shutupdata113
Member
I am looking real hard at the shield 45 for carry. I don't hear too much about this firearm anymore. I guess no news is good news as they say. Any insight from current owners\carriers would be appreciated. Thanx.
Is the shield .45 good to go?
- Thread starter shutupdata113
- Start date
I don’t know of anyone who has trouble with one. (You can read about anything on the internet if you look long enough.) Most folks seem to say they are surprisingly accurate and don’t recoil as much as expected. Based on my limited experience, I agree with that.
Here's a link to a thread I started about a year ago, with some info on the Shield 45:
Long-Term Report on M&P 40c, Shield 9, & Shield 45
Bottom Line: It's a fine gun!
Long-Term Report on M&P 40c, Shield 9, & Shield 45
Bottom Line: It's a fine gun!
edubbie
Member
I'm one that has not had any issues and feel they are surprisingly accurate and don't recoil as much as expected. My favorite pistol. Only complaint is finding ammo. Seems 9mm is slightly easier to find but even that is difficult.
Another +1 for the Shield 45. Accurate and controllable.
Kansasgunner
SWCA Member
- Joined
- Apr 13, 2012
- Messages
- 1,372
- Reaction score
- 7,007
I bought a pair of 45 Shields with night sights in August 2018. Ran 250 rounds thru each one with no issues. I carry one regularly and one gets nightstand duty. Rotate them occasionally. Never had an issue with either one. Accurate, reliable, easy to shoot great guns.
I found mine to be more accurate and easier to carry than expected. The recoil was manageable enough that my teenager didn't mind shooting it either. I also like the grip surface, which seems to make it handle better than other pistols of the same size. I don't really see a downside.
ultratec00
Member
- Joined
- Jul 5, 2011
- Messages
- 754
- Reaction score
- 335
I own two Shield 45s. One with, one without, a light. Both are exceptionally accurate, and reliable, for a lightweight/short barrel polymer 45. Either one will consistently group 4", or less, offhand at 25 yards. Apex trigger (not sear), SSguide rod, ameriglo I-Dots, and 185 JHPs pushing ~800-900 fps. Did polish a few areas, but the stock sear and striker block cleaned up quite nice. Can't emphasize enough to how important it is to match the ammo to the firearm.
p8riot
US Veteran
Been carrying one for a couple of years with zero problems. Recoil is very manageable, good trigger, quite accurate for such a short barrel.
Bozz10mm
US Veteran
I've got 1600 rounds through mine. Very reliable and accurate. No complaints at all.
Echo40
Member
- Joined
- Sep 25, 2017
- Messages
- 4,030
- Reaction score
- 7,821
Typically you don't hear anything about a firearm a few years after it has been released, it gets a lot of attention when it's new, then it slowly fades away, even if it remains successful and people in general like it.
Besides, single-stack .45s aren't all the rage right now, most folks are into high capacity subcompact 9mms like the SIG P365 or Springfield Armory Hellcat right now. So the Shield in general has lost some steam, and many anticipate that Smith & Wesson will make their own entry into that niche shortly.
That being said, the M&P45 Shield is a fantastic carry firearm which by all accounts is surprisingly soft-shooting for such a lightweight .45 ACP pistol. Furthermore, in the unfortunate event in which the AWB is reinstated like certain politicians are pushing for, then the M&P45 Shield will be exempt and therefore is likely to skyrocket in demand, so if you're thinking of getting one, then it's best to do so sooner rather than later.
I was actually looking to buy an M&P45 Shield as a new Summer Carry gun as well as an alternative primary EDC in the event that the AWB does make a comeback, but ended up getting an Performance Center M&P40 Shield instead because I happened upon a deal that was too good to pass up, and obviously I'm a fan of .40 S&W anyway.
Besides, single-stack .45s aren't all the rage right now, most folks are into high capacity subcompact 9mms like the SIG P365 or Springfield Armory Hellcat right now. So the Shield in general has lost some steam, and many anticipate that Smith & Wesson will make their own entry into that niche shortly.
