WITHDRAWN Ruger Super Blackhawk .44 Mag., Stainless, 7 1/2” Barrel
In Excellent overall condition with factory box, papers, lock, etc. I've run, maybe, 300-400 rounds of factory ammunition over the years. It's in bone stock condition, as it came from factory. Very minor finish wear from storage that I can't seem to capture on pics. Serial Number 87-184XX
WITHDRAWN $460 shipped to an FFL in lower 48 via USPS from an FFL
1903/30 Turkish 8mm Mauser and Bayonet
German rifle reasenaled by the Turks, with the tall stripper clip guide on the rear receiver bridge (which also serves as bolt release) and straight bolt handle with tear-drop shaped knob. Receiver is marked TC ASFA ANKARA 1938. Matching receiver and rear sight (all three pieces), and various crescent and other stamps which I cannot decipher. Nice patina throughout metal. Wood has been cleaned with mineral spirits and reconditioned with boiled linseed oil and beeswax. There's a small, well-performed, splice on the lefthand side of the stock, just behind the front handguard retaining ring. Bore has sharp lands with some debris in grooves (I have never shot it, so it could very well clean out when shot). Includes cleaning rod, which is bent and appears to be made of brass. Rifle has been cleaned but never fired. “C.A.I. Georgia VT Germany 1903 8mm” stamp on right side of barrel, between muzzle and front barrel band. Includes bayonet.
$250 Shipped East of Mississippi
EMAIL LeisureThingsATgmail.com or through the forum (NO PRIVATE MESSAGES, please) for additional info., reasonable offers, etc. Can do FTF in Northern Montgomery County, MD. Items also advertised on other “forums” and subject to prior sale (first come, first served, based on email time stamp). Shipping as noted via cheapest carrier; Insurance Extra. Handguns shipped from an FFL. Payments accepted in USPS/Wells Fargo money orders and Cash; Discreet Paypal only for small items, sorry. Feel free to check feedback at Ar15.com (+59), FALfiles.com (+24), Gunbroker (+10), Rimfirecentral.com (+6), and ebay (+6; MG*70). All Laws will be obeyed.
Thanks for looking!
***EVERYTHING BELOW THIS LINE IS SOLD OR SOLD PENDING FUNDS***
Ruger Single-Six .22LR, Stainless, 5 1/2” Barrel
In Very Good+ overall condition, with no factory box or accessories. .22 Long Rifle cylinder only (etched partial serial number on the same). There are the usual finish scratches from use and storage (can be removed with sandpaper), but the revolver is in great mechanical condition, has an excellent bore, and is a good a shooter as any of these. Serial Number 66-710XX
$370 shipped to an FFL in lower 48 via USPS from an FFL
***SPF 11/02/12***Olympic Arms PCR Carbine w/Bushmaster 16” 1/9 twist 5.56X45mm Heavy Chrome-lined Barrel.
Excellent Condition OA PCR carbine (A2 sights, fixed carry handle, forged lower and upper receivers) with a Bushmaster barrel (threaded, and with an A2 flash hider). Though I don't keep track of rounds, I estimate about 400 rounds fired (Bushmaster and Colt barrels are some of the most durable barrels with life in the tens of thousands of rounds). Colt double-heat shield M4 handguards, side sling swivel, and RRA 6-position collapsible stock on an aluminum commercial receiver extension. Tight, reliable, and accurate. There's a scratch around the muzzle from when the barrel was threaded, and the bottom of the upper receiver (where the two receivers meet) was slightly filed because it was too tight to close when new (still tight, no rattle or gap, and lower accepts other uppers, such as Bushmaster, Colt, etc. There's a picture showing touch up paint where upper was filed). Will include a black nylon “silent” sling, and Chinese carry handle scope mount. Note for newbies, this is Not the same model as the “Plinker” which comes with a fixed stock and A1 sights; this has nicer features, not to mention the better Bushmaster barrel.
***SOLD 11/02/12***$650 shipped East of the Mississippi
Package 35”L X 7.5”W X 3”D, approx.10lbs.
Bersa Firestorm .22LR
In Excellent condition with one factory magazine, papers, key for internal lock, external trigger lock, and box (basically, everything you get when you buy a new one). In addition, you get an extra pair of Bersa hard plastic grips; currently on the pistol. The soft rubber grips with the front finger grooves that it ships with from the factory are included. There is minor finish wear on the edges of the trigger guard and a spot on the very top of the “beavertail” (both pictured as best as I could). It runs smoothly even with bulk ammo.
SOLD $200 shipped to an FFL in lower 48 via USPS from an FFL
L1A1 on Imbel Inch-Cut Receiver
Century Arms imported Imbel inch-cut receiver (inch cut top cover tabs, charging handle rail, and magazine well lip) coupled with an Excellent condition parts kit, including a bright, strong, bore. FSE Hammer/Trigger/Sear (3), FSE Charging Handle (1), FSE Muzzle Device, unslotted (1), and DSA or Tapco (don't recall) inch Gas Piston (1), for a total of six (6) U.S. Compliance parts. Original Maranyl furniture. The kit didn't need refinishing, but I wanted everything to match and had it done in a matte parkerizing-like gray Duracoat or Guncoat (don't remember which). I'm no expert, but according the the various stamps, parts appear to be British with the exception of the sand-cut bolt carrier and bolt (both Australian). Assembled by Mr.Bonecrusher on FALfiles.com a few years ago. Has not been fired other than test-firing by gunsmith.
Includes ten (10) factory “inch” magazines, four (4) of which have been refinished to match the rifle (2 not shown in accessories pic, other mags show some wear), surplus sling, bayonet and scabbard (shows some wear and still has grease), original flashhider (refinished along with rifle), surplus New HB&S 1959 CAT NO1005-99-960-0065 cleaning kit in tin (combo tool, chamber brush, pull through, brush, oiler), as well as a Century Arms US-made L1A1 plastic pistol grip and handguards (sprayed with anti-skid paint).
All you need is the ammo! Mags and accessories will not be sold separately until the rifle is sold, thanks.
$1400 shipped in Lower 48 via USPS from non-FFL
In Excellent overall condition with factory box, papers, lock, etc. I've run, maybe, 300-400 rounds of factory ammunition over the years. It's in bone stock condition, as it came from factory. Very minor finish wear from storage that I can't seem to capture on pics. Serial Number 87-184XX
WITHDRAWN $460 shipped to an FFL in lower 48 via USPS from an FFL
1903/30 Turkish 8mm Mauser and Bayonet
German rifle reasenaled by the Turks, with the tall stripper clip guide on the rear receiver bridge (which also serves as bolt release) and straight bolt handle with tear-drop shaped knob. Receiver is marked TC ASFA ANKARA 1938. Matching receiver and rear sight (all three pieces), and various crescent and other stamps which I cannot decipher. Nice patina throughout metal. Wood has been cleaned with mineral spirits and reconditioned with boiled linseed oil and beeswax. There's a small, well-performed, splice on the lefthand side of the stock, just behind the front handguard retaining ring. Bore has sharp lands with some debris in grooves (I have never shot it, so it could very well clean out when shot). Includes cleaning rod, which is bent and appears to be made of brass. Rifle has been cleaned but never fired. “C.A.I. Georgia VT Germany 1903 8mm” stamp on right side of barrel, between muzzle and front barrel band. Includes bayonet.
$250 Shipped East of Mississippi
EMAIL LeisureThingsATgmail.com or through the forum (NO PRIVATE MESSAGES, please) for additional info., reasonable offers, etc. Can do FTF in Northern Montgomery County, MD. Items also advertised on other “forums” and subject to prior sale (first come, first served, based on email time stamp). Shipping as noted via cheapest carrier; Insurance Extra. Handguns shipped from an FFL. Payments accepted in USPS/Wells Fargo money orders and Cash; Discreet Paypal only for small items, sorry. Feel free to check feedback at Ar15.com (+59), FALfiles.com (+24), Gunbroker (+10), Rimfirecentral.com (+6), and ebay (+6; MG*70). All Laws will be obeyed.
