charging handle

ltcnav

ltcnav

US Veteran
Joined
Oct 15, 2011
Messages
26
Reaction score
14
Location
UP, Mi
Looking to swap out the original charging handle. Can get the Plinker Tactical for $47, or Midway has the BCM Gunfighter on sale for $38. Plinker is ambi, BCM is not. BCM has three handle(latch) sizes.
Any experiences with either one?
 
Register to hide this ad
I have the Plinker Tactical handle and I like it much more than stock (being a lefty and all :)

I did however look at Midway Usa for the BCM handle and noticed it was for AR-15's and not the M&P 15-22. I'm not sure that those will fit in our rifles.
 
Tim Tom said:
I have the Plinker Tactical handle and I like it much more than stock (being a lefty and all :)

I did however look at Midway Usa for the BCM handle and noticed it was for AR-15's and not the M&P 15-22. I'm not sure that those will fit in our rifles.
Click to expand...

AR-15 charging handles will NOT fit 15-22s for a variety of reasons, not the least of which is length.

The first PTs were junk, but they did a redesign and now have a decent product. Doomsday Industries makes a good one, as well.
 
Last edited:
Tim Tom said:
I have the Plinker Tactical handle and I like it much more than stock (being a lefty and all :)

I did however look at Midway Usa for the BCM handle and noticed it was for AR-15's and not the M&P 15-22. I'm not sure that those will fit in our rifles.
Click to expand...

I *KNOW* that charging handles for an AR 15 won't work in the M&P 15-22.

Those that DO work in the 15-22 include Plinker Tactical, NDZ and Doomsday.
 
I have the plinker tactical and i really like it :) I would like to try the South African one that Kaybak has, looks sweet and someone has just ordered a doomsday one, so will wait for review on that.
Re: the plinker, I have found that with the oversize latch which perfectly fits my finger, it is easy to 'find' and means you can access and use very quickly which helps when your ammo fudges during rapid fire comps. :cool:
 
At this time I am running with a Tacticool 22 handle with NDZ latch. Have tried the PT handle and latch also the PT Latch in the Tacticool handle as well as the supplied one.
I like the set up I am running now as it is a slightly larger latch in the alloy handle.
I have a doomsday en-route as I wanted
To try one of those.
Am looking at Raptor and Gunfighter for full size AR but am aware these won't fit the Smiths.
I also have finally managed to get a hold of an SWS latch but at this time I haven't tried it out just yet.

Rob.
 
Last edited:
I run the Doomsday on my 15-22 SBR build & love it. I ordered another last week for my other 15-22 but have yet to hear back from them.

The stock charging handle is fine & I'm sure would last a lifetime however when I run the gun with the flip to side 3X magnifier all the way back on the rail, I find I need the Doomsday. The stock handle is just too small then.

The Doomsday is as close as I have seen to the Raptor I run on my 300 Blackout.
 
Just to clarify my previous post about the PT handle, I bought one of the first production runs. The ambi-latch was fine, but the dimensions for the handle were way off and the handle was a very sloppy fit in all respects. Discussions with PT were rather rude and condescending. I removed the latch and put it on an NDZ handle and used this for almost two years and was very happy with the combination.

Earlier last year, I received a beta version of the Doomsday Industries handle and it has been on my 15-22 since.

The PT/NDZ combo is still on my bench and I will put it on my 11-year old grandson's rifle when warm weather hits and he starts shooting again.
 
Last edited:
Thanks

Yep, and I just ordered two of them. Plinker has them listed for $46.99 on their site. I don't know what other dealers get for them, but this is a good price. The part numbers are the same, I checked to make sure. Two shipped for $36.64 with insurance which was a dollar extra.
 
I found Plinker Tactical handles on clearance at Academy, they were $19 iirc, very happy with it.

roog
 
Wow!

At that price, someone order one from buds and post it to me? :D

Would be worth having it in my spares box at that price even if I never used it.

Rob:D
 
My doomsday versus stock...
1217002058.JPG
 
Keith

You are right I don't neeeed another but, at that price, would be rude not to. Hehe

I also had notification of shipping today for Doomsday. :-) super stoked as have been wanting one for the last year. Not because I'm left handed because I'm not, but because, I like the lines and how it compares to the other Ambi Handles I have seen.

And of course because in the UK, they just not around, so would be a one off. Lol.

Well one of two anyways. Lol. Oh yeah two that I will have. Hehehe. For a little while at least. :D

Rob (Mark)
 
Last edited:
You must log in or register to reply here.

Similar threads

G
  • Locked
WTB: Looking for Plinker Tactical, ProMag, and other 15-22 accessories.
Replies
0
Views
411
GeneralJHutt
G
G
Looking for Plinker Tactical, ProMag, and other 15-22 accessories.
Replies
15
Views
3K
strobro32
strobro32
G
Radian Raptor 15-22 Charging Handle
Replies
9
Views
2K
Pubtym
Pubtym
H
AR15 Pistol Build in .300 AAC
Replies
17
Views
2K
Sarge9
Sarge9
stringpicker
Decided to buy a Turkiye made shotgun...not bad for the price.
Replies
9
Views
543
LVSteve
LVSteve

Latest posts

Back
Top