Will only sell where legal (i.e. high cap mags). Make sure your FFL will receive from a non-FFL. I will ship firearms with a copy of my license. First “I’ll take it” will trump all….can be by email or post. Please ask any questions. I can photograph any part of any of the guns. Will do a FTF in Illinois as long as buyer has a FOID card. I'm near St Louis for a FTF.
I will take partial trades on the Sig P229 Sport and the Beretta 85BB’s. Looking for:
1. Eotech EXPS3-0 or EXPS2 NIB/LNIB (no clones)(Black only)
2. Factory Glock 19 Threaded barrel with cap (M13.5 X 1LH)--New or Like New
3. Factory Sig P226 9mm Threaded barrel with cap (M13.5 X 1LH)--New or Like New
4. Surfire X300--NIB or LNIB
5. M1A Scout Squad w/composite stock
WTS a S&W 29 Classic in 44 Magnum. It has a 5” barrel, full lug and a low round count. The finish is a royal blue and is in excellent condition. Comes with 2xHKS loaders, extra hogue grips with the S&W monogram, S&W tool, NIB Triple K holster and an Uncle Mikes holster. Model is 29-6.
$750 shipped (I have SD ammo for purchase to the buyer)
WTS two Beretta 85BB’s in 380. Guns are in very good condition. Barrel of the pistol wearing the black plastic grips has a few scratches on the barrel. Comes with 2 x hard cases (one factory/one not), soft case, Beretta lock, 2 x manuals (one photo copy), Bianchi IWB holster, Galco holster/mag holder for a shoulder harness, 2 x single mag pouches, extra firing pin/firing pin spring/pin sear, hogue screws as well as factory screws, one plastic and one wood grips for each pistol and 10 x 8rd factory mags (4 blue/6 nickel).
$950 shipped for both pistols w/everything (I have FMJ and SD ammo for sale to the buyer)
or
$425 shipped each with 3 mags
WTS a Beretta 8000D in 9mm. An excellent condition DAO pistol that comes with factory hard case and outer cardboard box w/matching serial number, manual, Beretta lock, Factory plastic and wood grips, 4x10rd mags and 3x15rd mags (all mags are factory)
$450 shipped for the gun/all the mags pictured/box/manual/plastic grips/wood grips (anything not included here has been sold)
WTS a Beretta 8000F in 9mm. Gun is excellent condition and is DA/SA. Pistol comes with factory hard case, manual, factory plastic and wood grips (1 sets of wood grips), and 3x15rd factory mags.
$500 shipped with box/manual/all pictured mags/1 set wood grips/plastic grips (anything not included here has been sold)
WTS a Sig P229 Sport. I have kind of a strange one here. The sport barrel is in 357 sig and the extra stainless upper is in 40 S&W (I also have a factory 357 Sig barrel included). Serial numbers on the receiver/slide match the serial number on the box. Comes with factory box w/matching serial number, manual, compensator manual, compensator and adjustable sight tools, 2 x extra firing pins, extra recoil spring, extra compensator screw, recoil guide rod (sold by a member of this forum), standard P229 mag release button and slide stop (I installed these on the pistol and have included the factory Sport mag release and slide stop) , 4 x 12rd mags w/sport bases (factory), 4 x 10rd mags w/sport bases (factory) and 2 x 10rd standard P229 mags (factory). Everything is in great condition but it does have a mark on the grip (pictured below).
$1950 Shipped w/everything
or
$750 For the compensated sport slide w/tools/compensator paperwork
$950 For the Stainless frame/Stainles upper (standard p229 slide)/box/manual/4 x 10rd factory sport mags
The compensated slide needs to sell before the Stainless P229. The 12rd mags will be offered to the buyer of the Stainless P229 first and then will be listed seperately.
I will take partial trades on the Sig P229 Sport and the Beretta 85BB’s. Looking for:
1. Eotech EXPS3-0 or EXPS2 NIB/LNIB (no clones)(Black only)
2. Factory Glock 19 Threaded barrel with cap (M13.5 X 1LH)--New or Like New
3. Factory Sig P226 9mm Threaded barrel with cap (M13.5 X 1LH)--New or Like New
4. Surfire X300--NIB or LNIB
5. M1A Scout Squad w/composite stock
WTS a S&W 29 Classic in 44 Magnum. It has a 5” barrel, full lug and a low round count. The finish is a royal blue and is in excellent condition. Comes with 2xHKS loaders, extra hogue grips with the S&W monogram, S&W tool, NIB Triple K holster and an Uncle Mikes holster. Model is 29-6.
$750 shipped (I have SD ammo for purchase to the buyer)
WTS two Beretta 85BB’s in 380. Guns are in very good condition. Barrel of the pistol wearing the black plastic grips has a few scratches on the barrel. Comes with 2 x hard cases (one factory/one not), soft case, Beretta lock, 2 x manuals (one photo copy), Bianchi IWB holster, Galco holster/mag holder for a shoulder harness, 2 x single mag pouches, extra firing pin/firing pin spring/pin sear, hogue screws as well as factory screws, one plastic and one wood grips for each pistol and 10 x 8rd factory mags (4 blue/6 nickel).
$950 shipped for both pistols w/everything (I have FMJ and SD ammo for sale to the buyer)
or
$425 shipped each with 3 mags
WTS a Beretta 8000D in 9mm. An excellent condition DAO pistol that comes with factory hard case and outer cardboard box w/matching serial number, manual, Beretta lock, Factory plastic and wood grips, 4x10rd mags and 3x15rd mags (all mags are factory)
$450 shipped for the gun/all the mags pictured/box/manual/plastic grips/wood grips (anything not included here has been sold)
WTS a Beretta 8000F in 9mm. Gun is excellent condition and is DA/SA. Pistol comes with factory hard case, manual, factory plastic and wood grips (1 sets of wood grips), and 3x15rd factory mags.
$500 shipped with box/manual/all pictured mags/1 set wood grips/plastic grips (anything not included here has been sold)
WTS a Sig P229 Sport. I have kind of a strange one here. The sport barrel is in 357 sig and the extra stainless upper is in 40 S&W (I also have a factory 357 Sig barrel included). Serial numbers on the receiver/slide match the serial number on the box. Comes with factory box w/matching serial number, manual, compensator manual, compensator and adjustable sight tools, 2 x extra firing pins, extra recoil spring, extra compensator screw, recoil guide rod (sold by a member of this forum), standard P229 mag release button and slide stop (I installed these on the pistol and have included the factory Sport mag release and slide stop) , 4 x 12rd mags w/sport bases (factory), 4 x 10rd mags w/sport bases (factory) and 2 x 10rd standard P229 mags (factory). Everything is in great condition but it does have a mark on the grip (pictured below).
$1950 Shipped w/everything
or
$750 For the compensated sport slide w/tools/compensator paperwork
$950 For the Stainless frame/Stainles upper (standard p229 slide)/box/manual/4 x 10rd factory sport mags
The compensated slide needs to sell before the Stainless P229. The 12rd mags will be offered to the buyer of the Stainless P229 first and then will be listed seperately.
Last edited:
