cshoff
Member
I have for sale a LIKE NEW H&K P7M8 pistol complete with matching factory box, two (2) factory original H&K magazines, operator's manual, cylinder cleaning brush and cylinder cleaning tool, as well as the factory sealed envelope containing the factory test-fired cartridge.
The serial numbers on the slide, the frame, and the factory box are all matching.
This gun is like new - not an imperfection on it. This is a 9X19mm (9mm Para, 9mm Luger, 9mm NATO) caliber and it has had a total of 16 factory-loaded rounds fired through it (2 magazines) in order to function test the gun. I have not, and don't plan on, cleaning the pistol before it is sold. Some people are particular about how their guns are cleaned and I figured the new owner might want to undertake that chore him/herself. Please be sure to take a close look at the picture of the underside of the slide. You can plainly see that the gun has only been fired the few rounds stated above.
The pistol was made in Oberndorf Germany and imported to Sterling, VA - the location of the H&K US Headquarters. I have included numerous photos in this thread to hopefully help answer any questions you may have about the gun. Please note that I intentionally "blurred" the last two digits of the serial numbers in each of the photos - but rest assured that they are factory perfect on the gun.
For those of you not familiar with the H&K P7 series firearms, these are the ultimate in shootability and reliability. They use a gas blow-back system and can, quite literally, reliably cycle round after round even with the extractor completely removed. Due to the gas blowback system and the extremely low bore axis, the recoil is diminished to the point that you can squeeze off accurate follow-up shots as fast as you can pull the trigger. These guns use a unique "squeeze cocker" system and are 100% safe from drop or bump fires. In addition, the use of the "squeeze cocker" system allows the gun to be equipped with a single-action trigger pull that is among the best in the world. This gun would be the ideal personal protection gun; it's small enough and light enough to easily conceal and carry, powerful enough to get the job done, very easy to shoot accurately, and reliable enough that it won't let you down.
I am asking $1250.00 for the gun. I will require an FFL transfer to whomever the new owner will be and I will split the cost of the transfer fee if there is any. I would like to sell this in-state (Missouri), but will make arrangements with an out of state buyer to ship from my FFL to yours for the actual shipping costs. I will also consider any reasonable offers.
In-state buyers: payment must be in cash - NO CHECKS, NO MONEY ORDERS, AND NO PAYPAL.
Out of state buyers: Payment by personal check or Post Office money order only. I will hold the firearm until the check or money order clears MY bank. Could take a week (or more) from the time I receive it.
To anyone interested: An "I'll take it" will give you first dibs at this gun on this forum, provided that it hasn't already been sold on one of the other sites it's listed on. I will make every effort to update this thread IMMEDIATELY if this gun sells on a different site.
I have NOT ruled out possible trades. If you have something of similar value you might want to trade, let me know what you have and I will consider it. I would consider guns, vehicles, ATV's, boats, or tools.
In addition to the gun, I will give the buyer the option to purchase a very slightly used Milt Sparks VM-2 IWB holster made specifically for the P7M8 pistol. This holster is $147 plus freight from Milt Sparks and you'd be looking at a VERY long wait time to get one if you did order it. With the purchase of the pistol, you can have this one for an additional $100.00. Pictures are included below.
I am also listing this on several other sites, so it could go at any time; first come, first served. Any questions at all can be posted here or sent to me via PM or email ([email protected]). I will reply at my earliest possible convenience.
Pictures are below and I have intentionally left them large so as to show plenty of detail:
Cocked:
Not cocked:
Chamber:
Underside of slide:
Factory sealed envelope containing test-fired cartridge:
Milt Sparks VM-2 Holster:
The serial numbers on the slide, the frame, and the factory box are all matching.
This gun is like new - not an imperfection on it. This is a 9X19mm (9mm Para, 9mm Luger, 9mm NATO) caliber and it has had a total of 16 factory-loaded rounds fired through it (2 magazines) in order to function test the gun. I have not, and don't plan on, cleaning the pistol before it is sold. Some people are particular about how their guns are cleaned and I figured the new owner might want to undertake that chore him/herself. Please be sure to take a close look at the picture of the underside of the slide. You can plainly see that the gun has only been fired the few rounds stated above.
The pistol was made in Oberndorf Germany and imported to Sterling, VA - the location of the H&K US Headquarters. I have included numerous photos in this thread to hopefully help answer any questions you may have about the gun. Please note that I intentionally "blurred" the last two digits of the serial numbers in each of the photos - but rest assured that they are factory perfect on the gun.
For those of you not familiar with the H&K P7 series firearms, these are the ultimate in shootability and reliability. They use a gas blow-back system and can, quite literally, reliably cycle round after round even with the extractor completely removed. Due to the gas blowback system and the extremely low bore axis, the recoil is diminished to the point that you can squeeze off accurate follow-up shots as fast as you can pull the trigger. These guns use a unique "squeeze cocker" system and are 100% safe from drop or bump fires. In addition, the use of the "squeeze cocker" system allows the gun to be equipped with a single-action trigger pull that is among the best in the world. This gun would be the ideal personal protection gun; it's small enough and light enough to easily conceal and carry, powerful enough to get the job done, very easy to shoot accurately, and reliable enough that it won't let you down.
I am asking $1250.00 for the gun. I will require an FFL transfer to whomever the new owner will be and I will split the cost of the transfer fee if there is any. I would like to sell this in-state (Missouri), but will make arrangements with an out of state buyer to ship from my FFL to yours for the actual shipping costs. I will also consider any reasonable offers.
In-state buyers: payment must be in cash - NO CHECKS, NO MONEY ORDERS, AND NO PAYPAL.
Out of state buyers: Payment by personal check or Post Office money order only. I will hold the firearm until the check or money order clears MY bank. Could take a week (or more) from the time I receive it.
To anyone interested: An "I'll take it" will give you first dibs at this gun on this forum, provided that it hasn't already been sold on one of the other sites it's listed on. I will make every effort to update this thread IMMEDIATELY if this gun sells on a different site.
I have NOT ruled out possible trades. If you have something of similar value you might want to trade, let me know what you have and I will consider it. I would consider guns, vehicles, ATV's, boats, or tools.
In addition to the gun, I will give the buyer the option to purchase a very slightly used Milt Sparks VM-2 IWB holster made specifically for the P7M8 pistol. This holster is $147 plus freight from Milt Sparks and you'd be looking at a VERY long wait time to get one if you did order it. With the purchase of the pistol, you can have this one for an additional $100.00. Pictures are included below.
I am also listing this on several other sites, so it could go at any time; first come, first served. Any questions at all can be posted here or sent to me via PM or email ([email protected]). I will reply at my earliest possible convenience.
Pictures are below and I have intentionally left them large so as to show plenty of detail:
Cocked:
Not cocked:
Chamber:
Underside of slide:
Factory sealed envelope containing test-fired cartridge:
Milt Sparks VM-2 Holster:
Last edited:
