SpartanDCI
Member
Clearing out a bunch of stuff for other projects. All items are new unless stated. If you need better pics, just PM me. Close up can be a problem with my camera
Shipping is free on S&W Forum for members. All items shipped with tracking and insurance.
Prefer Postal Money Orders only.
Dwayne Charron's book: "My Life Journey with Smith & Wesson". Signed and numbered copy. Still in the bubble pack. Photo shows what the book looks like, but you will receive one still sealed in the bag shown - $25.
Colt Python Barrel.
1x Original and excellent condition Colt 4 inch blued 357 Python vent rib barrel. This came off one of my Pythons and it was done by the Custom Shop back in the 19'80's. No front sight, but it is the style that uses the double pins. Clear barrel markings and almost perfect bore. Muzzle is nice and rib is undented. Requires gunsmith skill to install, but perfect if you want to make your longer barrel 8 or 6 inch Python a 4 incher; or build a Smolt or Cougar revolver! $150
S&W 1911 Army MTU 6 inch barrel from early 1960's.
1x Original blued S&W manufactured 1911 45 ACP match barrel. Unfitted and unmolested. Purchased from a military pistolsmith. One of the rare barrels as detail in Roy Jink's S&W book. Sought after by IPSC shooters back in the day for being a well done barrel. Solid blue finish and strong S&W markings. Better for a S&W collector, but if you want to rebuild your Swenson 1911 combat pistol or finally able to get around to building your 1970's IPSC shooter, this would be a fine barrel. $125
Note: Close up pic is not mine, but since my close up suck, I am using it. Barrel is guaranteed to have same markings. No marks on lugs, and this is not one of the later 1960's and 70's S&W Army replacement Match barrels.
S&W 439,539,459,559 Slide.
1x original blued S&W stripped slide. This was to be for my Hush Puppy retro pistol build, but future travel plans have put that on the back burner. All you have to do is add the rear sight parts, upgrade a tall front sight and add the safety and firing pin + wide/stronger extractor and your barrel/recoil spring . Bought from Bob's Guns (S&W parts dealer) back in the day. Today this part new from S&W costs over $400.
Only wear is some freckling near the ejection port, no problem if you are rebluing. now $150
Ruger Pistol Military Manuals:
1x Ruger GS32N Navy 357 marked manual with Ruger color cut a way wall chart + standard factory stainless pistol manual - $45 set (Rare Manual)
1x Ruger SS84L Embassy and Aircrew 38 manual with Ruger color cut a way chart + standard factory blued pistol manual - $35 set
MMC Miniature sights (Skeeter Skelton Style)
Last bots of my spare MMC sights. All these are from the 1970's, so offered at what I paid for them.
2x Wide dovetail High Standard sight bases (no flat springs) - $15 each
2x Small dovetail High Standard sight bases (no flat springs) - $15 each
4x .94 inch #2 White Outline rear sight blade (no elevation screw) $10 each.
USMC MUESOC 1911 sight set.
Original USMC PWS made front and rear sights for the full size 1911 MEUSOC pistol. This is my spare set as I had one built, and was going to have an Alongapo City Shooter done, but had it done in stainless instead.
Front and rear sight set - USMC pattern - new, rear fixed sight hand made on mill by PWS Magician (1 of 7), and front is modified Millett front - $150 shipped.
Sorry for the bad pics, but my macro setting sucks.
S&W K frame round butt combat stocks by Hogue.
-Custom built round butt, thought this was walnut, told this is Pau Ferro wood, finger groove pistol grips, done by Guy Hogue back in the day. Used to be on a S&W Model 66 snubby. Exceptional shape, 2 piece grips done before the Hogue Mono-grip patents. Only wear is on the bottom right rear from shooting at the 50 yard prone course of fire. Nice retro grips if you have a S&W K frame RB model. - $75 SOLD to 410bore.
Unusual Randall Firearms stainless steel Gen Curtis Lemay pistol magazine for 9mm Luger. Has finger ledge. Also fits other models like Kimber 9mm Compact and Colt Defender 9mm. I originally bought this back in 1986 to build a Colt 9x21mm pistol to carry in Italy when I was with the Navy since the agency I was with was required to carry revolvers and we were going against the Red Brigades. I never finished the 9mm Officer Frame/Commander slide special, but this mag can be used in the new Defender 9mm. This is for the left side mag release model and not one of the weird Left hand Randalls. Money back if not satisfied. Price is $75.
PM is best to get me.
Shipping is free on S&W Forum for members. All items shipped with tracking and insurance.
Prefer Postal Money Orders only.
Dwayne Charron's book: "My Life Journey with Smith & Wesson". Signed and numbered copy. Still in the bubble pack. Photo shows what the book looks like, but you will receive one still sealed in the bag shown - $25.
Colt Python Barrel.
1x Original and excellent condition Colt 4 inch blued 357 Python vent rib barrel. This came off one of my Pythons and it was done by the Custom Shop back in the 19'80's. No front sight, but it is the style that uses the double pins. Clear barrel markings and almost perfect bore. Muzzle is nice and rib is undented. Requires gunsmith skill to install, but perfect if you want to make your longer barrel 8 or 6 inch Python a 4 incher; or build a Smolt or Cougar revolver! $150
S&W 1911 Army MTU 6 inch barrel from early 1960's.
1x Original blued S&W manufactured 1911 45 ACP match barrel. Unfitted and unmolested. Purchased from a military pistolsmith. One of the rare barrels as detail in Roy Jink's S&W book. Sought after by IPSC shooters back in the day for being a well done barrel. Solid blue finish and strong S&W markings. Better for a S&W collector, but if you want to rebuild your Swenson 1911 combat pistol or finally able to get around to building your 1970's IPSC shooter, this would be a fine barrel. $125
Note: Close up pic is not mine, but since my close up suck, I am using it. Barrel is guaranteed to have same markings. No marks on lugs, and this is not one of the later 1960's and 70's S&W Army replacement Match barrels.
S&W 439,539,459,559 Slide.
1x original blued S&W stripped slide. This was to be for my Hush Puppy retro pistol build, but future travel plans have put that on the back burner. All you have to do is add the rear sight parts, upgrade a tall front sight and add the safety and firing pin + wide/stronger extractor and your barrel/recoil spring . Bought from Bob's Guns (S&W parts dealer) back in the day. Today this part new from S&W costs over $400.
Only wear is some freckling near the ejection port, no problem if you are rebluing. now $150
Ruger Pistol Military Manuals:
1x Ruger GS32N Navy 357 marked manual with Ruger color cut a way wall chart + standard factory stainless pistol manual - $45 set (Rare Manual)
1x Ruger SS84L Embassy and Aircrew 38 manual with Ruger color cut a way chart + standard factory blued pistol manual - $35 set
MMC Miniature sights (Skeeter Skelton Style)
Last bots of my spare MMC sights. All these are from the 1970's, so offered at what I paid for them.
2x Wide dovetail High Standard sight bases (no flat springs) - $15 each
2x Small dovetail High Standard sight bases (no flat springs) - $15 each
4x .94 inch #2 White Outline rear sight blade (no elevation screw) $10 each.
USMC MUESOC 1911 sight set.
Original USMC PWS made front and rear sights for the full size 1911 MEUSOC pistol. This is my spare set as I had one built, and was going to have an Alongapo City Shooter done, but had it done in stainless instead.
Front and rear sight set - USMC pattern - new, rear fixed sight hand made on mill by PWS Magician (1 of 7), and front is modified Millett front - $150 shipped.
Sorry for the bad pics, but my macro setting sucks.
S&W K frame round butt combat stocks by Hogue.
-Custom built round butt, thought this was walnut, told this is Pau Ferro wood, finger groove pistol grips, done by Guy Hogue back in the day. Used to be on a S&W Model 66 snubby. Exceptional shape, 2 piece grips done before the Hogue Mono-grip patents. Only wear is on the bottom right rear from shooting at the 50 yard prone course of fire. Nice retro grips if you have a S&W K frame RB model. - $75 SOLD to 410bore.
Unusual Randall Firearms stainless steel Gen Curtis Lemay pistol magazine for 9mm Luger. Has finger ledge. Also fits other models like Kimber 9mm Compact and Colt Defender 9mm. I originally bought this back in 1986 to build a Colt 9x21mm pistol to carry in Italy when I was with the Navy since the agency I was with was required to carry revolvers and we were going against the Red Brigades. I never finished the 9mm Officer Frame/Commander slide special, but this mag can be used in the new Defender 9mm. This is for the left side mag release model and not one of the weird Left hand Randalls. Money back if not satisfied. Price is $75.
PM is best to get me.
Last edited:
