tnmandpshooter
Member
- Joined
- Dec 23, 2018
- Messages
- 219
- Reaction score
- 245
This was built with a virgin pm63 parts kit from cugir from m+m industries. I always wanted an American made ak but the current offerings on the market left a lot to be desired.
It has the following us parts
1. Windham weaponry 4150 nitride barrel. (Super accurate thus far).
2. Athens Machine Tool forged 4140 steel front trunnion
3. Forged 4140 steel rear meridian defense m4 style rivet in trunnion
4. Meridian defense bd2 ak brake
5. Master mount safety
6. Red star arms hammer
7. Red star arms trigger
8. Red star arms disconnect
9. Red star arms retainer plate
10. Alg standard power trigger spring
11. ALG extra power recoil spring
12. Bcm qd end plate
13. Dpms castle nut
14. CNC warrior gas piston (hard chromed)
15. Magpul akm forend
16. Magpul moe + rubberized ak grip
17. Magpul ctr stock
18. Krebs rear aperture.
19. Rs regulate 301 lower
20. Rs regulate akml upper
21. Magpul gen m3 follower
22. Magpul gen m3 ranger plate
23. Magpul gen m3 magazine body.
24. Childers guns cg3 us made receiver
25. Tom's tactical 7075 t6 aluminum buffer tube
26. SOE gear single point bungee sling.
Foreign parts
1. Romanian forged bolt carrier
2. Romanian forged bolt
3. Polenar tactical red fiber optic front sight (ordered and shipped from Slovenia).
4. Holosun 503gu-fde
I also use circle 10 mags with arsenal us made followers and floor plates.
Muzzle brake, safety, qd end plate, and castle nut are all parkerized and then cerakoted Magpul FDE.
The barrel is bead blasted to remove the black oxide and then kg gunkote baked on od green. The receiver is parkerized and kg gun koted od green. The buffer tube is roughed up bead blasted aluminum and kg gun koted od green. The bolt and bolt carrier are parkerized and kg gunkoted od green.
Built by Troy Sellars at In Range Inc in Kodak TN.
I took the charging handle off because I didn't like it.
Sent from my SM-T550 using Tapatalk
It has the following us parts
1. Windham weaponry 4150 nitride barrel. (Super accurate thus far).
2. Athens Machine Tool forged 4140 steel front trunnion
3. Forged 4140 steel rear meridian defense m4 style rivet in trunnion
4. Meridian defense bd2 ak brake
5. Master mount safety
6. Red star arms hammer
7. Red star arms trigger
8. Red star arms disconnect
9. Red star arms retainer plate
10. Alg standard power trigger spring
11. ALG extra power recoil spring
12. Bcm qd end plate
13. Dpms castle nut
14. CNC warrior gas piston (hard chromed)
15. Magpul akm forend
16. Magpul moe + rubberized ak grip
17. Magpul ctr stock
18. Krebs rear aperture.
19. Rs regulate 301 lower
20. Rs regulate akml upper
21. Magpul gen m3 follower
22. Magpul gen m3 ranger plate
23. Magpul gen m3 magazine body.
24. Childers guns cg3 us made receiver
25. Tom's tactical 7075 t6 aluminum buffer tube
26. SOE gear single point bungee sling.
Foreign parts
1. Romanian forged bolt carrier
2. Romanian forged bolt
3. Polenar tactical red fiber optic front sight (ordered and shipped from Slovenia).
4. Holosun 503gu-fde
I also use circle 10 mags with arsenal us made followers and floor plates.
Muzzle brake, safety, qd end plate, and castle nut are all parkerized and then cerakoted Magpul FDE.
The barrel is bead blasted to remove the black oxide and then kg gunkote baked on od green. The receiver is parkerized and kg gun koted od green. The buffer tube is roughed up bead blasted aluminum and kg gun koted od green. The bolt and bolt carrier are parkerized and kg gunkoted od green.
Built by Troy Sellars at In Range Inc in Kodak TN.
I took the charging handle off because I didn't like it.
Sent from my SM-T550 using Tapatalk
Last edited:
