I recently acquired a Model 629-1, S/N: ADR98XX, with the date of May 29th, 1984 rubber stamped inside of the right grip panel. The rear adjustable sight assembly and mounting screw is missing, due to a scope that was previously mounted on this revolver. I would like to know the correct part numbers and possible source(s) to obtain the assembly & screw. Thanks in advance!
629-1 REAR SIGHT QUESTION
- Thread starter Martyk
- Start date
Register to hide this ad
Try the factory.
+ Bowen Classic Arms + Parts Store
You need a sight that is squared off at the front. Unfortunately it is hard to tell what is what when off the gun. Above link has useful info.
You need a sight that is squared off at the front. Unfortunately it is hard to tell what is what when off the gun. Above link has useful info.
OP
Out of production since 1993.
OP
Yes, that is correct. And the dimension between the elevation adjusting stud & the mounting screw is 1.950" C-C. Unfortunately, but not surprising, Bowen is sold out. But thanks anyway!
Last edited:
- Joined
- Jun 28, 2007
- Messages
- 27,660
- Reaction score
- 21,324
Try a Wanted to Buy ad here on the Forum.
Alan’s advice is spot on- I had the EXACT same situation several months ago except for a 629-3!
I got several responses from outstanding members here and got the right sight at a great price!
OP
Thank you Alan, I guess I couldn't see the forest because of the trees!
Last edited:
OP
Found one, thank you Termite! And thanks to everyone who responded!
