** SOLD ** FS/FT: (2x) Springfield 5.25" XDm .40 Limited Gun Packages, Holster Setup
Everything sold on another forum
I literally just built these, but changing life circumstances (and a sudden love for thicc Italian firearms) means I need to prioritize room in the safe over everything else. Having said that, there are a few trades I'm interested in that I will list at the end.
I can work with you on price if you're interested in both guns, or one with the holster, etc. - just let me know! I'd hugely prefer PP F&F for payment but I may be able to accommodate something else if that doesn't work for you. Feel free to ask any and all questions and thanks for taking a look!
Package #1 - Silver 5.25" XDm in .40 S&W - $489 Shipped
I ran this gun in two USPSA matches and it performed flawlessly. It's pretty dialed-in and has a bunch of go-fast (and/or look-cool) parts installed:
Included is a pile of factory and spare parts: stock auto-takedown and trigger parts, mag release, takedown lever, slide release, striker plate, backplate, front sight, guide rod, and recoil spring. Also included is one extra PRP striker retaining pin and a bunch of factory pins, one new Wolff 14lb recoil spring and one slightly-used 16lb spring, and all the extra parts from the PRP trigger, all the factory mag parts.
Package #2 - Black 5.25" XDm in .40 S&W - $389 Shipped
I picked this up as a backup. It had maybe a few hundred rounds on it and I added a few hundred more to get it tuned up but it really hasn't been shot much. This one has:
This one also includes a pile of factory and spare parts: stock auto-takedown and trigger parts, takedown lever, mag release, guide rod, and recoil spring. Also included are a bunch of factory pins, one new Wolff 14lb recoil spring and one slightly-used 18lb spring, two reduced power striker springs, a PRP competition trigger spring, the striker and trigger springs from the Springer kit (I preferred the feel of the factory ones), and two punches.
Holster Package - $125 Shipped
I had Redhill Tactical make a "3-Gun"-style holster for these guns when wearing an Olight Baldr Pro R. The holster has a blood red inner layer, a light gray carbon fiber outer layer, stainless knobs, and is attached to a Safariland mid-ride drop/offset. It's drilled to work with all Safariland mounts that use the longer QLS pattern. It has enough clearance to work with the GoGun thumbrest and should actual work with any full-size 9mm/.40 XDm as long as the light is installed since they all have the same frame.
I'm also including a lightly used Baldr Pro R to work with the holster. These lights are rechargeable, crazy bright, and have the option to project a light, a green laser, or both.
Trades:
What I really need is space... buuuuut there are some things I'd have a hard time saying "no" to. We could negotiate for one or both guns, plus cash on either end if it makes sense. I'm interested in large-frame Tanfoglio's (especially in .40), Chiappa Rhino's in .357 (5" or 6"), or snubnose revolvers with removable front sights (don't have to be S&W). Maybe other cool revolvers or steel-framed CZ's, as well.
Everything sold on another forum
I literally just built these, but changing life circumstances (and a sudden love for thicc Italian firearms) means I need to prioritize room in the safe over everything else. Having said that, there are a few trades I'm interested in that I will list at the end.
I can work with you on price if you're interested in both guns, or one with the holster, etc. - just let me know! I'd hugely prefer PP F&F for payment but I may be able to accommodate something else if that doesn't work for you. Feel free to ask any and all questions and thanks for taking a look!
Package #1 - Silver 5.25" XDm in .40 S&W - $489 Shipped
I ran this gun in two USPSA matches and it performed flawlessly. It's pretty dialed-in and has a bunch of go-fast (and/or look-cool) parts installed:
- Powder River Precision trigger kit
- PRP enhanced striker retaining pin
- GoGun thumbrest
- Dawson ICE magwell (#3 backstrap) and fiber optic front sight (same height as stock, just skinnier)
- Springer aluminum slide release, extended mag release, and striker plate (all silver), Springer aluminum backplate (red)
- Wolff 14lb recoil spring, Springer stainless guide rod
- Talon grip tape
- (2x) factory 16-round mags with Springer extensions and Grams guts (~20 round capacity)
- (2x) factory 16-round mags with Springer baseplates
- (2x) ProMag 15-round mags (1 with a UTG baseplate)
- Springfield hard case, all three factory backstraps, holster, mag holders, mag loader, paperwork
- Auto-takedown removed
Included is a pile of factory and spare parts: stock auto-takedown and trigger parts, mag release, takedown lever, slide release, striker plate, backplate, front sight, guide rod, and recoil spring. Also included is one extra PRP striker retaining pin and a bunch of factory pins, one new Wolff 14lb recoil spring and one slightly-used 16lb spring, and all the extra parts from the PRP trigger, all the factory mag parts.
Package #2 - Black 5.25" XDm in .40 S&W - $389 Shipped
I picked this up as a backup. It had maybe a few hundred rounds on it and I added a few hundred more to get it tuned up but it really hasn't been shot much. This one has:
- Springer Precision trigger kit (I think I gave the trigger a little too much overtravel but I wanted guaranteed ignition on the backup gun)
- Springer flat-faced aluminum trigger
- PRP enhanced striker retaining pin
- GoGun thumbrest
- Dawson ICE magwell (#2 backstrap) and fiber optic front sight (same height as stock, just skinnier)
- Springer extended mag release
- Wolff 14lb recoil spring, Springer stainless guide rod
- Talon grip tape
- (2x) factory 16-round mags with Springer extensions and Grams guts (~20 round capacity)
- (2x) factory 16-round mags with Springer baseplates
- (1x) ProMag 15-round mag with a UTG baseplate
- Springfield hard case, stock #2 backstrap, paperwork. Note that this case is from a different XDm so the serial on the side doesn't match the gun.
- Auto-takedown removed
This one also includes a pile of factory and spare parts: stock auto-takedown and trigger parts, takedown lever, mag release, guide rod, and recoil spring. Also included are a bunch of factory pins, one new Wolff 14lb recoil spring and one slightly-used 18lb spring, two reduced power striker springs, a PRP competition trigger spring, the striker and trigger springs from the Springer kit (I preferred the feel of the factory ones), and two punches.
Holster Package - $125 Shipped
I had Redhill Tactical make a "3-Gun"-style holster for these guns when wearing an Olight Baldr Pro R. The holster has a blood red inner layer, a light gray carbon fiber outer layer, stainless knobs, and is attached to a Safariland mid-ride drop/offset. It's drilled to work with all Safariland mounts that use the longer QLS pattern. It has enough clearance to work with the GoGun thumbrest and should actual work with any full-size 9mm/.40 XDm as long as the light is installed since they all have the same frame.
I'm also including a lightly used Baldr Pro R to work with the holster. These lights are rechargeable, crazy bright, and have the option to project a light, a green laser, or both.
Trades:
What I really need is space... buuuuut there are some things I'd have a hard time saying "no" to. We could negotiate for one or both guns, plus cash on either end if it makes sense. I'm interested in large-frame Tanfoglio's (especially in .40), Chiappa Rhino's in .357 (5" or 6"), or snubnose revolvers with removable front sights (don't have to be S&W). Maybe other cool revolvers or steel-framed CZ's, as well.
Last edited:
