith myself and have made a couple of holsters for it. A couple of examples on my Instagram page.

Blackbarry · Apr 4, 2018

I've posted this picture before, but it answers the OP's question perfectly. It's my 3914LS in a Stoner holster (IWB).

HarrishMasher · Apr 4, 2018

growr said:
Holsters for a Sig 239 usually fit like a glove......If you get in a jam PM me...I have some that I could sell.....
What do you want by the way? IWB, OWB, paddle, leather, kydex, retention strap? etc.....
Randy

Hi Randy, thanks. IWB no retention strap. I'm Right Handed. Leather or Kydex is fine. Prefer leather if not too bulky.

HarrishMasher · Apr 4, 2018

Blackbarry said:
I've posted this picture before, but it answers the OP's question perfectly. It's my 3914LS in a Stoner holster (IWB).

That is perfect! I actually bought a used holster years back for a revolver. Turned out to be a Stoner. It is a great holster.

Do they still make these? Stoner 28-1 it looks like it says?

I just looked it up and they still make it. This is perfect. Thanks!

Fishmonk · Apr 4, 2018

Blackbarry said:
I've posted this picture before, but it answers the OP's question perfectly. It's my 3914LS in a Stoner holster (IWB).

Where did you get those grips, my man?

Jaysq · Apr 4, 2018

Wright Leather Works makes their entire line of holsters for the S&W 39134/14 Leather Concealed Carry Holsters & Belts | Wright Leather Works LLC

shell627 · Apr 4, 2018

My wife carries hers I a holster from Blade-Tech

HarrishMasher · Apr 5, 2018

OP HERE:

I actually ordered one from Stoner Holsters for my 3914 LS. Thanks for the suggestion. It's funny, I currently own about 60 holsters. Forget the hundred + holsters I have purchased over the years and sold or gave away. Anyway I have a few K & L Frame S&W revolvers with 2.5" barrels. When I picked up my first K frame stubby, I ordered a couple of IWB Leather holsters from a couple of custom makers I like. But I need a holster while I waited for those to be made. I found a used leather IWB holster on eBay for like $25. So I bought it. The ad had no brand name for the holster and when I got it i could barely make the name "STONER" out on it. I had never heard of Stoner Holsters. I googled it and sure enough there it was.

It turns out, that $25 leather IWB holster for 2.5" barreled K & L Frames has proven to be the best fitting and most comfortable of the 5 holsters I eventually bought for my snubby K&L Frame revolvers. It is also the smallest and most compact. I never would have believed it.

Though I bought many dozens of holsters since, I have never bought a Stoner. The suggestion here made me remember all that. I ran over to the Stoner website and ordered one right up for my 3914 Lady Smith! Looking forward to carrying this baby now and again. It will be great for days when I want to carry something a little smaller and lighter than my Dan Wesson Valkyrie Commander 9mm; my EDC pistol.

bill2000 · Apr 6, 2018

I'd like to get your impressions when you get it. Looking for an OWB holster for my 3913.

HarrishMasher · Apr 7, 2018

bill2000 said:
I'd like to get your impressions when you get it. Looking for an OWB holster for my 3913.

Sure. I will add it right here on this thread once I get it. It may take a couple of weeks. Since mine is an IWB it may no be too helpful for you.

bill2000 · Apr 8, 2018

Thanks! interested in overall quality and service issues. Also might be an excuse to buy two holsters!

nocents · Apr 8, 2018

Stoner is my go to holster....

nocents · Apr 9, 2018

I can also add since they dont show a listing for the smaller frame SW .45.....that my 4516-2 fits my HK .45c holster like the proverbial glove

..

3913 Lady Smith: Holster Needed! (UPDATED 4/21 with Holster Review)

Member

Member

Member

Member

Absent Comrade

Member

Attachments

Member

Member

Member

Attachments

Member

Member

Member

US Veteran

Member

Member

Member

Member

Member

Member

Member

Similar threads