|
|
04-15-2024, 05:56 PM
|
Member
|
|
|
Join Date: Dec 2023
Posts: 28
Likes: 20
Liked 2 Times in 2 Posts
|
|
Novak sight
Hi Smith experts
I need to replace the sight on my 6946.
Do I need to take out the little screw first?
Thanks
|
The Following User Likes This Post:
|
|
04-15-2024, 06:57 PM
|
Member
|
|
|
Join Date: Dec 2002
Location: AZ
Posts: 419
Likes: 57
Liked 203 Times in 86 Posts
|
|
Yes, loosen it, it is there to prevent the sight from moving.
|
04-15-2024, 08:17 PM
|
Member
|
|
|
Join Date: Dec 2023
Posts: 28
Likes: 20
Liked 2 Times in 2 Posts
|
|
It is very tight any idea's how to loosen it?
|
04-15-2024, 08:23 PM
|
Member
|
|
|
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 6,958
Likes: 4,437
Liked 10,077 Times in 3,695 Posts
|
|
Put a drop of penetrating oil on it and let sit for a day. If that don’t work put Allen key in screw and heat, if thread locker was used that should loosen it.
|
The Following User Likes This Post:
|
|
04-15-2024, 11:14 PM
|
|
Member
|
|
|
Join Date: Mar 2009
Location: Western WA
Posts: 1,032
Likes: 610
Liked 767 Times in 364 Posts
|
|
Does anyone know if they are designed to slide off to the left or right, or does it matter?
Todd
|
04-16-2024, 01:32 AM
|
|
SWCA Member
|
|
|
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,120
Likes: 7,835
Liked 4,140 Times in 1,416 Posts
|
|
Quote:
Originally Posted by toddimusnimski
Does anyone know if they are designed to slide off to the left or right, or does it matter?
Todd
|
Remove from left to right. Install from right to left.
|
The Following 4 Users Like Post:
|
|
04-16-2024, 07:53 AM
|
|
Member
|
|
|
Join Date: Mar 2002
Location: midwest
Posts: 503
Likes: 656
Liked 561 Times in 272 Posts
|
|
Quote:
Originally Posted by Jeppo
Remove from left to right. Install from right to left.
|
Exact opposite, I thought, if you’re looking down at the rear sight with muzzle facing away. No?
|
The Following User Likes This Post:
|
|
04-16-2024, 08:51 AM
|
BANNED Scammer !! SCAMMER !! SCAMMER !! SCAMMER !! SCAMMER !! THIEF !! THIEF !! THIEF !! THIEF !! THIEF !! THIEF !! THIEF !! SCUMBAG !! SCUMBAG !! SCUMBAG !! SCUMBAG !! SCUMBAG !! DANGER !! DANGER !! DANGER !! DANGER !! DANGER !!
|
|
|
Join Date: Mar 2024
Posts: 14
Likes: 13
Liked 8 Times in 4 Posts
|
|
Loose it with some oil.
|
04-16-2024, 09:00 AM
|
|
Moderator
|
|
|
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,645
Likes: 8,414
Liked 17,256 Times in 5,661 Posts
|
|
Quote:
Originally Posted by Drm50
Put a drop of penetrating oil on it and let sit for a day. If that don’t work put Allen key in screw and heat, if thread locker was used that should loosen it.
|
Another effective way to heat a small part like a screw is to use a soldering iron.
__________________
So many S&W's, so few funds!!
|
The Following User Likes This Post:
|
|
04-16-2024, 09:02 AM
|
|
Member
|
|
|
Join Date: Sep 2011
Location: Puget Sound
Posts: 2,942
Likes: 8,919
Liked 5,334 Times in 1,880 Posts
|
|
You may find that even when you get the screw out, the sight itself won't easily move. The dovetails can be tight and there may be some Loctite or equivalent in the dovetail. Springfield did this on a new Garrison I bought. Just adjusting the sight gave me fits, let alone removing it. In short, you may need a good sight pusher.
It does sound like you haven't done this before, OP. Seeking advice like you're doing, and perhaps getting some hands-on assistance is wise.
|
04-16-2024, 10:51 AM
|
|
SWCA Member
|
|
|
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,120
Likes: 7,835
Liked 4,140 Times in 1,416 Posts
|
|
Quote:
Originally Posted by Frank Black
Exact opposite, I thought, if you’re looking down at the rear sight with muzzle facing away. No?
|
Start at about 6 minutes in.
S&W 3RD GENERATION DISASSEMBLY (SLIDE) VIDEO #2 OF 4 - YouTube
|
The Following 2 Users Like Post:
|
|
04-16-2024, 11:13 AM
|
Member
|
|
|
Join Date: Oct 2019
Location: Georgia
Posts: 2,165
Likes: 4,495
Liked 2,039 Times in 969 Posts
|
|
Quote:
Originally Posted by Frank Black
Exact opposite, I thought, if you’re looking down at the rear sight with muzzle facing away. No?
|
Pointing the gun as if you are shooting, you push the sight out from the left to the right side. You push in from the right to the left. This is pretty standard for most all firearms manufacturers and site manufacturers.
Rosewood
|
04-16-2024, 07:43 PM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,683
Likes: 1,847
Liked 5,437 Times in 2,741 Posts
|
|
OK, just to get things straight on sights, this is looking at the slide from the rear:
S&W: install right to left. Remove, left to right. BTW on S&W 1-3rd generations, beware of the spring for the magazine safety and firing pin block spring and plunger as the rear sight moves to the right. On the M&Ps, beware of the striker block end cap, spring and plunger. Make sure the set screw is removed before trying to get the sight off. It can catch in the recess for the cap for the striker block. Be very careful in installing the sight so you don't bugger the various springs up.
Colt: install left to right, Remove right to left. On 80 series be aware of the spring and plunger for the firing pin block. Again, be very careful of the spring when installing the sight.
|
04-16-2024, 10:29 PM
|
|
Member
|
|
|
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,494
Likes: 5,893
Liked 9,358 Times in 3,505 Posts
|
|
Quote:
Originally Posted by Steven ET
Do I need to take out the little screw first?
|
Yes. Remove the sight from left to right, when viewed from the rear.
This is from when I replaced my Shorty 40's sights with LPA adjustable sights.
Some models have the oval plate over the springs, like this one, some do not have it. The plate makes it a little easier when re-installing the rear sight. Without it you have to be careful not to pinch the springs when sliding the sight back on.
.
.
.
Yes, they can get dirty in there
.
.
.
.
__________________
Waiting for the break of day
Last edited by BLUEDOT37; 04-16-2024 at 10:48 PM.
Reason: .
|
The Following User Likes This Post:
|
|
|
Posting Rules
|
|
|
|
|