trikerider
Member
I currently load 230 RN Berrys plated in my 45's. I run a Glock21sf, a Springfield loaded target 1911, and a S&W 625 revolver. Is the Berrys plated 200 FP also a good bullet to shoot in 45's? thanks trikerider
bullets for 45 ACP
- Thread starter trikerider
- Start date
Register to hide this ad
ImjinScout
Member
I load the Berry's 200gr SWC's and they are just fine, also keep the same charge weight as when I load the Berry's 230gr RN,
Skip Sackett
US Veteran
Well, there are these:
240gr, 230gr, 280gr
Or, these:
200gr
Or these: (They were really interesting!)
250gr
And of course, all of these:
200gr, 200gr, 240gr, 250gr, 255gr & 280gr
Then there were these:
230gr
My absolute FAVORITES!:
200gr HP
And if I have to, these:
Both 230gr plated, on the left, Berry's and the right is a Ranier.
All of those bullets have been in my M625JM at one point or another. Most of the lead ones with the exception of those over 240gr have been run through my PT1911 and the plated ones are a standard diet for my Glock 21 SF with the standard barrel in it. I do have a Lone Wolf 6" barrel for it too, and in that configuration, it has taken most of the 230gr and below quite well.
As a last resort, I use a bullet with a coating on it, the rest of them I shoot, are just plain cast. I make them myself and really enjoy doing that too!
240gr, 230gr, 280gr
Or, these:
200gr
Or these: (They were really interesting!)
250gr
And of course, all of these:
200gr, 200gr, 240gr, 250gr, 255gr & 280gr
Then there were these:
230gr
My absolute FAVORITES!:
200gr HP
And if I have to, these:
Both 230gr plated, on the left, Berry's and the right is a Ranier.
All of those bullets have been in my M625JM at one point or another. Most of the lead ones with the exception of those over 240gr have been run through my PT1911 and the plated ones are a standard diet for my Glock 21 SF with the standard barrel in it. I do have a Lone Wolf 6" barrel for it too, and in that configuration, it has taken most of the 230gr and below quite well.
As a last resort, I use a bullet with a coating on it, the rest of them I shoot, are just plain cast. I make them myself and really enjoy doing that too!
sourdough44
Member
200 grn plated RN here in my 45's usually.
m657
Member
thanks for the wonderful photo essay of choicesChoicesCHOICES!!!
Skip Sackett
US Veteran
That was the point, lots and lots of choices!
I use the Montana Bullet cast (H&G68) Lyman bullet in 205gr. Incredible accuracy over 4.0gr. Bullseye. Great over VV310 as well but I have 10lbs. of Bullseye left.
I use 4.3 or 4.4gr. Bullseye with a 185gr.Nosler JHP for 50yd. target.
Terry
I use 4.3 or 4.4gr. Bullseye with a 185gr.Nosler JHP for 50yd. target.
Terry
Similar threads
