Gun oil help...thanks....

[dben002]

Although I have owned quite a few handguns, I really don't know what I should know about gun oils (lube's etc..etc...).

I have always used REM oil because when I first got into handguns that was what was recommended and it has always seemed to do fine but that may be a misconception due to my lack of knowledge.

Now have the new Shield 45 and any information anyone can pass along about oil's to protect it would be appreciated.

Thanks again....

 

[Rpg]

No reason to use anything new : the Rem oil will work just fine.

So will sewing machine oil.

 

[dben002]

No reason to use anything new : the Rem oil will work just fine.

So will sewing machine oil.

Thanks......

 

[Cardboard_killer]

No reason to use anything new : the Rem oil will work just fine.

I liked the post, but would add that there better choices for rust prevention if you are in a harsh environment.

I point people to this article for lots of testing detail. It's pretty cool. http://www.dayattherange.com/?page_id=3667

But in the end, Rem Oil will work fine for lubrication, so don't stress it.

 

[armorer951]

Way too much hype about oil. Most of the "new and improved" oils, lubricants, and cleaners are a way of separating you from your hard earned money.

Keep the gun clean, be mindful of oil viscosity issues, aspecially on very cold climates. Enjoy, shoot and maintain them.....repeat.

 

[bigwheelzip]

I use a gun oil:
Hoppe's 9 - The Gun Care People
and on my semi-auto sliding surfaces, a gun grease syringe:
Defense : 01. TW25B grease 0.5 oz reclosable syringe
Refill the syringe from a 4 oz tube.

I found the synthetic grease on sliding surfaces stays where you put it and keeps lubricating. Oil runs when it gets hot, during long shooting sessions. YMMV

 

[mauser9]

Like the Rem oil too but Breakfree CLP is my go to also

 

[OLDSTER]

Rem-Oil is just fine. Don't let anyone talk you into Frog Lube.

 

[gwpercle]

It's not rocket science, don't overthink it. Remoil is great stuff , I seem to go to it often. 3 in 1 oil gets overlooked , but is still a good oil. Hoppe's Elite has little or no smell to it...sometimes that's important.
If you need an inexpensive oil, take 4 parts Marvel Mystery Oil and 1 part Dexron (GM) ATF and mix together. Put it in a spray bottle and use like a CLP , it's actually a good lubricant .

Before you buy any oil or cleaner, smell it ! A buddy , with a gunshop, raved about Cleanzoil , how great and wonderful it was , so I bought a BIG bottle. The stuff just REEKS...it has some strange odor that I just can't get over...it stinks and I have tried to use the stuff but my wife wont let a gun lubed with it in the house.....and shes right ...it smells BAD inside.
So smell it before you buy it !
The Blaster lubes , found at big home improvement stores is a good lube also, the regular oil type and the dry lubricant stuff also.
Gary

 

[vmumford]

If you need an inexpensive oil, take 4 parts Marvel Mystery Oil and 1 part Dexron (GM) ATF and mix together. Put it in a spray bottle and use like a CLP , it's actually a good lubricant .

And it smells good too

 

[Laketime]

Despite all the hype you may hear here about other products,Rem oil is still the best for short and long term storage.This come from someone who has kept guns in deep storage for more then five years without an issue.I especially like the fact that you can really soak the actions,without the fear of it gumming up.Really, what more does anyone need in a gun oil.

 

[Mister X]

Considering it's stainless steel with a melonite finish, it really doesn't need much in the way of protection. Literally pretty much anything would work fine. I would honestly be more concerned about exposure to nasty chemicals.

I use plain USP mineral oil on my Glocks and stainless S&W revolvers and never had any issues or concerns and FWIW, Hoppes #9 lubricating oil is nothing more than straight mineral oil and people have used it for decades.

 

[Absalom]

Several decades of living and carrying year-round in the rather moist environment of the Pacific Northwest have convinced me that most people overthink this topic. Making sure the gun is free of moisture at the end of the day, I have not yet managed to get any rust on a gun. And I make a point of keeping barrel and chambers of actively carried guns completely dry; just a few drops of Remoil in the action and on actual friction surfaces, wipe the outside down with a silicone cloth, done. Just don't sweat it.

 

[G.T. Smith]

this stuff 6 bucks a quart.

I really think that people tend to over lubricate their guns. I used to do just that. If a gun is really clean, it doesn't need a whole lot. Rem oil is good but I like to use this old military oil. I've used it for a long time and never had a rust or corrosion problem. Peace,
Gordon

 

[Jboutfishn]

I like synthetics. Grease on the rails, oil on everything else.

 

[apollo99]

8 parts 5W30 mobil one, 1 part non-detergent atf. Works on my 1911's,revolvers and AR-15's

 

[delta-419]

Rem Oil

Most of my guns are over 80+ years old and work just as manufactured. They came along when about all you had as a lube was 3in1 oil. I still have a can of it, but it sits next to the Rem Oil. Good cleaning on a regular basis is the key healthy guns !!!

 

[chief38]

We ALL have our fav's and as you can see by the responses, ask 10 people and get 10 different answers.

Personally I like Rig #2 Oil, and use Remoil also from time to time. Truth be told, as long as you use an Oil that's a name brand and has stood the test of time with the gun buying public, it should be just fine. Unless you are gonna leave your blued gun in the snow for a week, or take it swimming in the ocean, you will be good with any of the tried and try potions that have longevity. The most important thing is to actually use it sparingly, correctly and often.

 

[emdfan]

I'm partial to Rig #2, Rem Oil, or M-Pro7 LPX. I prefer thinner oils where the carrier evaporates, leaving a protective film behind or the oil is more of a light film like LPX. These oils also don't offend my wife's nose, meaning I can sit on the couch and clean while watching TV. I clean with M-Pro 7 Gun Cleaner, which is basically scentless and non-toxic. It also harms no gun metal finishes.

I also tend to use the Walmart test: can I reliably get it at Walmart and not have to special order it? I tend to favor what I can source locally. While Walmart does not carry Rig #2, my local LGS (on the same street) has a shelf full of RIG products. I prefer RIG #2 because it's harmless to any and all gun finishes. Like any solvent/oil, keep away from real wood stocks.

 

[diegobxr]

I also use M-Pro 7 Gun Oil.
It's basically scent-less. If you really put your nose against the oily rag it has a pleasant "gun store" smell. But otherwise it goes unnoticed.

It's just oil, though. Don't sweat it too much. I wouldn't mind using Rem Oil, Hoppe's, Birchwood, whatever is available and cheaper.

 

[chief38]

As emdfan states above, I love the fact that the Rig #2 is harmless to all gun finishes, materials and accouterments. I also like that it is low on the toxic list as compared to more aggressive solvents and chemicals and you don't have to wear a mask while using it.

For the folks here that routinely and regularly clean their guns very aggressive chemicals are NOT needed. Those are reserved for the guys who rarely clean their guns and let lead, copper and powder residues get out of hand.

 

[JJEH]

I like Royal Purple and that's all I use...

 

[Nightowl]

I really like the smell of Browning gun oil spray. It seems to be hard to find so most of the time I just buy Remoil.

 

[gman51]

I saw Wilson Combat perform a bearing test on several gun oils and Rem oil had very poor friction wear test. My LGS offered me a can of Rem oil and I said no thanks.
I use Wilson Combat Ultima Lube II. I cleaned and oil two guns of some friends and they couldn't believe how noticeable the slide movement was.
I often wonder if it isn't synthetic auto transmission fluid. I do know it works very well. I have thought about doing a comparison to see if one performs better than the other. I am sold on synthetic oils due to their impregnating the metal qualities.
Would I use Rem oil? I turned down a free can so that should tell you something.

 

[Gunsguna]

I saw Wilson Combat perform a bearing test on several gun oils and Rem oil had very poor friction wear test. My LGS offered me a can of Rem oil and I said no thanks.
I use Wilson Combat Ultima Lube II. I cleaned and oil two guns of some friends and they couldn't believe how noticeable the slide movement was.
I often wonder if it isn't synthetic auto transmission fluid. I do know it works very well. I have thought about doing a comparison to see if one performs better than the other. I am sold on synthetic oils due to their impregnating the metal qualities.
Would I use Rem oil? I turned down a free can so that should tell you something.

I am with you, gman. The cost isn't prohibitive. It's great stuff. I won't use anything else. It works great and for about $10 for 4 oz's... it'll last a long time.

 

[patrickd]

In the end just be sure whatever you use won't gum up and harden over time. Old fashioned 3in1 machine oil is great stuff.
I should add that most of your everyday "gun" oils won't protect long term in storage like a light duty grease will. When I put my duck gun away for the season It won't come back out till next September. I'll be wiping it down with a decent coat of RIG Universal Grease. I've never had a gun rust in storage with the RIG grease. It's also better stuff for sliding parts lube than plain oil.