That being said, the M&P45 Shield is a fantastic carry firearm which by all accounts is surprisingly soft-shooting for such a lightweight .45 ACP pistol. Furthermore, in the unfortunate event in which the AWB is reinstated like certain politicians are pushing for, then the M&P45 Shield will be exempt and therefore is likely to skyrocket in demand, so if you're thinking of getting one, then it's best to do so sooner rather than later.
I was actually looking to buy an M&P45 Shield as a new Summer Carry gun as well as an alternative primary EDC in the event that the AWB does make a comeback, but ended up getting an Performance Center M&P40 Shield instead because I happened upon a deal that was too good to pass up, and obviously I'm a fan of .40 S&W anyway.
I have Shields in 9/40/45. All have been flawless. Going to town I carry the 9 for compactness. All other times I carry the 45 as I like it best And I shoot cast lead bullets in all 3.
BTW I don't need a concealed handgun that holds a bazillion bullets, The Shields hold enough. I ever carry a revolver too.
Notice. Since the 9 is having it's day in the sun. People want one that holds a bazillion bullets........Stick with a bigger caliber .......Where less is more.
BTW I don't need a concealed handgun that holds a bazillion bullets, The Shields hold enough. I ever carry a revolver too.
Notice. Since the 9 is having it's day in the sun. People want one that holds a bazillion bullets........Stick with a bigger caliber .......Where less is more.
Last edited:
OP
shutupdata113
Member
So I Went ahead and plunked down moolah on a new shield 45! I can't wait to see how she carries and shoots. Seems like a nice addition to the stable. Thank you folks.
IF all else fails, this is one of the easiest to shoot loads for defense.
Premium 45 ACP Ammo For Sale - 165 gr Hydra Shok JHP - Federal Premium Defense Ammunition In Stock - 20 Rounds
Premium 45 ACP Ammo For Sale - 165 gr Hydra Shok JHP - Federal Premium Defense Ammunition In Stock - 20 Rounds
WickedWally
Member
I can't seem to find the one I'm interested in, the PC 2.0 with tritium night sights (model#12474). My hope is that the ported barrel would reduce some of the recoil, as I have a somewhat reconstructed right thumb from an old motorcycle accident. None of my local shops will take any money from me because they can't say how long the wait is, and I live five miles from the Smith & Wesson factory.
I have a standard and PC45 Shield. Like others I’m amazed at the accuracy and controllability . Shooting them back to back I can’t really tell much difference in muzzle rise etc. I don’t really notice much of a difference in muzzle flash either and that’s mostly with 230gr HST’s .
My PC Shield came with the factory tritium sights. I ended up replacing the sights on both Shields with Trijicon HDs with orange front . For me the HDs are way easier to pick up then the factory tritium sights.
I love the 45’s so much I sold my 9mm Shields .
When I think about it the porting on the 9mm Shield seemed to make more of a difference then on the 45PC.
The little longer 45 grip fits my hand perfect. I was hoping that the 2.0 9mm Shields would have the slightly longer grip of the 45’s.
I’m left handed and was involved in a H&R bicycle/ car accident . Several years ago. With a lot of damage to my left arm/wrist/ fingers. I’m always amazed whenever I shoot one of my 45 Shields at how comfortable they are. I bet you will really like either the standard or PC45.
You won't find any significant recoil reduction with the ported barrel in a relatively low pressure .45. Buy a non ported one and enjoy it.
I could tell a slight difference in the .40, but not in the ported/non ported Shields I've shot in 9mm or 45.
I bought one of the first 45 Shields back in 2016, but ended up going with a PC40 as my fullsize M&P was in 40.
Got another .45 last spring and I'm glad I did.
Accurate, nice trigger and easy to control.
I add TFO sights to all my M&Ps, and because I'd rather have a light and not need it, than find I need a light and not have one handy, mine has a LaserMax light and green laser.
Nice compact unit and can be found on Amazon for $160.
http://smith-wessonforum.com/smith-...asermax-grip-sense.html?627518=#post140882109
I could tell a slight difference in the .40, but not in the ported/non ported Shields I've shot in 9mm or 45.
I bought one of the first 45 Shields back in 2016, but ended up going with a PC40 as my fullsize M&P was in 40.
Got another .45 last spring and I'm glad I did.
Accurate, nice trigger and easy to control.
I add TFO sights to all my M&Ps, and because I'd rather have a light and not need it, than find I need a light and not have one handy, mine has a LaserMax light and green laser.
Nice compact unit and can be found on Amazon for $160.
http://smith-wessonforum.com/smith-...asermax-grip-sense.html?627518=#post140882109
WickedWally
Member
Thanks, Sandog. I was going to inquire about the night sights S&W offers on the PC 2.0 .45, as this is the model I'm looking for. They don't say who's they use, just that they're tritium. Was wondering if it would be more cost effective to buy the version without, and purchase aftermarket ones. That is, if they're better.
Usually upgrades included with the gun are more cost effective than buying them outright later.
Not sure who's Tritium sights S&W uses but I'd guess they are either Trijicon or Meprolight.
Nothing wrong with either of those.
The Fiber optic part of the TFOs really pop in the daylight.
After the light fades that F/O 'glow" is gone, until it gets to full darkness and then the Tritium part takes over.
One set of sights I really like are the Ameriglos on my G48.
The front sight really stands out in the day, with that red/orange ring around it.
And the front sight is what matters most.
But at night the Ameriglos glow all the same, same green and same intensity.
I like how some brands like the Tru Glo have a different colored front sight, and that front sight glows brighter than the back two lamps.
But that is only noticeable at night, and you'd be using a hand held or gun mounted light to ID your target first anyway.
The Tru Glo TFOs ( not the Pros which are more $$$) are only about $68 for the set on Amazon, so not going to break the bank.
Here are the TFOs on an M&P .45:
And on an M&P .40:
If you decide to go aftermarket, be aware that the factory sights are on really tight, at least the front one is.
A sight pusher is the way to go, but not just any old sight pusher.
I bought a $130 one from Brownell's (B&J machine) and it wouldn't begin to budge the front sights on any of the M&Ps I changed sights on.
I sold that pusher, and got the install done with a brass sight punch and hammer, but there is no room for error with that method.
Slip and you might damage the sight or mar the finish on your slide.
Not sure who's Tritium sights S&W uses but I'd guess they are either Trijicon or Meprolight.
Nothing wrong with either of those.
The Fiber optic part of the TFOs really pop in the daylight.
After the light fades that F/O 'glow" is gone, until it gets to full darkness and then the Tritium part takes over.
One set of sights I really like are the Ameriglos on my G48.
The front sight really stands out in the day, with that red/orange ring around it.
And the front sight is what matters most.
But at night the Ameriglos glow all the same, same green and same intensity.
I like how some brands like the Tru Glo have a different colored front sight, and that front sight glows brighter than the back two lamps.
But that is only noticeable at night, and you'd be using a hand held or gun mounted light to ID your target first anyway.
The Tru Glo TFOs ( not the Pros which are more $$$) are only about $68 for the set on Amazon, so not going to break the bank.
Here are the TFOs on an M&P .45:
And on an M&P .40:
If you decide to go aftermarket, be aware that the factory sights are on really tight, at least the front one is.
A sight pusher is the way to go, but not just any old sight pusher.
I bought a $130 one from Brownell's (B&J machine) and it wouldn't begin to budge the front sights on any of the M&Ps I changed sights on.
I sold that pusher, and got the install done with a brass sight punch and hammer, but there is no room for error with that method.
Slip and you might damage the sight or mar the finish on your slide.
Last edited:
My experience was that the pistol was reliable and slim to carry. I did not like the porting on the barrel and slide and couldn't stand the "fiber optic" sights, sold it instead of putting money in new sights.
If I had to do it again, I'd get the plain model, a safety, and some conventional sights.
If I had to do it again, I'd get the plain model, a safety, and some conventional sights.
Similar threads
