**** SOLD PENDING FUNDS ****
Unfortunately, the costs of real-life have hit me up pretty hard and I have ultimately decided I don’t have room in my life right now for two custom 1911s, so this one has to go.
Nighthawk Custom Heinie Tactical Carry 1911 pistol
Features of the gun include:
- Built By Jeff Phillips
- 45ACP Caliber
- Government Size Carbon Steel Frame
- Carbon Steel 5” Slide
- Ball Cuts On Slide
- Flush Cut & Crowned Barrel
- Heinie Full Fit Barrel
- Heinie Internally Lightened Solid Long Trigger
- Heinie Magwell
- Flattened and Serrated Slide Top
- Serrated Rear of Slide
- Naked Slide Except for Heinie Logo Behind Cocking Serrations
- Heinie Logo Spring Plug
- Checkered Front Strap
- Checkered MSH
- Rounded Butt on MSH
- Heinie cut Straight Eight Slant Pro Tritium Night Sights (Tritium dated 2010). Also included is a spare set, including a Heinie Ledge Straight Eight Tritium Rear sight (0.140” notch), and spare front sight (Tritium dated 2012). Ledge Rear is currently mounted on the gun with original 2010 front sight. Slant Pro tritium rear (2010) and new spare tritium front sight (2012) are included.
- Diamond Black IonBond Finish on ENTIRE Gun Inside & Out (Frame, Slide, Barrel, Trigger, Small Parts)
- Ambi Safety Installed on gun. New Nighthawk Ambi Safety will be included as a spare part.
- Spare Fitted & Tuned Extractor (finished in Hard Chrome, not IonBond).
- (6) Nighthawk Custom 8 round magazines. These feed and lock back 100% in this gun.
- Nighthawk Custom pistol rug/bag.
- Lightweight cut / Aggressive Full Coverage Checkered Black Alumagrips
- Custom Wood Grips by Sarge of The Finer Grain made to fit Heinie magwell.
I bought this gun brand new in mid 2010. When it was newly built, it was finished in Metaloy hard chrome. In January 2011, I sent it in to be completely blacked out in Diamond Black IonBond. I will include the test targets from both when it was first built, and when it went back for the IonBond. When I did this, I neglected to include the spare extractor, so that is still finished in hard chrome.
The gun has had ~750 rounds through it. Only ~250 of which after being finished in Diamond Black IonBond. There is no wear on the external of the pistol, or on the barrel. There are very minor marks deep inside the magwell from magazine insertions, but you have to really look for them. The rear Ledge sight has a mark on one side from the sight pusher. The original Slant Pro sight that is included is fine.
This gun has been mostly a safe queen. I have carried it some, but I have typically had smaller/lighter guns to fill that role and this has spent most of its life in the safe. It is in almost perfect condition as the pictures will show. If there is a picture of something you would like to see, but I have not shown here, please let me know and I will be happy to oblige.
Price is $3,300 (payable by cash or certified bank check) shipped to your FFL.
There is some dust, smudges, and oil/grease visible in the photos - sorry. The finish is in 100% condition.
Unfortunately, the costs of real-life have hit me up pretty hard and I have ultimately decided I don’t have room in my life right now for two custom 1911s, so this one has to go.
Nighthawk Custom Heinie Tactical Carry 1911 pistol
Features of the gun include:
- Built By Jeff Phillips
- 45ACP Caliber
- Government Size Carbon Steel Frame
- Carbon Steel 5” Slide
- Ball Cuts On Slide
- Flush Cut & Crowned Barrel
- Heinie Full Fit Barrel
- Heinie Internally Lightened Solid Long Trigger
- Heinie Magwell
- Flattened and Serrated Slide Top
- Serrated Rear of Slide
- Naked Slide Except for Heinie Logo Behind Cocking Serrations
- Heinie Logo Spring Plug
- Checkered Front Strap
- Checkered MSH
- Rounded Butt on MSH
- Heinie cut Straight Eight Slant Pro Tritium Night Sights (Tritium dated 2010). Also included is a spare set, including a Heinie Ledge Straight Eight Tritium Rear sight (0.140” notch), and spare front sight (Tritium dated 2012). Ledge Rear is currently mounted on the gun with original 2010 front sight. Slant Pro tritium rear (2010) and new spare tritium front sight (2012) are included.
- Diamond Black IonBond Finish on ENTIRE Gun Inside & Out (Frame, Slide, Barrel, Trigger, Small Parts)
- Ambi Safety Installed on gun. New Nighthawk Ambi Safety will be included as a spare part.
- Spare Fitted & Tuned Extractor (finished in Hard Chrome, not IonBond).
- (6) Nighthawk Custom 8 round magazines. These feed and lock back 100% in this gun.
- Nighthawk Custom pistol rug/bag.
- Lightweight cut / Aggressive Full Coverage Checkered Black Alumagrips
- Custom Wood Grips by Sarge of The Finer Grain made to fit Heinie magwell.
I bought this gun brand new in mid 2010. When it was newly built, it was finished in Metaloy hard chrome. In January 2011, I sent it in to be completely blacked out in Diamond Black IonBond. I will include the test targets from both when it was first built, and when it went back for the IonBond. When I did this, I neglected to include the spare extractor, so that is still finished in hard chrome.
The gun has had ~750 rounds through it. Only ~250 of which after being finished in Diamond Black IonBond. There is no wear on the external of the pistol, or on the barrel. There are very minor marks deep inside the magwell from magazine insertions, but you have to really look for them. The rear Ledge sight has a mark on one side from the sight pusher. The original Slant Pro sight that is included is fine.
This gun has been mostly a safe queen. I have carried it some, but I have typically had smaller/lighter guns to fill that role and this has spent most of its life in the safe. It is in almost perfect condition as the pictures will show. If there is a picture of something you would like to see, but I have not shown here, please let me know and I will be happy to oblige.
Price is $3,300 (payable by cash or certified bank check) shipped to your FFL.
There is some dust, smudges, and oil/grease visible in the photos - sorry. The finish is in 100% condition.
Last edited:
