I loaded the half moon clips for my 625-8, now for the life of me I can't get the empties out of the clips, tried the demooner that came with the gun, still no good.......
Half moon clips
- Thread starter jculloden
- Start date
Register to hide this ad
There is always the old tried and true method. A vise-grip on the clip, a long-nose drop-nose plier in the case. Crude and slow but effective.
OP
Old tried and true works every time......
Last edited:
- Joined
- Apr 4, 2006
- Messages
- 19,394
- Reaction score
- 30,451
I saw a new fangled devise just 2 days ago that both loads them and unloads them with a simple quarter turn. Takes seconds! Sorry I don’t know the name of it, but if you search I’m betting you would find it.
Personally I never cared for them, but that’s a different story.
Personally I never cared for them, but that’s a different story.
Last edited:
Some have improvised, and IIRC, using approximately 6" of 1/2" copper tubing and a few wraps of electrical tape (optional) on the handle.
Requires means to hold firmly (vice) and hacksaw. Nice to have file or sandpaper to debur.
Requires means to hold firmly (vice) and hacksaw. Nice to have file or sandpaper to debur.
Protocall_Design
Member
The tools mentioned in post 5 and 6 don't work on 1/2 moon clips, only full moons.
Sid V.
Member
An old 1911 barrel works well to pull the cases off.
DWalt
Member
I use the inside corner of a steel GI ammo can.
rockquarry
Member
- Joined
- Aug 9, 2005
- Messages
- 8,573
- Reaction score
- 10,537
Auto Rim brass remains a practical solution to clip woes.
OP
rockquarry
Member
- Joined
- Aug 9, 2005
- Messages
- 8,573
- Reaction score
- 10,537
Starline may be the only source nowadays, but it's good brass. I'm using it along with some old Remington Auto Rim that I'm having a hard time wearing out.
Similar threads
- Locked
