Sharing my 1911

Register to hide this ad
According to the Colt Shipping Records, S/N 159549 was shipped from Colt on 6/13/1917 to the Springfield Armory. This was in a block of 1000 pistols. It does not show up on the copy of the Springfield Research Service that I have. HTH.
 
Last edited:
Very cool old Colt! Why did they half-finish the mags like that?

Good question. I believe most, if not all, original magazines were done that way. I still have a lot to learn though.

I found the info below here.

https://coolgunsite.com/pistols/Magazines.htm

The earliest magazines (Step Base Bottom) do not appear to be two toned, but were heat treated and the halves show a slight difference in color. The type 1 magazine shows part of the bottom plate in the side view. These were used from serial #1 through about serial #4500. The second type magazine had a cut-out in the rear wall that allowed the sides to flex and avoided cracking the upper rear corners. The type II was used from about serial #4500 to serial #30000. The third type magazine had a lanyard loop as did the previous two types. The type III was used from about serial 30000 to about serial #130000. The type 4 magazine had no lanyard loop. And was used from about serial #130000 to the end of WWI. the All magazines where two tone until approximately 1940. Full blued magazines started shipping around serial number 719,753. Reference Charles Clawsons “Colt .45 Service pistols”.
 
Last edited:
Now you need a 1912 holster, Eagle Snap pistol belt with magazine pouch and early bandage pouch.

Like this? 😀



Here is my grandfather's unit in Germany just before the shipped out for home. All the enlisted men are wearing this same gear.



Here is this gun on my grandfather's uniform with his helmet and an excerpt from his journal.

 
Last edited:
Nice M1911! It's one that I would be proud to own. Your FIL is awesome for gifting this to you. Everything looks correct to me, except maybe the feed ramp. Can't tell because it's in shadow, but I think the feed ramp should be unfinished? After the parts were blued, Colt would grind the feed ramp, removing the finish. A blued feed ramp doesn't have good lubricity.
 
Nice M1911! It's one that I would be proud to own. Your FIL is awesome for gifting this to you. Everything looks correct to me, except maybe the feed ramp. Can't tell because it's in shadow, but I think the feed ramp should be unfinished? After the parts were blued, Colt would grind the feed ramp, removing the finish. A blued feed ramp doesn't have good lubricity.

Thanks for the info. Upon closer inspection I found that the feed ramp is blued. More to research here.

Looks like it is still probably an original finish. This is what I found on coolgunsite.com:

https://coolgunsite.com/pistols/finish.htm

Parkerized/blued bullet feed ramp finish:
Bullet feed ramps where blued in receivers to serial number 710,000, then at SN 710,001 they where machined after the receiver was blued or parkerized, leaving this area of the gun in the white and unfinished. This area should show machine marks and not be polished. In mid-1944 Colts bullet feed ramps where parkerized, this began at approximately SN 1700000.
 
Last edited:
I am thinking a bottle of Johnnie Walker Black.



I would also say you've done very well in your father-in-law. (You oughta buy him a nice bottle of booze, box of cigars, or whatever he would like. He deserves it!)

Hell, he took the guys daughter off his hands, he deserves the pistol, and probably more!

Kevin
 
Like this? 😀



Here is my grandfather's unit in Germany just before the shipped out for home. All the enlisted men are wearing this same gear.



Here is this gun on my grandfather's uniform with his helmet and an excerpt from his journal.


1912 is the hanging one, kinda hard to find these days. Eagle snap accessories have a “ Eagle button” instead of the lift the dot. Gave all mine to my son when downsizing.Early pistol belts have larger buckles.78E3AFC2-F0F4-41DA-944D-DD6BA9CAA16C.jpg
 
Last edited:
Back
Top