Another Lubrication Thread

Joined
Aug 11, 2013
Messages
7,793
Reaction score
53,211
Location
RI/ Savannah, GA
I know that this topic has been thrown around forever and the choices and recommendations are so extensive it makes my hair hurt.
So I made a decision on how to deal with this. I did some research on Wilson Combat, and came up with this resolution. They sell lube, and they address lubrication on their website. I wrote them a note asking if they have one lube recommended for all semi's.

They seem to address 9mm and being different requirements from 45 acp.

When I get their answer, I will buy their products and use accordingly. They should know

Case closed
 
Register to hide this ad
I know that this topic has been thrown around forever and the choices and recommendations are so extensive it makes my hair hurt.
So I made a decision on how to deal with this. I did some research on Wilson Combat, and came up with this resolution. They sell lube, and they address lubrication on their website. I wrote them a note asking if they have one lube recommended for all semi's.

They seem to address 9mm and being different requirements from 45 acp.

When I get their answer, I will buy their products and use accordingly. They should know

Case closed

They'd probably scream if they knew I use grease on the slide and frame rails of my 1911's. They can rest easy, though, none of them are Wilson Combat.
 
Viscosity: Thicker in summer and thinner in winter, to no oil in temperatures below freezing.

10W-30 motor oil works great regardless of caliber.

For your M19 grenade launcher, use the lube Connie recommends!

6FBDTkU.jpeg
 
Last edited:
Different type of lubing!

For Cap & Ball revolvers, the internals need lubed with "Gun Oil" the ball needs lubes with a thick grease to soften powder fouling. In Cold weather, fill the chamber over the ball with Crisco or Lard. In hot weather use a 50/50 mix of paraffine and Crisco.

There is a product called Bore Butter, it's great for in the cold weather shooting, and even lubing the mechanicals in warm weather, but it runs like honey when warm out. (Many holsters have been saturated by flowing Bore Butter!)

We found Bore Butter to be a good substitute for Cosmoline when long term storage or burying in a cashe.

Ivan
 
Last edited:
Break Free CLP works for anything.
Expect Wilson to recommend some “specially blended “ oil(s) “developed” by them, and overpriced like every other thing they sell.
Not saying their products and guns are bad; they have figured out that to a lot of potential customers higher cost always correlates to higher quality.
Other companies manage to sell equal quality at half the price.

I should also mention that I actually clean with Hoppes#9, and use Break Free for lubrication and rust prevention.
 
Last edited:
Back
Top