Synthetic grip splitting on 686+

[TheBinarySon]

Hello! My 686 came with the default synthetic grips (not the Hogue ones), and I like them because they cover the backstrap. However, the grips are starting to split across the backstrap seam (see attached picture). If I run my finger along the seam, they separate and open up even more.

1.) Is there any way to fix this?
2.) Should I try taking them off and bending them back into shape?
3.) Should I glue them or something?
4.) Should I replace them (this is my conceal carry firearm)?
5.) If I do need to take them off, is the 3/32 hex screw the proper tool to remove the side grip screw?
6.) Any idea as to why this is happening?


Any help would be GREATLY appreciated!

 

[brucev]

Not sure what type synthetic grip is on your revolver, but some sort of super glue might work. Worth a shot! Sincerely. bruce.

 

[MetalMan]

For $30-40 you should be able to get a brand new set of synthetic grips.....

 

[bigwheelzip]

If memory serves me, the two OEM grip halves are separate pieces. They also might be under warranty. It's worth a call to the mother ship.

 

[krsmith58]

probably goes without saying but if you are going to try and glue them , take them off to do it . no offense , kenny

 

[Paul105]

You might try removing the grips and refitting to backstrap. Otherwise, you probably need a new set of grips --Kind of like replacing worn out tires.

Over the years, I've worn out 5 or 6 sets of 500 X frame Houges on different M69s, 329s, and 629s protecting the bone at the base of my thumb. Some rubber/syn just wear differently.

 

[uncleted327]

You can't take them off to glue them because they are two piece grips, not that I would even consider trying to glue two piece grips together. If you take them off and reinstall and they still don't come together tight then call S&W, I'm sure they will replace them for you. Or just order a different set. Leave the glue in the tube.

 

[bronco45]

New Grips, especially of this is a EDC.

 

[jbtrucker]

You might be able to find S&W round butt rubber grips ebay or buy new Hogue or Pachmayr.

 

[sparkyvega]

Yeow!

You might try removing the grips and refitting to backstrap. Otherwise, you probably need a new set of grips --Kind of like replacing worn out tires.

Over the years, I've worn out 5 or 6 sets of 500 X frame Houges on different M69s, 329s, and 629s protecting the bone at the base of my thumb. Some rubber/syn just wear differently.