Please post picture comparing target and regular hammers

[bushmaster1313]

How do I tell the difference between traget and regular hammers on a Model 27-2?

Thank you

 

[Ga Johnny]

I don't have any pictures handy right now, but it should be easy enough to tell simply by looking at them. target is 1/2" wide, standard is 3/8" wide,

 

[m1gunner]

There are plenty of pics on gunbroker.

 

[Gun 4 Fun]

Standard (or service if you prefer) hammers are .265" across the thumb spur area of the hammer, target hammers are either .400" or .500". There are also hammers referred to as semi target and they run .375" across the spur.

 

[Ga Johnny]

I thought the .265 hammer was unique to the M&P line of K frame guns and the smaller J frame guns, I don't recall ever having seen one on a N frame M27-2.

I thought the .375 was the standard, the .400 would be the semi target, and the .500 being the target

Gunner's right though.........easiest thing to do is look at gunbroker

 

[Retired W4]

From what I'm seeing the Model 27/The 357 Magnum used the .400" Semi-Target hammer from 1948 (as the pre-27) till 1975 and a .500" Target hammer from 1975 till 1994. Just measure the hammer. Ref: SCSW

 

[Gun 4 Fun]

I thought the .265 hammer was unique to the M&P line of K frame guns and the smaller J frame guns, I don't recall ever having seen one on a N frame M27-2.

I thought the .375 was the standard, the .400 would be the semi target, and the .500 being the target

Gunner's right though.........easiest thing to do is look at gunbroker

Yup, good catch. I flat missed seeing the 27-2 in the OP.

 

[Retired W4]

Pics

This is a 27-2 with the .500" target hammer. I was not able to dig out the .400" but I will post when I get to the gun. I have a 586 with a .375" semi-target hammer and it looks just like the '500" only that much narrower.

 

[Retired W4]

How do I tell the difference between traget and regular hammers on a Model 27-2?

Thank you

Bushmaster, do you have pictures of the 27-2 in question?