-
Forum Update: We've upgraded the software to improve security, performance, and the overall experience.
👉 Read why we made the change | Support the Forum
Show Me Your leather
- Thread starter phenson
- Start date
Register to hide this ad
153
Member
- Joined
- Feb 2, 2009
- Messages
- 911
- Reaction score
- 2,391
I was looking forward to watching this thread too ......
Rich in NM
Member
Superflywimpy
Member
Here's one box...
This is one of my favorites.
... and this one lives in my pocket (there's a back-up in the box).
This is one of my favorites.
... and this one lives in my pocket (there's a back-up in the box).
Smith357
US Veteran
I have this holster for my Model 14 custom made by Mr. David Newcomb.
au2183
Member
I have this holster for my Model 14 custom made by Mr. David Newcomb.
That's one fine looking holster! The gun is not too shabby either. Love those long barrels. Someday I hope to luck into a K 22 in 8 3/8. How does the sheepskin lining work out for you? Seems like it would keep from getting any marks or wear on the gun's finish at all. Do you have contact info for the gentleman that made it? I would love to have one to fit a 6" K 22.
I ordered this rig for a 4" Combat Masterpiece 40 years ago from S.D. Myres.That's a pre-model 19 in it-I still wear this almost every time I shoot.
Regards,
Regards,
Glock 'em down
Member
I ordered this rig for a 4" Combat Masterpiece 40 years ago from S.D. Myres.That's a pre-model 19 in it-I still wear this almost every time I shoot.
Regards,
Now THAT'S a gorgeous rig!
In this world of synthetics, nylon and Kydex, it's so nice to see a vintage cowhide setup like that.
Bravo!
OK, I'll play
Here's my 24-3 with El Paso Saddlery holster, the belt is a money belt from a custom maker that I've forgotten who he is. It is extremely soft and I wear it all the time.
Then my 25-5 with the same rig and my always hunting knife in a custom shark skin sheath .
Next is my 27-2 in a George Lawrence rig, the BBQ rig that is.
For the evening out, suit and tie event, there's the Baby Cheif and a Berns Martin Lightning rig. Continued in next reply as I've reached the 5 pics maximum.
Here's my 24-3 with El Paso Saddlery holster, the belt is a money belt from a custom maker that I've forgotten who he is. It is extremely soft and I wear it all the time.
Then my 25-5 with the same rig and my always hunting knife in a custom shark skin sheath .
Next is my 27-2 in a George Lawrence rig, the BBQ rig that is.
For the evening out, suit and tie event, there's the Baby Cheif and a Berns Martin Lightning rig. Continued in next reply as I've reached the 5 pics maximum.
Attachments
Last edited:
OK, I'll play part 2
For the evening out, suit and tie event, there's the Baby Cheif and a Berns Martin Lightning rig. Continued from previous reply as I had reached the 5 pics maximum.
After that is some other maker's sixshooter in 44 Special and a F A Meana holster.
And last is a USFA from Doug Turnbull in 44 WCF in the same Meana holster.
For the evening out, suit and tie event, there's the Baby Cheif and a Berns Martin Lightning rig. Continued from previous reply as I had reached the 5 pics maximum.
After that is some other maker's sixshooter in 44 Special and a F A Meana holster.
And last is a USFA from Doug Turnbull in 44 WCF in the same Meana holster.
Attachments
Dan Cash
Member
My rig
Here goes with my first pictures; I hope it works.
The rig was made for me by Dave Urlacher of Dickinson, ND. He is a master saddle maker and not too bad at holsters either. I have three holsters of the same pattern for 4, 5 and 6 inch guns. this is my working rig and is starting to get some scuff marks but that is what I bought it for.
Here goes with my first pictures; I hope it works.
The rig was made for me by Dave Urlacher of Dickinson, ND. He is a master saddle maker and not too bad at holsters either. I have three holsters of the same pattern for 4, 5 and 6 inch guns. this is my working rig and is starting to get some scuff marks but that is what I bought it for.
Attachments
borntoraisehogs
US Veteran
- Joined
- Jan 6, 2003
- Messages
- 430
- Reaction score
- 43
Oh dear . I see now you said custom leather , not some old S&W hide , safariland for my Trooper . Can I at least ask you to consider My Milt Sparks for my Kimber semi custom since they made it to my order and I had to wait for it ? Darn Idaho people , you can't take us anywhere without us embarrassing everybody .
CH47gunner
US Veteran
Not exactly an 1869 to 1961 rig.
Here's another custom Black Hills Leather rig. It's the "Tombstone" model that I had them do, for my 629 Classic 5".
Nice rig but, it's more of a "Sunday go to meetin'" rig.
And a H.H. Heiser for my M19-3 4".
And one of my favs, an Idaho Leather which I was hoping would fit a 6" Highway Patrolman, it didn't. But it fit a Ruger MKII perfectly.
Bruce
Here's another custom Black Hills Leather rig. It's the "Tombstone" model that I had them do, for my 629 Classic 5".
Nice rig but, it's more of a "Sunday go to meetin'" rig.
And a H.H. Heiser for my M19-3 4".
And one of my favs, an Idaho Leather which I was hoping would fit a 6" Highway Patrolman, it didn't. But it fit a Ruger MKII perfectly.
Bruce
Here's mine
Oops, missed yhe word "custom" as well. Sorry.
Oops, missed yhe word "custom" as well. Sorry.
Last edited:
OP
phenson
US Veteran
I agree
That is one nice rig!
That is one nice rig!
Now THAT'S a gorgeous rig!
In this world of synthetics, nylon and Kydex, it's so nice to see a vintage cowhide setup like that.
Bravo!
Glock 'em down
Member
Oh dear . I see now you said custom leather , not some old S&W hide , safariland for my Trooper . Can I at least ask you to consider My Milt Sparks for my Kimber semi custom since they made it to my order and I had to wait for it ? Darn Idaho people , you can't take us anywhere without us embarrassing everybody .
Who made the thumb break holster at the top of the picture? Is it a Safariland model 29? I likey!
Wyatt Burp
Member
I made this for DanM here on the forum.