Thanks for looking!
***EVERYTHING BELOW THIS LINE IS SOLD OR SOLD PENDING FUNDS***
Ruger Single-Six .22LR, Stainless, 5 1/2” Barrel
In Very Good+ overall condition, with no factory box or accessories. .22 Long Rifle cylinder only (etched partial serial number on the same). There are the usual finish scratches from use and storage (can be removed with sandpaper), but the revolver is in great mechanical condition, has an excellent bore, and is a good a shooter as any of these. Serial Number 66-710XX
$370 shipped to an FFL in lower 48 via USPS from an FFL
***SPF 11/02/12***Olympic Arms PCR Carbine w/Bushmaster 16” 1/9 twist 5.56X45mm Heavy Chrome-lined Barrel.
Excellent Condition OA PCR carbine (A2 sights, fixed carry handle, forged lower and upper receivers) with a Bushmaster barrel (threaded, and with an A2 flash hider). Though I don't keep track of rounds, I estimate about 400 rounds fired (Bushmaster and Colt barrels are some of the most durable barrels with life in the tens of thousands of rounds). Colt double-heat shield M4 handguards, side sling swivel, and RRA 6-position collapsible stock on an aluminum commercial receiver extension. Tight, reliable, and accurate. There's a scratch around the muzzle from when the barrel was threaded, and the bottom of the upper receiver (where the two receivers meet) was slightly filed because it was too tight to close when new (still tight, no rattle or gap, and lower accepts other uppers, such as Bushmaster, Colt, etc. There's a picture showing touch up paint where upper was filed). Will include a black nylon “silent” sling, and Chinese carry handle scope mount. Note for newbies, this is Not the same model as the “Plinker” which comes with a fixed stock and A1 sights; this has nicer features, not to mention the better Bushmaster barrel.
***SOLD 11/02/12***$650 shipped East of the Mississippi
Package 35”L X 7.5”W X 3”D, approx.10lbs.
Bersa Firestorm .22LR
In Excellent condition with one factory magazine, papers, key for internal lock, external trigger lock, and box (basically, everything you get when you buy a new one). In addition, you get an extra pair of Bersa hard plastic grips; currently on the pistol. The soft rubber grips with the front finger grooves that it ships with from the factory are included. There is minor finish wear on the edges of the trigger guard and a spot on the very top of the “beavertail” (both pictured as best as I could). It runs smoothly even with bulk ammo.
SOLD $200 shipped to an FFL in lower 48 via USPS from an FFL
L1A1 on Imbel Inch-Cut Receiver
Century Arms imported Imbel inch-cut receiver (inch cut top cover tabs, charging handle rail, and magazine well lip) coupled with an Excellent condition parts kit, including a bright, strong, bore. FSE Hammer/Trigger/Sear (3), FSE Charging Handle (1), FSE Muzzle Device, unslotted (1), and DSA or Tapco (don't recall) inch Gas Piston (1), for a total of six (6) U.S. Compliance parts. Original Maranyl furniture. The kit didn't need refinishing, but I wanted everything to match and had it done in a matte parkerizing-like gray Duracoat or Guncoat (don't remember which). I'm no expert, but according the the various stamps, parts appear to be British with the exception of the sand-cut bolt carrier and bolt (both Australian). Assembled by Mr.Bonecrusher on FALfiles.com a few years ago. Has not been fired other than test-firing by gunsmith.
Includes ten (10) factory “inch” magazines, four (4) of which have been refinished to match the rifle (2 not shown in accessories pic, other mags show some wear), surplus sling, bayonet and scabbard (shows some wear and still has grease), original flashhider (refinished along with rifle), surplus New HB&S 1959 CAT NO1005-99-960-0065 cleaning kit in tin (combo tool, chamber brush, pull through, brush, oiler), as well as a Century Arms US-made L1A1 plastic pistol grip and handguards (sprayed with anti-skid paint).
All you need is the ammo! Mags and accessories will not be sold separately until the rifle is sold, thanks.
$1400 shipped in Lower 48 via USPS from non-FFL
Last edited:
