Tattered/crushed/mutilated factory blue box question?

Moon

Member
Joined
Mar 5, 2007
Messages
64
Reaction score
73
Recently acquired a 1972'ish M41.
The man I purchased the gun from was the original owner.
He had the original blue logo box.
The box is in very poor bad condition. Crushed and torn away on the corners.
I know to keep the box.

My question is this: Is it a bad idea to carefully wrap the box in clear wrapping tape to strengthen the corners and protect the box from further damage/deterioration? It would only wrap the corners of the top and bottom sections.

Leave as is?
 
Register to hide this ad
Leave it like it is!
Or it could wind up looking like this one-
 

Attachments

  • 88A7678C-5982-4788-AF1A-3353CFD70B98.jpg
    88A7678C-5982-4788-AF1A-3353CFD70B98.jpg
    104.5 KB · Views: 188
DO NOT use any tape. You can repair separated seams/corners with craft glue (Elmers) and some simple tools.

This is my box repair kit:

attachment.php


Apply a small amount of glue to each edge of the seam. Position the separated edges together, place a corner brace on the inside and clamp it in place. Let it set-up for a day before removing the clamps and braces. If necessary you can put a large rubber band around the outside of the box to pull the edges together.

This type of repair is reversible and causes no additional damage. I've saved more than a few boxes with this technique and the repair is barely noticeable.
 

Attachments

  • IMG_4106.jpg
    IMG_4106.jpg
    83.3 KB · Views: 410
This box is in such bad shape I doubt the corners can even be glued back together. It’s smushed.
I’ll piddle around with it when I get the time.
 
If the box cannot be used why is it important?

Is it because everything that comes from Smith and Wesson is collectable?
 
I found a old S&W box in my dad's garage. Someone had already taped the corners of it. I've kept it for years, kinda hard to throw it out.


box2-X2.jpg


box3-X2.jpg
 
I find it quite relaxing and rewarding to help an old box along with glue and clamps. You are not going to use it for shipping and it looks neat on the shelf of the shop. And yes Virginia, old S&W stuff is collectable to a lot of us. Heck, I saw a guy at a show who collected and fixed cereal boxes.
 
Box Repair

DO NOT use any tape. You can repair separated seams/corners with craft glue (Elmers) and some simple tools.

This is my box repair kit:

attachment.php


Apply a small amount of glue to each edge of the seam. Position the separated edges together, place a corner brace on the inside and clamp it in place. Let it set-up for a day before removing the clamps and braces. If necessary you can put a large rubber band around the outside of the box to pull the edges together.

This type of repair is reversible and causes no additional damage. I've saved more than a few boxes with this technique and the repair is barely noticeable.

I still have the original box and papers for my model 27-2 nickel 6”. The LGS where I got it new in 1973 put his price tag with the business name and $175 written in. Somehow 2 of the box corners broke. I will give your repair technique a try.

My interest in S&Ws covers Hand Ejectors from 1899 to the end of the pinned barrel era. It was also around this time that the 2 piece box went away. The two piece boxes were a nice touch while the one piece folding cover box looks cheap.
 
DO NOT use any tape. You can repair separated seams/corners with craft glue (Elmers) and some simple tools.

This is my box repair kit:

attachment.php


Apply a small amount of glue to each edge of the seam. Position the separated edges together, place a corner brace on the inside and clamp it in place. Let it set-up for a day before removing the clamps and braces. If necessary you can put a large rubber band around the outside of the box to pull the edges together.

This type of repair is reversible and causes no additional damage. I've saved more than a few boxes with this technique and the repair is barely noticeable.




But with all respect shouldn't you use this??:D:D
iu
 
Back
Top