tbblizzard
Member
- Joined
- Aug 8, 2013
- Messages
- 14
- Reaction score
- 0
Make: Ruger
Model: Mark III (Mk3, Mk III) Slab Side Competition 6-7/8" Barrel
Caliber: 22 LR (22lr)
Location: Southern California
Price: 650 FIRM
Other info:
Ruger Mark III Competition Slab Side Target Model with 6-7/8" Barrel.
-Volquartsen Competition Pistol Kit; includes replacement of all frame components; sear, disconnect, trigger, trigger bar, slide release, etc. Trigger is fully adjustable for pre travel and over travel stop.
-Original wood target grips, plus aluminum hogue grips in silver, plus Altamont wood target grips in silver with finger grooves.
-4 magazines included
-Loaded Chamber Indicator (LCI) stainless steel filler installed.
-Magazine disconnect removed by the Volquartsen Competition Pistol Kit.
-Bolt upgraded with Volquartsen Exact Edge Extractor.
-HiViz front sight included (not shown installed).
-All original parts are shown in the pictures and are included if you wish to return the gun to stock. Original Ruger hard case, weaver rail, all paperwork, LCI, extractor, internals, etc are included.
-Only blemish on this gun is at the butt of the gun where the mainspring housing latch is.
-When this was first purchased it took a very long time to break in the field stripping process. Used to have to use a rubber mallet, wooden dowel, etc. Now it can be done by hand with no use of tools except for the mainspring latch; which can be pulled down with a paperclip.
-Purchased June of this year. Upgraded to a Smith & Wesson M41 and don't shoot this gun anymore.
-There is approximately 3,500 rounds fired; all Federal AutoMatch.
Model: Mark III (Mk3, Mk III) Slab Side Competition 6-7/8" Barrel
Caliber: 22 LR (22lr)
Location: Southern California
Price: 650 FIRM
Other info:
Ruger Mark III Competition Slab Side Target Model with 6-7/8" Barrel.
-Volquartsen Competition Pistol Kit; includes replacement of all frame components; sear, disconnect, trigger, trigger bar, slide release, etc. Trigger is fully adjustable for pre travel and over travel stop.
-Original wood target grips, plus aluminum hogue grips in silver, plus Altamont wood target grips in silver with finger grooves.
-4 magazines included
-Loaded Chamber Indicator (LCI) stainless steel filler installed.
-Magazine disconnect removed by the Volquartsen Competition Pistol Kit.
-Bolt upgraded with Volquartsen Exact Edge Extractor.
-HiViz front sight included (not shown installed).
-All original parts are shown in the pictures and are included if you wish to return the gun to stock. Original Ruger hard case, weaver rail, all paperwork, LCI, extractor, internals, etc are included.
-Only blemish on this gun is at the butt of the gun where the mainspring housing latch is.
-When this was first purchased it took a very long time to break in the field stripping process. Used to have to use a rubber mallet, wooden dowel, etc. Now it can be done by hand with no use of tools except for the mainspring latch; which can be pulled down with a paperclip.
-Purchased June of this year. Upgraded to a Smith & Wesson M41 and don't shoot this gun anymore.
-There is approximately 3,500 rounds fired; all Federal AutoMatch.
Last edited:
