Pro-Shot Products Metal Care Cloth

[Jeff423]

This thing is amazing - an over used word, but true in this case. I used small (1" x 3")pieces on an Anaconda and a 629 and it easily removed all the smoke and soot from the cylinder. I had tried Hoppes, Remington Brite Bore, M Pro 7 cleaner, and the Birchwood Casey Stainless cloth. Of all those only the Birchwood Casey removed all the smoke and soot. But I think it is abrasive because you aren't supposed to use it on blued guns.

The Pro-Shot cloth seems to dissolve the soot/smoke chemically and almost instantly! It also worked great on my 15-3. It got all the soot out of the flutes and left the bluing.

I was going to try and figure out what was in in it, but I realized that using 3 square inches at a time this thing will last quite a while.

Jeff

 

[socal s&w]

I have had the exact same results using 'Nev'r-Dull', it's a mag wheel cleaner. It's some sort of cotton bail with chemicals in it that take the soot off in seconds with very little effort, does not leave a shine.

You can get this stuff at any auto store. A little goes a long way.

Stainless only!!

I posted about it a couple of weeks ago.