TruGlo Tru-Brite Open Red Dot???

[thousandstar]

I'm looking at a TruGlo Tru-Brite Open Red Dot, anyone had any experence with this sight? Also what riser will I need if any?
Thanks

 

[ballistictoyz]

i have one on my 10/22 it seems to be holding up alright

 

[Ray95]

I have one on my MOE but haven't had a chance to try it out YET. I'll report back once I put a few rounds thru it.

 

[dawgfan76]

That's the one I have on my 15-22. Nice for the money. Mine's mounted right at the end of the rail just before the barrel starts. I had it further up, but moved it back because I'm changing to a free float hand guard.

Co-witnesses right out of the box with the factory sights.

I have and will recommend it again.

 

[VMaxSplat]

It will cowitness on a flattop AR but is cheap Chinese junk. Mine was a bear to zero and doesn't hold zero well. It will work on a 15/22 but there are better options for a bit more $$$.

 

[Ray95]

I finally got to try mine out the other night. gunsmit wasn't in but I zeroed in the sight myself at about 10yd. I know it isn't perfect but at that distance I was happy with the performance. I'll work on getting it right for longer range later down the road. and we'll see how it holds up.

 

[VMaxSplat]

I finally got to try mine out the other night. gunsmit wasn't in but I zeroed in the sight myself at about 10yd. I know it isn't perfect but at that distance I was happy with the performance. I'll work on getting it right for longer range later down the road. and we'll see how it holds up.

Did you have problems with a large zero shift when the adjustment lock screws were tightened down after the initial zero? That is one of the most aggravating things about mine.